1 ELECTRICAL TECHNOLOGY EET 103/4  Define and explain sine wave, frequency, amplitude, phase angle, complex number  Define, analyze and calculate impedance,

Slides:



Advertisements
Similar presentations
Complex Numbers in Engineering (Chapter 5 of Rattan/Klingbeil text)
Advertisements

Complex Numbers for AC Circuits Topics Covered in Chapter : Positive and Negative Numbers 24-2: The j Operator 24-3: Definition of a Complex Number.
Chapter 2: Part 1 Phasors and Complex Numbers
The Basic Elements and Phasors
1 Electrical Engineering BA (B), Analog Electronics, Lecture 2 ET065G 6 Credits ET064G 7.5 Credits Muhammad Amir Yousaf.
Chapter 3 Vectors.
Department of Electronic Engineering BASIC ELECTRONIC ENGINEERING Steady-State Sinusoidal Analysis.
1 ELECTRICAL TECHNOLOGY EET 103/4  Define and explain sine wave, frequency, amplitude, phase angle, complex number  Define, analyze and calculate impedance,
Phasors ET 242 Circuit Analysis II Electrical and Telecommunication
Steady-State Sinusoidal Analysis
1 Sinusoidal Functions, Complex Numbers, and Phasors Discussion D14.2 Sections 4-2, 4-3 Appendix A.
R,L, and C Elements and the Impedance Concept
Lecture 16 AC Circuit Analysis (1) Hung-yi Lee. Textbook Chapter 6.1.
Lesson 18 Phasors & Complex Numbers in AC
ELECTRIC CIRCUIT ANALYSIS - I
ELECTRIC CIRCUIT ANALYSIS - I
ES250: Electrical Science
Average Power and Power Factor ET 242 Circuit Analysis II Electrical and Telecommunication Engineering Technology Professor Jang.
Kent Bertilsson Muhammad Amir Yousaf. DC and AC Circuit analysis  Circuit analysis is the process of finding the voltages across, and the currents through,
Chapter 14 – The Basic Elements and Phasors
Chapter 5 Steady-State Sinusoidal Analysis. 1. Identify the frequency, angular frequency, peak value, rms value, and phase of a sinusoidal signal. 2.
Complex Numbers, Sinusoidal Sources & Phasors ELEC 308 Elements of Electrical Engineering Dr. Ron Hayne Images Courtesy of Allan Hambley and Prentice-Hall.
Fundamentals of Electric Circuits Chapter 9
Sinusoids & Phasors. A sinusoidal current is usually referred to as alternating current (ac). Circuits driven by sinusoidal current or voltage sources.
Chapter 15 – Series & Parallel ac Circuits Lecture 19 by Moeen Ghiyas 11/10/
Chapter 3 Vectors. Coordinate Systems Used to describe the position of a point in space Coordinate system consists of a fixed reference point called the.
Fall 2000EE201Phasors and Steady-State AC1 Phasors A concept of phasors, or rotating vectors, is used to find the AC steady-state response of linear circuits.
The V  I Relationship for a Resistor Let the current through the resistor be a sinusoidal given as Is also sinusoidal with amplitude amplitudeAnd.
Fundamentals of Electric Circuits Chapter 9 Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
Copyright ©2011 by Pearson Education, Inc. publishing as Pearson [imprint] Introductory Circuit Analysis, 12/e Boylestad Chapter 14 The Basic Elements.
1 ET 201 ~ ELECTRICAL CIRCUITS COMPLEX NUMBER SYSTEM  Define and explain complex number  Rectangular form  Polar form  Mathematical operations (CHAPTER.
Phasor Diagrams and Phasor Algebra Md Shahabul Alam Dept. of EEE.
1 ELECTRICAL CIRCUIT ET 201  Define and explain phasors, time and phasor domain, phasor diagram.  Analyze circuit by using phasors and complex numbers.
Fundamentals of Electric Circuits Chapter 9
1 ELECTRICAL TECHNOLOGY ET 201  Define series impedances and analyze series AC circuits using circuit techniques.
