The Hokie Load Releasing Hitch

Slides:

Advertisements

Similar presentations

N.C. TECHNICAL RESCUER; GENERAL; LOWERS & RAISES.

Advertisements

The 3 Configurations of Rope Rescue Systems

3:1 “Z” System 100% efficient pulleys Instructions on how to perform a “T Analysis” 1) Draw out your system 2) Start by applying T=1 where you would haul/pull.

Place nozzle on hose and fold over about 4 to 6 inches past each end of pack. High-rise Pack Loading.

Knot Master Program.  Scouts can progress through the required knots, hitches, bends and lashings with a fun advancement program.  There are also decorative.

Ropes and Knots Skill Drills.

Basic Knots. Overhand Knot PROCEDUCE 1. Form an overhand loop and insert one end of the rope into the loop. Then tighten up the knot Uses  To stop the.

Low Angle Rope Rescue Course Outline Knots & Hitches Required for set up…. Double Fisherman's (prusik loops) – slide 2 Water knot (webbing basket hitch)

Mod 5: Technical Skills I

Preparing a Launch Release Device. Gather the required parts 1 – Appropriate sized balloon 1 – Burner coil 1 – Spool 1 – String with small loop on one.

Lashing.  A means of fastening two poles (or spars) together Qualities of a Good Lashing  Firmness – it should be string and tight, or else it is likely.

PCSO MRT Training Guidelines 1. Overview  Rappelling  Safety Review  Rappel Commands  Munter Hitch  Rescue-8  Pass the knot  Change Over 2.

The Mariners Load Releasing Hitch

How to Sew a Button Step by Step Instructions. Thread the Needle If you like, you can double the thread to make this job quicker. Simply pull it through.

Prusik Cord Knots Prusik Loop – Double Fisherman ’ s Triple Wrap Prusik – onto a rescue line Rope Knots Bowline – Long tail Butterfly Knot Clove Hitch.

Hauling Systems. What Is a Hauling System? Combination of ropes and hardware assembled to form a mechanical advantage used to move a load from one point.

ROPE WORK. 2 Terminology A.The end, or working end, is the part of the rope in which the knot is tied. The unused portion is called the standing part.

Firefighter III Module C Ropes.

Rappelling Techniques ALERT Cadet Alpha 3 rd California Jason Kim March

1KNOTS.ppt Last Revised: 16 July 2002 Knots and Ropes Developed as part of the National Emergency Services Curriculum Project.

Knot Master Program Troop 509 Ham Lake, MN.

Cut strips of regular copy paper lengthwise, so that they’re 1/2 inch by 11 inches. Then the first step in folding is to create a small loop at one end.

Structures Packaging – Forms of Loading. Tension A force that pulls on a structure trying to make it longer. Example – hold the hand of another person,

A is used in climbing and caving where rope strains are light to moderate and for decorative purposes. The double figure eight is used to put a loop in.

Knots, Harnesses, Belaying and the 6 point Check

Tujuh Bukit Project Indonesia Field Response Team Knots

SAC Anchors II lecture Chris McGuinness 11/08/06 (Original slides by Clint Cummins, modified by Chris McGuinness)

Job Performance Requirement Tying a Figure Eight on a Bight.

Ropes and Knots Skill Drills.

APP-6,7 Apprentice Marlinspike / Boat Handling Instructors: George Crowl.

How to Sew a Button Step by Step Instructions. Thread the Needle For buttons, you should double the thread to make the job quicker. Pull it through the.

2 cos ( ) θ lbs 0° 100 lbs 200 lbs 90° 141 lbs 200 lbs 120° 200 lbs 200 lbs 45° 108 lbs 150° 200 lbs 386 lbs t = L L = load suspended from the anchors.

STEP BY STEP INSTRUCTIONS Basic Hand Sewing. Thread the Needle If you like, you can double the thread to make this job quicker. Simply pull it through.

1) Roll up the puttees. Start the roll by rolling the cotton tape, gradually towards the wool strip and roll that up as well. Roll the puttees up in so.

Group Activity: Suspension Bridge Model

By: Elijah Johnson Period: Materials Needed  2 Shoes  Shoelaces  Your Hands.

CLIMBING. EQUIPMENT Climbing shoes Climbing harness Climbing ropes.

Section 3 Constructing Raising/Lowering Systems b Anchoring Systems b Limited only by the: b Situation b Equipment Available b Knowledge of the RESCUER.

Other Knots. Double Carrick BendBowline On A Bight Double Carrick Bend, Bowline On A Bight.

How to Tie a Tie Mr. Loscos Sylmar High School BTE Academy.

Viewgraph 1 Exposed Wound. Viewgraph 2 Grasp Dressing.

Tying a Diamond on a Bight, with Double Grapevine balls on the ends.

How to Tie Your Shoes! By: Shawn and Joelle. Step 1: Take one lace in each hand and make an X. Draw the top lace through the bottom of the X and pull.

HOW TO WEAR SIMPLE TIE Choose the Half Windsor as an alternative to the Four-in-Hand method of tying a tie STEP 2 Place the tie around your neck with the.

Presentation created by T. Trimpe Presentation was developed for use with DNA Jewelry lesson at

Hauling Systems.

How to tie a tie. How to tie a tie Did you know…? The Eldredge Knot The Trinity knot The Rose knot The Ellie knot The Truelove knot The Merovingian.

Sewing Basics: How to Sew on a Button

Construction of Rigging Systems Refresher

Survival Knots.

Hamstring Graft Preparation Using a Modified Rolling Hitch Technique

Job Performance Requirement 15-10

High-rise Pack Loading

9 Ropes and Knots.

Job Performance Requirement 15-13

Step by Step Instructions

Job Performance Requirement 15-21

Job Performance Requirement 15-9

Step by Step Instructions

Job Performance Requirement 15-4

Knots and Ropes.

Job Performance Requirement 15-8

Sewing Basics: How to Sew on a Button

Step by Step Instructions

CSK015 Knotting Crib Cards – Print 10 x 15 cm Laminated

Presentation transcript:

The Hokie Load Releasing Hitch

Required Materials 32’ 8mm Dynamic Prusik Cord Extra Large Delta or Pear shaped carabiner Large Delta or large carabiner Dissimilar Carabiner

Place a large delta in a bight made in the cord then place a Munter knot in the extra large delta

Pull hitch together

Pull deltas 6”-8” apart and allow munter to roll over delta

Cross tail ends in large delta so that each end is on the opposite side of the delta

Close deltas and wrap tails at least 5 wraps

Pass a bight (both cords) through DO NOT pull ends through

Daisy chain tails together and tie cord ends together with a double fisherman knot

Place dissimilar carabiner through 3 loops

Clip dissimilar carabiner into extra large delta

To use in a system - place extra large delta toward anchor

And large delta towards the load

Remember – Clip, Munter, Cross

Extra large delta points toward anchor XL Delta

Operation: Hold tension and unwind wraps, Munter will allow for gradual transfer of load