Kerr Pulp Canal Sealer EWT for Lubrication 1. Double check for dryness to working length with sterile absorbent point. 2. Place to terminus with absorbent point. 3. Remove with absorbent point(s) until slightly “splotchy” (Splotchy Paper Point Test). pre-warmedGP 4. Now ready to inject pre-warmed GP.

Applying Kerr Pulp Canal Sealer EWT

“Splotchy” Paper Point Test

Tips on Use: only 20 gauge needles  Use only larger 20 gauge needles 201 highest temp setting  Set at highest temp setting Schwedregular flow  Use Schwed regular flow Gutta Percha

Schwed “Regular Flow” pellets

The “SQUIRT”- Feel the pushback

Tips for packing GP: no binding  Preset plugger so no binding #9 Schilder  Use #9 Schilder plugger, or Dovgan #60 NiTi Blue Dovgan #60 NiTi 5 second  5 second “push”  Don’t “bounce” off GP wad of GP  Keep wad of GP ahead plugger clean  Make sure plugger clean enough pressure  Use enough pressure!

“PACK” The “PACK”