1 ECE 3336 Introduction to Circuits & Electronics Note Set #8 Phasors Spring 2013 TUE&TH 5:30-7:00 pm Dr. Wanda Wosik.
Phasors A phasor is a complex number that represents the magnitude and phase of a sinusoid:
1 ELECTRICAL TECHNOLOGY EET 103/4  Define and explain sine wave, frequency, amplitude, phase angle, complex number  Define, analyze and calculate impedance,
Unit 8 Phasors.
ELECTRICAL TECHNOLOGY EET 103/4
Chapter 3 Vectors. Vector quantities  Physical quantities that have both numerical and directional properties Mathematical operations of vectors in this.
Chapter 14 – Basic Elements and Phasors Lecture 17 by Moeen Ghiyas 13/12/
Circuit Theorems ELEC 202 Electric Circuit Analysis II.
ELE 102/102Dept of E&E MIT Manipal Phasor Versus Vector: Phasor – defined with respect to time. Vector – defined with respect to space A phasor is a graphical.
Applied Circuit Analysis Chapter 12 Phasors and Impedance Copyright © 2013 The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
COMPLEX NUMBERS and PHASORS. OBJECTIVES  Use a phasor to represent a sine wave.  Illustrate phase relationships of waveforms using phasors.  Explain.
Lecture 6 (II) COMPLEX NUMBERS and PHASORS. OBJECTIVES A.Use a phasor to represent a sine wave. B.Illustrate phase relationships of waveforms using phasors.
Chapter 15 Principles of Electric Circuits, Conventional Flow, 9 th ed. Floyd © 2010 Pearson Higher Education, Upper Saddle River, NJ All Rights.
Chapter 13 The Basic Elements and Phasors. Objectives Be able to add and subtract sinusoidal voltages or currents Use phasor format to add and subtract.
1 AC Circuit Theory. 2 Sinusoidal AC Voltage Waveform: The path traced by a quantity, such as voltage, plotted as a function of some variable such as.
Chapter 3 Vectors. Vector quantities  Physical quantities that have both numerical and directional properties Mathematical operations of vectors in this.
1 EENG224 Chapter 9 Complex Numbers and Phasors Huseyin Bilgekul EENG224 Circuit Theory II Department of Electrical and Electronic Engineering Eastern.
Chapter 13 The Basic Elements and Phasors. Objectives Be able to add and subtract sinusoidal voltages or currents Use phasor format to add and subtract.
EE301 Phasors, Complex Numbers, And Impedance. Learning Objectives Define a phasor and use phasors to represent sinusoidal voltages and currents Determine.
12.1 Introduction This chapter will cover alternating current.
ELECTRICAL TECHNOLOGY EET 103/4
Sinusoidal Excitation of Circuits
Lesson 1: Phasors and Complex Arithmetic
Chapter 9 Complex Numbers and Phasors
COMPLEX NUMBERS and PHASORS
Chapter 6 Sinusoids and Phasors
Week 11 Force Response of a Sinusoidal Input and Phasor Concept
ECE 1270: Introduction to Electric Circuits
2. 2 The V-I Relationship for a Resistor Let the current through the resistor be a sinusoidal given as Is also sinusoidal with amplitude amplitude.
Chapter 15.
Chapter 9 – Sinusoids and Phasors
C H A P T E R 12 Complex Numbers.
Chapter 9 – Sinusoids and Phasors
INC 111 Basic Circuit Analysis
Presentation transcript:

1 ELECTRICAL TECHNOLOGY EET 103/4  Define and explain sine wave, frequency, amplitude, phase angle, complex number  Define, analyze and calculate impedance, inductance, phase shifting  Explain and calculate active power, reactive power, power factor  Define, explain, and analyze Ohm’s law, KCL, KVL, Source Transformation, Thevenin theorem.

