2D Machine Control Systems GCS500 for Graders

Station Content Guide the presenter of the sub-stations should cover the following content at the different machines (sub-stations) cover the points listed per machine (sub-station) and repeat constantly the points from the next slide show the configuration which we have installed and on display so that the customer understands the parts of the system show flexibility in terms of AccuGrade or GCS900 depending on what is installed on the machines (sub-stations)

Grade Control Systems GCS500 2D Machine Control Systems Flexible and interchangeable from machine to machine and machine type to machine type Supported from Control Box for 2D only or the CB430 (2D &3D) with one onboard software Full support of 2D functionality also on the CB430 Multilingual support Wide range of configurations in hard- and software fully ubgradeable to 3D Machine Control Systems Available for all machine manufacturer and also as factory fitted Trimble Ready pre-installation

Cross slope guidance

Cross slope guidance When using a cross slope guidance, the lightbars only give guidance to one blade tip and only the lightbar corresponding to that is active. The lightbar corresponding to the unguided blade tip is blank. The horizontal lightbar is blank.

Trimble GCS500: 2D Grader– Cross-slope CB420 CB430 LB400 AS400 RS400 or Harness Power Module PM400 Valve Module VM4X0

GCS500 for Graders - Benefits Provides a simple solution to many sloping applications Cross slope only 100% slope sensors Full rotation capability Upgradeable to elevation control Easy to learn and use Ideal for machines using multiple operators No grade checking anymore Reduction of costs Reduction of downtime Productivity enhancement Flexibility to grow and get upgraded

Trimble GCS500 Applications Designed for applications creating or maintaining slopes Road maintenance Sports fields Embankments Road ditches Road construction Highway construction