Mitsubishi Electric – GT15 – FTP connection, July 2007 HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 GOT GT15 FTP connection Settings for FTP (file transfer protocol)

Mitsubishi Electric – GT15 – FTP connection, July 2007 HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 GOT GT15 FTP connection What do you need an FTP server functionality on the GT15 models for? –Direct check/edit of data in CF card –Files in the CF card within the GOT (e.g. alarms, recipes, and hard copies) can be directly read and written from a personal computer. –No need to visit all factories to collect CF cards from all GOTs when there are multiple GOTs or when a GOT is located far away from the personal computer.

Mitsubishi Electric – GT15 – FTP connection, July 2007 HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 GOT GT15 FTP connection Required hardware: –Any GT15 model –Ethernet module GT15-J71E –CF card Required software: –GT Designer 2 V2.59M –FTP client FFFTP

Mitsubishi Electric – GT15 – FTP connection, July 2007 HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 GOT GT15 FTP connection Actions required in GT Designer –Install Option O/S for FTP

Mitsubishi Electric – GT15 – FTP connection, July 2007 HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 Installation of FFFTP-client Install the software Start the self extracting archive (Software is embedded in this presentation)

Mitsubishi Electric – GT15 – FTP connection, July 2007 HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 Settings in FFFTP-client 1. Start file „ffftp“ 2. Enter a new host with the IP address of the GOT

Mitsubishi Electric – GT15 – FTP connection, July 2007 HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 Host setting (General) 1. Enter a profil ename, i.e. „GOT“ 2. Enter the IP address of the GOT 3. Enter the user name like defined in the GT-Designer project (Login Name) 4. Enter the password like defined in the GT- Designer project (Password)

Mitsubishi Electric – GT15 – FTP connection, July 2007 HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 Host Setting (Advanced) 1. Enter the command „gtwr“ to put the GOT in „write“-mode 2. Press „OK“ Without “gtwr”, files could only be uploaded from GOT1000 to PC! Safety measure

Mitsubishi Electric – GT15 – FTP connection, July 2007 HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 /// HMI /// GOT1000 Connection 1. Press „Connect“ 2. Select „Binary Mode“