Command: 3darray  Select objects:  1 found Select objects:  Enter the type of array [Rectangular/Polar] :p  Enter the number of items in the array:

Slides:



Advertisements
Similar presentations
How to create leaders to indicate details or callouts in AutoCAD.
Advertisements

ENGT 122 – CAD I Chapter 6 – Editing With Grips. Get a Grip! What are Grips? Small squares displayed on an object at its definition points when selected.
ENGT122 - CADI Chapter 13 - Hatching.
PLEASE USE THE ENTER KEY RIGHT CLICK ON THE MOUSE TO ADVANCE
Title Blocks and Lettering
ENGR-22_Lec-29_SolidModel-2.ppt 1 Bruce Mayer, PE Engineering 22 – Engineering Design Graphics Bruce Mayer, PE Licensed Electrical.
Chapter 9: Hatching, Gradients and Boundaries. After completing this Chapter, you will be able to use the following features: What is Hatching? What is.
By Paul Richard and Jim Fitzgerald Chapter 9 - Drawing and Editing Complex Objects.
PLOTTING SCALE MODEL / LAYOUT PLOTSYTLE “.ctb” FFD 201 – PLOTTING.
Chapter 9: Hatching, Gradients and Boundaries. What is Hatching? What is Gradient Fill? Defining the Hatch or Gradient Boundary Create hatch and gradient.
Section 1 Introduction to Drafting
Using the Drafting Workbench R. Lindeke IE Before Entering the Drafting WB Create the Part in Handout: I used a Master Sketch For the Base 2’ary.
Civil 114 Civil Engineering Drawing AutoCAD
Grove City High School Ms. Bruce. Week 1  This week Basic Commands Basic Saving Basic Printing.
CIVL 114 Civil Engineering Drawing
CVEV 118/698 AutoCAD 2000 Lecture 1 Prof. Mounir Mabsout Elsa Sulukdjian Walid El Asmar.
Faculty of Electrical Engineering 1 Lecture : En. Syahrom Bin Zakaria EC202 COMPUTER AIDED DESIGN.
Pictorials with AutoCAD Class 8.2 : Using AutoCAD to Create Pictorial Drawings Thursday, October 21 st 2004.
Views and Viewports1 Sacramento City College EDT 310.
Chapter 4: Fundamentals III. After completing this Chapter, you will be able to use the following features: Advanced Drawing commands Construction commands.
Command: _insert  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: 65,40  Command:
Chapter 3: Fundamentals II. After completing this Chapter, you will be able to do the following: Drafting Settings Command Enhancer Dynamic Input, On-Screen.
1 AutoCAD: Secrets Every User Should Know Chapter 6 – Plotting.
What is AutoCAD? A software drafting tool Particularly useful for Mechanical drawings Architectural drawings.
SDC PUBLICATIONS © 2011 Chapter 7 Templates and Plotting Learning Objectives:  Set up the AutoCAD Plot Style option.  Create a Template file.  Use the.
© 2010 Delmar, Cengage Learning Chapter 3 Setting Up A Document.
Introduction to AutoCAD Engineering Drawings
ENGR-22_Lec-27_SurfaceModel-2.ppt 1 Bruce Mayer, PE Engineering 22 – Engineering Design Graphics Bruce Mayer, PE Licensed Electrical.
Chapter 11: Block References and Attributes. After completing this Chapter, you will be able to use the following features: Create and insert block references.
1 Computer Aided Engineering Drawing Editing Tools in AutoCAD Chapter No 4 Sir Syed University of Engineering & Technology Computer Engineering Department.
AutoCAD 3D Fundamentals
I NTRODUCTION TO A UTO CAD P ART 2 Lab 8. CHAPTER OBJECTIVES Creating New Layers Assigning Colors to Layers Assigning Linetypes Assigning Lineweight Changing.
Chapter 8: Plotting. After completing this Chapter, you will be able to use the following features: Planning the Plot Sheet Plotting Environments Plotting.
EDT Chapter 13 - Obtaining Drawing Information1 Obtaining Information About The Drawing Sacramento City College EDT 310.
Unit 1: Plotting DT2510: Advanced CAD Methods. Identifying the user interface: Application menu Quick Access toolbar InfoCenter Ribbon Drawing window.
Computer Aided Engineering Drawing
By Paul Richard and Jim Fitzgerald Chapter 7 – Basic Editing Techniques.
Grips - Automatic Editing1 Sacramento City College Engineering Design Technology.
Introduction to Drafting and Design In order to begin our drawing we have to set the drawing limits or the paper size.
LAYERS AND OBJECT PROPERTIES. Topics OBJECT PROPERTIES LAYERS OBJECTS AND LAYERS Creating and Naming Layers Making a Layer Current Sorting Layers Controlling.
Paper Space 1 Paper space/Model space Model space only so far Paper space –Same model, different presentations using paper space.
3 Floor Plan Block Out Georgian House Continues. Commands Layer Properties Loading linetype – Hidden – Center – Center2 – Centerx2 – Global Scale 24 –
Introduction to A+CAD. Objectives Understand fundamental CAD concepts Start A+CAD Tour the A+CAD interface Explore the different A+CAD data input methods.
Layouts, Plotting, Printing1 Sacramento City College Engineering Design Technology.
UNIT 4: AutoCAD Drawing Commands Objectives: Be able to identify, describe and/or apply… AutoCAD tools (Line, polyline, arcs, circles, rectangles, hatch.
Layer Filters1 Sacramento City College Engineering Design Technology.
Certification Exam Guide Rebecca J. Conner
Chapter 2 – Quick Start. Create a new drawing Saving your work Switch between Layout Space and Model Space Draw some basic AutoCAD objects Toggle the.
AutoCAD Tutorial (introductory level). 1. Working environment : Drawing area, Menus, Tools bars, Buttons. 2. Interaction: How to execute a command. 4.
Week 6 Drafting 1309: Basic CAD Andrew Amini Professor Drafting and Design Engineering Technology, HCC.
Drawing Geometric Objects
Text , Dimension and Mark of Engineering Draw
Welcome! Drafting 1309: Basic CAD
Model Space and Paper Space
Basic Editing Commands
Welcome! Drafting 1309: Basic CAD
Chapter One Viewing an Object
Chapter 3: Fundamentals II
BASIC DRAWING COMMANDS FOR AUTOCAD
CVEV 118/698 AutoCAD 2000 Lecture 1 Prof. Mounir Mabsout Elsa Sulukdjian Walid El Asmar.
Module 1.
Obtaining Information About The Drawing
Learning Objectives: Edit dimensions.
Sacramento City College EDT 310
Layouts, Plotting, Printing
Engineering Design Technology Sacramento City College
What is AutoCAD? AutoCAD is a CAD (Computer Aided Design or Computer Aided Drafting) software application for 2D and 3D design and drafting.
Sacramento City College EDT 310
Layouts, Plotting, Printing
Week 10 Drafting 1309: Basic CAD
Presentation transcript:

