Merkmale SITRANS T Automation and Drives Process Instrumentation and Analytics Common Technical Data (1) Technical Data (2) Features Block Diagram Housings SITRANS T Universal Transmitter  For all common sensors  User-specific characteristic  Programming in only one minute  Universal power supply (AC or DC)  Output: DC current or DC voltage  Sensor fault / limit monitor (option)  Intrinsically-safe input (option) Folie 1 von 6/ 08/ 02 Common

Merkmale SITRANS T Automation and Drives Process Instrumentation and Analytics Common Technical Data (1) Technical Data (2) Features Block Diagram Housings SITRANS T Universal Transmitter Two-wire or four-wire transmitter available Housings for 19” rack and rail mounting Delivery ex stock Folie 2 von 6/ 08/ 02 Housings

Merkmale SITRANS T Automation and Drives Process Instrumentation and Analytics Common Technical Data (1) Technical Data (2) Features Block Diagram Housings SITRANS TK-H Head mounted temperature transmitter Technical Data Input range Ohm, mV Output mA, HART 5.x Dimensionsø= 44 mm, h= 26,3 mm Galvanic 500 V isolation Hazardous areaEx n for Zone 2 certificationEEx ia IIC T4 Folie 3 von 6/ 08/ 02 Technical Data (1)

Merkmale SITRANS T Automation and Drives Process Instrumentation and Analytics Common Technical Data (1) Technical Data (2) Features Block Diagram Housings SITRANS TK-H Head mounted temperature transmitter Technical Data Dig. accuracy e.g.: Pt °C Temp. effect typ. 30 ppm/°C Relative humidity < 98%, with condensation Ambient temperature -40 °C °C range Power supply V (28V at EEx ia) Folie 4 von 6/ 08/ 02 Technical Data (2)

Merkmale SITRANS T Automation and Drives Process Instrumentation and Analytics Common Technical Data (1) Technical Data (2) Features Block Diagram Housings SITRANS TK-H Head mounted temperature transmitter The most important features for all industries i.e. chemical, energy, machine builder online communication via standard protocol HART 5.x for all common temperature sensors compact design allows mounting in small housings explosion protection Ex n for zone 2 and EEx ia IIC galvanic isolation 500 V also suitable for potentiometer or mV-signals easy setup and service with PC or Hand Held Communicator suitable for SIMATIC link via PROFIBUS / HART interface Folie 5 von 6/ 08/ 02 Features

Merkmale SITRANS T Automation and Drives Process Instrumentation and Analytics Common Technical Data (1) Technical Data (2) Features Block Diagram Housings SITRANS TK-H Head mounted temperature transmitter Folie 6 von 6/ 08/ 02 Block Diagram ADMC DA load Galvanic Isolation TC RTD Sensor SITRANS TK-H Power Supply HART ® Modem Configuration and Service