Introduction to a pit-less lever scale “concrete deck” The scale to be shown is a B-Tek Side/rail Side/lever electromechanical Platform is 60’x11’ on a pier design foundation The foundation has (2) 10’approaches The scale utilizes a heavily reinforced concrete deck “Field installed” The scale has 8” clearance Features: Only (2) tension load cells and a (4) section lever system. Safety side rails are part of the scale’s design. 6” heavily reinforced concrete deck poured on top of the cross channels 11’ wide inside the beams no extra charge. Dependable lever system design and only (2) load cells minimize exposure to lightning.

Unloading levers and bridges Shows completed foundation and scale being unloaded

Setting the levers Outboard designed levers being set on the piers Notice the four section design with the two stands for the load cells

Scale installed Shows the outboard levers with the two load cell stands Notice the 9’ slab toward the center of the scale for the scale house

Scale installed opposite view Shows view of the scale from opposite the levers system Notice the heavy duty side rails

Top View Scale top view before concrete deck Back-up sheeting and reinforcing to be install on top of cross channels

Deck Poured Concrete deck installed, shows the height of the side rail Start of the scale house construction

Install complete Scale with complete 8’x8’ scale house Scale house contains all electronics, is fully insulated, vinyl sided, has a locking door, window for air, separate electrical for scale.