Command: 3darray  Select objects:  1 found Select objects:  Enter the type of array [Rectangular/Polar] :p  Enter the number of items in the array: 3  Specify the angle to fill (+=ccw, -=cw) :  Rotate arrayed objects? [Yes/No] :  Specify center point of array: 0,0  Specify second point on axis of rotation: 0,0,20  Command: hi  HIDE Regenerating model.

Command: rotate3d  Current positive angle: ANGDIR=counterclockwise ANGBASE=0 Select objects:  1 found Select objects:  Specify first point on axis or define axis by [Object/Last/View/Xaxis/Yaxis/Zaxis/2points]: y  Specify a point on the Y axis :  Specify rotation angle or [Reference]: -150  Command: hi  HIDE Regenerating model.

Command: mirror3d  Select objects:  1 found Select objects:  Specify first point of mirror plane (3 points) or [Object/Last/Zaxis/View/XY/YZ/ZX/3points] : zx  Specify point on ZX plane :  Delete source objects? [Yes/No] :  Command: hi  HIDE Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 4  Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : SI  Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : H  Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : V  Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : A  Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : B  Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : L  Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : R  Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 2  Enter a configuration option [Horizontal/Vertical] :  Regenerating model.

Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 2  Enter a configuration option [Horizontal/Vertical] : H  Regenerating model.

