ASIC R&D at Fermilab R. Yarema October 30, 2003

Long Range Planning Committee2 ASICs are Critical to Most Detector Systems SVX4 – CDF & DO VLPC readout - DO Pixel readout - BTEV Silicon strip readout - BTEVPMT & HPD - CMSControl ASIC - CMS

October 30, 2003Long Range Planning Committee3 Detector and ASIC Development Detector R&D often begins first without a clear idea of how to read out the detector. –“What kind of chip do you have that might be used to readout signals from a ……. detector??” ASIC R&D usually begins later –Virtually every progress review involving a chip says that not enough time is allotted for ASIC development Chip demands keep increasing Specifications keep changing Processes keep changing Development starts too late –An ASIC is frequently on the critical path Detector and ASIC development need to proceed in parallel.

October 30, 2003Long Range Planning Committee4 New ASIC efforts at Fermilab Charge Digitizer (QIE) for BTEV PMTs –For PMT readout (negative current input) –Desire 0.15% resolution, dynamic range of 65,000:1 –Auto ranging current splitter with precision integrators and embedded ADC –Device planned to have 8 binary weighted ranges and an 8 bit FADC –132 ns clock –Pipelined operation with latency of 3 or 4 clock cycles –Controlled impedance input for cable termination (50 ohms) –Design in early stages –Submission targeted for early ’04 in AMS 0.8u BiCMOS

October 30, 2003Long Range Planning Committee5 TDC for BTEV –Multi-channel TDC, 8 or 16 channels –1 nsec resolution –Data scarification (read only hit channels) –132 nsec beam crossing –Include various miscellaneous functions –Radiation tolerant design (TID, SEU) in 0.25 µ Resonant Mode Converter Chip (RMCC) –Useful for LC detector R&D, BTEV, Off-axis neutrinos, etc –Integrated Cockcroft-Walton based voltage control chip with internal reference, DAC, ADC and op amps. –Serial programming interface with 12 bit DAC. –12 bit ADC for voltage and temperature read back. –Polarity programmable with pin selection. – V –Up to 5KV possible, higher with special drive circuit –Low ripple –Provides relatively inexpensive single channel voltage control and read back for high voltage applications.

October 30, 2003Long Range Planning Committee6 Future ASIC R&D Projects Very Deep Submicron CMOS technology (0.13 to 0.09 µm) –In the last 12 years, designs have moved from 3.0 µ to 0.25 µ feature sizes. (SVX => SVX2 => SVX3 => SVX4) –Move to smaller feature sizes will inevitably occur. Processes will become obsolete Need for higher resolution detectors –Move offers challenges Lower voltage range, less analog voltage range Different approach to radiation hardness, new libraries Cost management, masks are extremely expensive ($500K/set) International collaborations for qualifying processes –Move requires substantial effort and time- start soon.

October 30, 2003Long Range Planning Committee7 APD Readout Chip (readout chip for small signals) –Multiple channel (64?) readout device for applications like Neutrino Off-Axis Detector and LC Calorimeter R&D. –Must operate with low input signals (2000 e). –Have performed test with in-house designed chip (MASDA) for amorphous silicon detectors, which shows low noise operation is possible. –APDs are cooled to –40°C to reduce dark current. –New design to be optimized for APDs with minimum S/N=10.

October 30, 2003Long Range Planning Committee8 Readout Chip for RPCs and GEMs –Possible application in Linear Collider and Neutrino Off-Axis Detector. –Single chip with different front end amplifiers for different detectors. –Multi-channel device (8-32 channels, size mostly related to RPC layout). –One bit ADC –Timestamp each hit. –Store hits in local buffers, read out periodically. –Non-triggered system Read out timestamps and channel ID into trigger processor Use timestamps to construct hits Works well for low event rates and low noise rates

October 30, 2003Long Range Planning Committee9 Multi-channel Mini-strip Readout ASIC –Designed for silicon strip upgrades requiring higher luminosity such as SLHC and Phenix (work for others). Design for Cin = 0.2 – 1 pf (50 x um cells) High channel count, e.g. 512 ch/chip Relaxed bump bonding pitch –Challenges Chip power distribution Back side current connection for lower noise Cooling –Borrow from experience on SVX4 and FPIX2

October 30, 2003Long Range Planning Committee10 CCD and Monolithic Active Pixel Sensors (MAPS) –Alternate technologies for future detectors –ASIC for CCD projects like the Linear Collider 20 x 20 um cells Radiation concerns (~10 Krads) Mhz readout on 8-30 readout amplifiers/CCD Internal 8 bit FADC Cluster processing –MAPS hold great potential for HEP and space Combined detector and readout chip with ADCs Very small pixel cells (3 um x 3 um) Low mass (thin to 50 um) –MASDA Amorphous silicon detector with integrated transistors for medical imaging – low noise, high resolution, slow readout.

October 30, 2003Long Range Planning Committee11 ASIC Design Group Particle Physics Division –Electrical Engineering Department -70 Board level and other hardware design ASIC Design –ASIC designers - 5 »Full custom analog »Full custom mixed signal –Testing – group of 5 »Wafer and robotic testing of packaged parts »Radiation studies

October 30, 2003Long Range Planning Committee12 Summary ASICs have been and will continue to be critical to new detector development. ASIC development is costly in terms of tools and chip fabrication. ASIC R&D is needed to keep pace with new process features and design challenges. ASIC R&D needs to be adequately funded and proceed along with detector development