2 (CHAPTER 14) BASIC ELEMENTS AND PHASORS

Complex Numbers  How do we determine the algebraic sum of two or more voltages (or currents) that are varying sinusoidally.  One solution would be to find the algebraic sum on a point-to-point basis–but this would be a long and tedious process in which accuracy would be directly related to the scale employed.  A second solution is to use the complex numbers system to find the algebraic sum of sinusoidal waveforms.

Complex Numbers A complex number represents a point in a two- dimensional plane located with reference to two distinct axes. This point can also determine a radius vector drawn from the origin to the point. The horizontal axis is called the real axis, while the vertical axis is called the imaginary ( j ) axis.

Rectangular Form  The format for the rectangular form is  The letter C was chosen from the word complex.  The bold face (C) notation is for any number with magnitude and direction.  The italic notation is for magnitude only.

Rectangular Form Example 14.13(a) Sketch the complex number C = 3 + j4 in the complex plane Solution

Rectangular Form Example 14.13(b) Sketch the complex number C = 0 – j6 in the complex plane Solution

Rectangular Form Example 14.13(c) Sketch the complex number C = -10 – j20 in the complex plane Solution

Polar Form  The format for the polar form is:  Where Z indicates magnitude only and  is always measured counterclockwise (CCW) from the positive real axis.  Angles measured in the clockwise direction from the positive real axis must have a negative sign associated with them.

Polar Form

Polar Form Example 14.14(a)

Polar Form Example 14.14(b)

Polar Form Example 14.14(c)

Conversion Between Forms The two forms, rectangular and polar, are related by the following equations: – Rectangular to Polar

Conversion Between Forms Polar to Rectangular

Conversion Between Forms Example Convert C = 4 + j4 to polar form Solution

Conversion Between Forms Example Convert C = 10  45  to rectangular form Solution

Conversion Between Forms Example Convert C = -6 + j3 to polar form Solution

Conversion Between Forms Example Convert C = 10  230  to rectangular form Solution

Mathematical Operations with Complex Numbers  Complex numbers lend themselves readily to the basic mathematical operations of addition, subtraction, multiplication, and division  A few basic rules and definitions must be understood before considering these operations:

Mathematical Operations with Complex Numbers  Complex Conjugate  The conjugate or complex conjugate of a complex number can be found by simply changing the sign of the imaginary part in the rectangular form or by using the negative of the angle of the polar form

Mathematical Operations with Complex Numbers  Complex Conjugate  In rectangular form, the conjugate of: C = 2 + j3 is 2 – j3

Mathematical Operations with Complex Numbers  Complex Conjugate  In polar form, the conjugate of: C = 2  30 is 2  30

Mathematical Operations with Complex Numbers  Reciprocal  The reciprocal of a complex number is 1 divided by the complex number  In rectangular form, the reciprocal of: is  In polar form, the reciprocal of: is

Mathematical Operations with Complex Numbers  Addition  To add two or more complex numbers, simply add the real and imaginary parts separately.

Mathematical Operations with Complex Numbers Example 14.19(a) Find C 1 + C 2. Solution

Mathematical Operations with Complex Numbers Example 14.19(b) Find C 1 + C 2 Solution

Mathematical Operations with Complex Numbers  Subtraction  In subtraction, the real and imaginary parts are again considered separately.