Command: limits  Reset Model space limits: Specify lower left corner or [ON/OFF] :  Specify upper right corner : 120,80  Command: m  MOVE Select objects: 1 found Select objects:  Specify base point or displacement: 40,40  Specify second point of displacement or : 40,80 

Command: ti  TILEMODE Enter new value for TILEMODE : 0  Regenerating layout. Command: limits  Reset Paper space limits: Specify lower left corner or [ON/OFF] :  Specify upper right corner : 210,297  Command: Z  ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window] : A  Regenerating layout. Command: mview  Specify corner of viewport or [ON/OFF/Fit/Hideplot/Lock/Object/Polygonal/Restore/2/3/4] : R  Enter viewport configuration name or [?] :  Specify first corner or [Fit] : 20,10  Specify opposite corner: 200,287  Regenerating model.

Command: mspace  Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: N  Enter name(s) of new layers frozen in all viewports: corp,sectiune,hasuri,axe-princ,axe-sus, axe-st  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: 

Command: ti  TILEMODE Enter new value for TILEMODE : 1  Regenerating model. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : SI  Regenerating model.

Command: change  Select objects: 40,0  1 found Select objects:  Specify change point or [Properties]: P  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA  Enter new layer name : corp  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: 

Command: section  Select objects: 40,40  1 found Select objects:  Specify first point on Section plane by [Object/Zaxis/View/XY/YZ/ZX/3points] : ZX  Specify a point on the ZX-plane : 0,60  Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF  Enter name list of layer(s) to turn off: corp  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

Command: ucs  Current ucs name: *WORLD* Enter an option [New/Move/orthoGraphic/Prev/Restore/Save/Del/Apply/?/World] : N  Specify origin of new UCS or [ZAxis/3point/OBject/Face/View/X/Y/Z] : OB  Select object to align UCS: 0,60 

Command: change  Select objects: 0,0  1 found Select objects: Specify change point or [Properties]: P  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA  Enter new layer name : sectiune  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:  Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: LW  Enter lineweight (0.0mm mm): 0.8  Enter name list of layers(s) for lineweight 0.80mm : sectiune  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S Enter layer name to make current : sectiune  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

Command: -layer  Current layer: "sectiune" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S  Enter layer name to make current : hasuri  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

Command: -bhatch  Current hatch pattern: ANGLE Specify internal point or [Properties/Select/Remove islands/Advanced]: P  Enter a pattern name or [?/Solid/User defined] : ansi31  Specify a scale for the pattern : 0.5  Specify an angle for the pattern :  Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 4,3  Analyzing internal islands... Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 8,25  Analyzing internal islands... Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 6,55  Analyzing internal islands... Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 5,76  Analyzing internal islands... Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 

Command: -layer  Current layer: "hasuri" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S  Enter layer name to make current : axe-princ  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

Command: ti  TILEMODE Enter new value for TILEMODE : 0  Regenerating layout. Regenerating model.

Command: -layer  Current layer: "axe-princ" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S  Enter layer name to make current : 0  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:  Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T  Enter layer name(s) to thaw: sectiune,hasuri,axe-princ  Enter an option [All/Select/Current] :  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:  Regenerating layout. Regenerating model. Command: vpoint  Current view direction: VIEWDIR= , , Specify a view point or [Rotate] : 0,-1,0  Regenerating model. Grid too dense to display

Command: z  ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window] : S  Enter a scale factor (nX or nXP): 1XP  Grid too dense to display

Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T  Enter layer name(s) to thaw: corp  Enter an option [All/Select/Current] : Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:  Regenerating layout. Regenerating model. Grid too dense to display Command: vpoint  Current view direction: VIEWDIR= , , Specify a view point or [Rotate] : 0,0,1  Regenerating model.

Command: _solprof  Select objects: 40,40  1 found Select objects:  Display hidden profile lines on separate layer? [Yes/No] :  Project profile lines onto a plane? [Yes/No] :  Delete tangential edges? [Yes/No] :  One solid selected. Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: F  Enter layer name(s) to freeze: corp  Enter an option [All/Select/Current] : Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:  Command: vpoint  Current view direction: VIEWDIR=0.0000,0.0000, Specify a view point or [Rotate] : -1,-1,1  Regenerating model.

