© 2010 MAiSPACE, Inc. ALUR Dividing Wall An Attractive, Cost Effective Sidewall for ALUR Glass Walls and MAiSPACE Floor to Ceiling Panels

© 2010 MAiSPACE, Inc. Component Parts Floor and Ceiling Track Vertical Stud Stud Spacer Panel Clip Panel Accessory Trim

© 2010 MAiSPACE, Inc. Key Features 5” Thick Walls Provide Outstanding Acoustics (STC 44) Minimal Kit of Parts and “Snap Fit” Connections Only 1 Hour per 4 Feet Install Time Removable Panels Allow Easy Access to Power & Cabling Tight Fitting Panel to Panel Reveal Can be Blocked to Accommodate Hang-on Components Accommodates Medical Gas Lines and Plumbing

© 2010 MAiSPACE, Inc. Step 1: Install Floor & Ceiling Track Install Floor and Ceiling Track: –Universal Floor and Ceiling Track –Track Follows the Level of Floor and Ceiling –No Need to Float Floor as Required for Unitized Systems

© 2010 MAiSPACE, Inc. Step 2: Install Stud Extender Install Stud Extender In Vertical Stud: –No Tools Required

© 2010 MAiSPACE, Inc. Step 3: Snap into Floor Track Install Stud Extender into Floor and Ceiling Track: –Built-in Stop Provides Pathway for Modular Power

© 2010 MAiSPACE, Inc. Step 4: Install Stud Spacer Install Stud Spacer in Vertical Stud: –Spaces Studs and Provides Pathway for Cables Note: Install Optional Green Wool Insulation.

© 2010 MAiSPACE, Inc. Step 5: Install Panel Clip Install Panel Clip into Side of Panel with Panels Laying on Floor –Easily removable

© 2010 MAiSPACE, Inc. Step 7: Install Panels on Studs Lift Panels and Snap into Studs –Self Aligning

© 2010 MAiSPACE, Inc. Step 6: Install Accessory Trim Install Accessory Trim on Floor & Ceiling Track and Studs at Wall Start

© 2010 MAiSPACE, Inc. Optional Marker Board One Piece Ceramic Marker Board