By : Anand Kochhar Video Conferencing

End User Training on Tandberg-990MXP By Anand Kochhar Mobile: Video

Tandberg 990 at a Glance

Back Plane

Back Plane Interface

Remote Control Details

General Use

Navigation Key

Making a Call

Making a Audio/Video Call

Adding Multisite

Answer the Call

End the Call

Directory

Moving Camera

PIP & POP

On Screen Indicators

Control Panel

User Guide In-Build

Hands On Session Place a point to point call 2.Control the camera (pan/tilt/zoom) 3.Control the far end camera 4.Turn the microphone on and off 5.Disconnect the call 6.Call a system listed in the ‘directory’

Remote Control Features To make a call To disconnect a call To bring up directory Directional keys to move camera and for menu scrolling Menu/OK button Presentation button: PC, DVD, Aux cam etc Layout button

Moving the Camera The zoom button allows you to zoom in and out on people or objects The directional arrows will allow you to move the camera. If you are in menu mode, they will allow you to scroll through the menu Use this to adjust volume from speakers

Various Buttons  Microphone on/off button. When your mic is off, you will see an icon on the screen:  Selfview button is used to see what image you are sending to the far side  The telephone key pad, similarly to a mobile phone, is used to dial numbers  Microphone on/off button. When your mic is off, you will see an icon on the screen:  Selfview button is used to see what image you are sending to the far side  The telephone key pad, similarly to a mobile phone, is used to dial numbers

Making a Call

Accessing the Directory Use the arrow keys and keypad to add, delete or edit directories

Changing the Screen Layout  Press the layout button several times to scroll through various layouts seen above

Presentations  Easy access to presentations. This key is programmable to any external source. As default, it is set to PC  To activate other video sources, press menu, then presentations

Far End Control Far end camera gives you the ability to access the remote camera and video sources Step 1 Step 2

Storing Presets To set a preset:  Make sure you have no menus up  Move camera to desired position  Store position by pressing any of the numbers 0-9 for about 2 seconds  N.B Presets don’t only have to be for the camera. They can be used to access peripheral devices

Accessing Presets When in a call, press any of the numbers 0-9 depending on which preset you wish to access

Q & A Anand Kochhar HCL Infinet Ltd. Noida.