Command:  Grid too dense to display vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T  Enter layer name(s) to thaw: corp  Enter an option [All/Select/Current] : Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:  Regenerating layout. Regenerating model. Grid too dense to display

Command: vpoint  Current view direction: VIEWDIR= , ,  Specify a view point or [Rotate] : -1,0,0  Regenerating model. Grid too dense to display

Command: _solprof  Select objects: 40,40  1 found Select objects:  Display hidden profile lines on separate layer? [Yes/No] :  Project profile lines onto a plane? [Yes/No] :  Delete tangential edges? [Yes/No] :  One solid selected. Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: F  Enter layer name(s) to freeze: corp  Enter an option [All/Select/Current] :  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: 

Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: ?  Enter layer name(s) to list :  Layer name State Color Linetype Lineweight "0" on -P 7 (white) "Continuous" Default "axe" on -P 7 (white) "CENTER2" Default "axe-princ" on -P 7 (white) "CENTER2" Default "axe-st" on -P 7 (white) "CENTER2" Default "axe-sus" on -P 7 (white) "CENTER2" Default "corp" on -P 7 (white) "Continuous" Default "cote" on -P 7 (white) "Continuous" Default "Defpoints" on 7 (white) "Continuous" Default "f-inv" on -P 7 (white) "DASHED2" mm. "f-viz" on -P 7 (white) "Continuous" mm. "hasuri" on -P 7 (white) "Continuous" Default "l-s-viz" on -P 7 (white) "Continuous" Default

"PH-36E" on -P 7 (white) "Continuous" Default "PH-370" on -P 7 (white) "Continuous" Default "PV-36E" on -P 7 (white) "Continuous" Default "PV-370" on -P 7 (white) "Continuous" Default "sectiune" on -P 7 (white) "Continuous" mm. Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: LW  Enter lineweight (0.0mm mm): 0.8  Enter name list of layers(s) for lineweight 0.80mm : PV-36E,PV-370  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: L  Enter loaded linetype name or [?] : dashed2  Enter name list of layer(s) for linetype "dashed2" : PH-36E,PH-370  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:  Regenerating layout. Regenerating model. Grid too dense to display

Command: pspace

Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: N  Enter name list for new layer(s): fer  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: C  Enter color name or number (1-255): blue  Enter name list of layer(s) for color 5 (blue) : fer  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:  Command: change Select objects: 70,287 1 found Select objects: 140,287 1 found, 2 total Select objects: 70,10 1 found, 3 total Select objects: 140,10 1 found, 4 total Select objects: Specify change point or [Properties]: p Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: la Enter new layer name : fer Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:

Command: change  Select objects: 70,287  1 found Select objects: 140,287  1 found, 2 total Select objects: 70,10  1 found, 3 total Select objects: 140,10  1 found, 4 total Select objects:  Specify change point or [Properties]: P  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA  Enter new layer name : fer  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: 

Command: stretch  Select objects to stretch by crossing-window or crossing-polygon... Select objects: c  Specify first corner: 0,20  Specify opposite corner: 210,0  2 found Select objects:  Specify base point or displacement: 0,0  Specify second point of displacement: 0,30  Command: e  ERASE Select objects: 140,40  1 found Select objects: 

Command: m  MOVE Select objects: 70,40  1 found Select objects:  Specify base point or displacement: 0,0  Specify second point of displacement or : 0,-10 

Command: stretch  Select objects to stretch by crossing-window or crossing-polygon... Select objects: c  Specify first corner: 0,143  Specify opposite corner: 125,115  1 found Select objects:  Specify base point or displacement: 0,145  Specify second point of displacement: 0,115 

Command: stretch  Select objects to stretch by crossing-window or crossing-polygon... Select objects: c  Specify first corner: 0,297  Specify opposite corner: 210,260  2 found Select objects:  Specify base point or displacement: 0,297  Specify second point of displacement: 0,267 

Command: stretch  Select objects to stretch by crossing-window or crossing-polygon... Select objects: c  Specify first corner: 0,180  Specify opposite corner: 210,130  2 found Select objects:  Specify base point or displacement: 0,0  Specify second point of displacement: 0,30 

