PSGTECHS COE INDUTECH Presentation on Standards required for INDUTECH on

PSGTECHS COE INDUTECH COE for INDUTECH was established in March 2011 It caters to all the INDUTECH product development, research, prototyping and consultancy We are in the process of developing INDUTECH products in Phase I Standards have to be formulated for these products A committee is formulated for making standards for INDUTECH products

STANDARDS AVAILABLE BIS standards are available for the following INDUTECH products: Decatising cloth Conveyor belts Drive belts Ropes and cordages Filter cloth Filtration products

STANDARDS TO BE DEVELOPED Standards have to be developed for the following INDUTECH products: Bolting cloth AGM battery separators Cigarette filters Coated abrasives Computer printed ribbon Printed circuit boards Paper making fabrics Industrial brushes

PRODUCTS IDENTIFIED Currently, the following are some of the other identified products for which BIS standards are not available. Automotive Carpets Nonwoven scrubs Oil sorption pads Dry Wipes Insulation for extreme climates Acoustic layer

Products-Available International Standards ProductsInternational standards Remarks Oil sorbent padASTM F Acoustic measurement ISO Nonwoven wipesASTM D Withdrawn FiltersASTM D Filtration efficiencyISO Thermal insulationASTM C Housing and other buildings Printed circuit board IPC 4412

STANDARDS FOR INDUTECH Standards to be Developed – COE contribution Standards to be identified and developed for new products in association with BIS and applicable industry. Developing BIS standards for all the identified INDUTECH products Standards are not available for nonwoven INDUTECH products made out of NATURAL FIBRES. Eg., Fibres for oil spill removal, Fibres for acoustic barriers, etc.,

STANDARDS FOR INDUTECH PHASE I The following products are being developed by PSGTECHS COE INDUTECH in Phase I: Natural fibre pad for oil spill removal Natural fibre nonwoven for acoustic barrier Natural fibre nonwoven scrubs

STANDARDS FOR INDUTECH Standards will be developed by the COE and sent to BIS for approval Similarly we will work with BIS in creating more standards for all INDUTECH products.