Mathematical Operations with Complex Numbers NOTE Addition or subtraction cannot be performed in polar form unless the complex numbers have the same angle ө or unless they differ only by multiples of 180°

Mathematical Operations with Complex Numbers Example 14.20(a) Find C 1 - C 2 Solution

Mathematical Operations with Complex Numbers Example 14.20(b) Find C 1 - C 2 Solution

Mathematical Operations with Complex Numbers Example 14.21(a)

Mathematical Operations with Complex Numbers Example 14.21(b)

Mathematical Operations with Complex Numbers  Multiplication  To multiply two complex numbers in rectangular form, multiply the real and imaginary parts of one in turn by the real and imaginary parts of the other.  In rectangular form:  In polar form:

Mathematical Operations with Complex Numbers Example 14.22(a) Find C 1  C 2. Solution

Mathematical Operations with Complex Numbers Example 14.22(b) Find C 1  C 2. Solution

Mathematical Operations with Complex Numbers Example 14.23(a) Find C 1  C 2. Solution

Mathematical Operations with Complex Numbers Example 14.23(b) Find C 1  C 2. Solution

Mathematical Operations with Complex Numbers  Division  To divide two complex numbers in rectangular form, multiply the numerator and denominator by the conjugate of the denominator and the resulting real and imaginary parts collected  In rectangular form:  In polar form:

Mathematical Operations with Complex Numbers Example 14.24(a) Find Solution

Mathematical Operations with Complex Numbers Example 14.24(b) Find Solution

Mathematical Operations with Complex Numbers Example 14.25(a) Find Solution

Mathematical Operations with Complex Numbers Example 14.25(b) Find Solution

Phasors  The addition of sinusoidal voltages and currents will frequently be required in the analysis of ac circuits.

Phasors  One lengthy but valid method of performing this operation is to place both sinusoidal waveforms on the same set of axes and add algebraically the magnitudes of each at every point along the abscissa.  Long and tedious process with limited accuracy.

Phasors  A shorter method uses the rotating radius vector.  The radius vector, having a constant magnitude (length) with one end fixed at the origin, is called a phasor when applied to electric circuits.

Phasors  Phasors algebra is for sinusoidal quantities and is applicable only for waveforms having the same frequency.

Phasors

49 Adding two sinusoidal currents with phase angles other than 90° Phasors

Phasors Conversion of time domain to phasor domain The time domain is converted to the phasor domain as follows; TIME DOMAIN PHASOR DOMAIN

Phasors Conversion of time domain to phasor domain TIME DOMAIN PHASOR DOMAIN

Phasors Conversion of time domain to phasor domain TIME DOMAIN PHASOR DOMAIN

Phasors Conversion of time domain to phasor domain TIME DOMAIN PHASOR DOMAIN

Phasors Example 14.27(a) Convert the time domain to the phasor domain Solution TIME DOMAINPHASOR DOMAIN

Phasors Example 14.27(b) Convert the time domain to the phasor domain Solution TIME DOMAINPHASOR DOMAIN

Phasors Example 14.27(c) Convert the time domain to the phasor domain Solution TIME DOMAINPHASOR DOMAIN

Phasors Example 14.28(a) Convert the phasor domain to the time domain if the frequency is 60 Hz Solution TIME DOMAINPHASOR DOMAIN

Phasors Example 14.28(b) Convert the phasor domain to the time domain if the frequency is 60 Hz Solution TIME DOMAINPHASOR DOMAIN

Phasors Example Find e in

Phasors Example – solution Transforming v a and v b into the phasor domain; (KVL)

Phasors Example – solution (cont’d) Converting from polar to rectangular form;

Phasors Adding; Example – solution (cont’d)

Phasors Inverse-transforming to time domain; Example – solution (cont’d) Phasor domain: Time domain:

Phasors Phasor diagram; Example – solution (cont’d)

Phasors Time domain representation; Example – solution (cont’d)

Phasors Example Determine i 2 in the following network;

Phasors Example – solution In phasor form; Or;

Phasors Example – solution (cont’d) Transforming into phasor; and

Phasors Example – solution (cont’d) Converting into rectangular form; and

Phasors Example – solution (cont’d) Converting into polar form;

Phasors Example – solution (cont’d) Inverse-transforming into time domain;

Phasors Example – solution (cont’d) The time domain representation;

Phasors Example – solution (cont’d) Phasor representation;