Command: m  MOVE Select objects: W  Specify first corner: 0,270  Specify opposite corner: 210,160  3 found Select objects:  Specify base point or displacement: 0,270  Specify second point of displacement or : 0,250  Command:  MOVE Select objects: 20,50  1 found Select objects:  Specify base point or displacement: 0,50  Specify second point of displacement or : 0,70 

Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/ LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF  Enter name list of layer(s) to turn off: fer  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/ LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

Command: m  MOVE Select objects: c  Specify first corner: 55,30  Specify opposite corner: 180,220  2 found Select objects:  Specify base point or displacement: 0,0  Specify second point of displacement or : 10,0 

Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/ LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF  Enter name list of layer(s) to turn off: hasuri,fer  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/ LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

Command: l  LINE Specify first point: 40,130  Specify next point or  Specify next point or [Undo]:  Command: change  Select objects: 42,130  1 found Select objects:  Specify change point or [Properties]: P  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LW  Enter new lineweight : 1  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:  Command: _leader  Specify leader start point: 42.5,130  Specify next  Specify next point or [Annotation/Format/Undo] :  Enter first line of annotation text or :  Enter an annotation option [Tolerance/Copy/Block/None/Mtext] : N 

Command: explode  Select objects: c  Specify first corner: 35,128  Specify opposite corner: 50,120  1 found Select objects:  Command: scale Select objects: c Specify first corner: 35,128 Specify opposite corner: 50,120 2 found Select objects: Specify base point: 42.5,130 Specify scale factor or [Reference]: 1.5

Command: -block  Enter block name or [?]: estsh  Specify insertion base point: 45,130  Select objects: W  Specify first corner: 35,132  Specify opposite corner: 50,120  3 found Select objects:  Command: ucs  Current ucs name: *WORLD* Enter an option [New/Move/orthoGraphic/Prev/Restore/Save/Del/Apply/?/World] : N  Specify origin of new UCS or [ZAxis/3point/OBject/Face/View/X/Y/Z] : 42.5,130  Grid too dense to display Command: ucsicon  Enter an option [ON/OFF/All/Noorigin/ORigin] : OR 

Command: -attdef  Current attribute modes: Invisible=N Constant=N Verify=N Preset=N Enter an option to change [Invisible/Constant/Verify/Preset] :  Enter attribute tag name: ts  Enter attribute prompt: Majuscula  Enter default attribute value: A  Current text style: "a508" Text height: Specify start point of text or [Justify/Style]: -8,-8  Specify rotation angle of text :  Command: -block  Enter block name or [?]: esh  Specify insertion base point: 2.5,0  Select objects: w  Specify first corner: -10,10  Specify opposite corner: 10,-15  4 found Select objects: 

Command: -insert  Enter block name or [?] : esh  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]:  Enter X scale factor, specify opposite corner, or [Corner/XYZ] :  Enter Y scale factor :  Specify rotation angle :  Enter attribute values Majuscula : A 

Command: -insert  Enter block name or [?] : rug  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: _nea to Enter X scale factor, specify opposite corner, or [Corner/XYZ] :  Enter Y scale factor :  Specify rotation angle :  Command: -insert  Enter block name or [?] :  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: nea to Enter X scale factor, specify opposite corner, or [Corner/XYZ] :  Enter Y scale factor :  Specify rotation angle : 90  Enter attribute values Rugozitatea : Ra3,2 

Command: -insert  Enter block name or [?] :  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: nea to Enter X scale factor, specify opposite corner, or [Corner/XYZ] :  Enter Y scale factor :  Specify rotation angle : 180  Enter attribute values Rugozitatea : Ra12,5 

Command: -attedit  Edit attributes one at a time? [Yes/No] :  Enter block name specification :  Enter attribute tag specification :  Enter attribute value specification :  Select Attributes: 1 found Select Attributes:  1 attributes selected. Enter an option [Value/Position/Height/ Angle/Style/Layer/Color/Next] : A  Specify new rotation angle : 0  Enter an option [Value/Position/Height/ Angle/Style/Layer/Color/Next] : P  Specify new text insertion point  Enter an option [Value/Position/Height/ Angle/Style/Layer/Color/Next] : 

Feedback: Privacy Policy Feedback
Do Not Sell My Personal Information
About project: SlidePlayer Terms of Service

© 2025 SlidePlayer.com. Inc. All rights reserved.