MATRIX series

MATRIX Design: Modern and innovative Solid structure and brilliant performance. Flexibility: all Matrix key cutting machines can duplicate Mercedes (*) 2 and 4 Track type key and Fichet (*) type keys as a standard feature without the need for special adaptors. (*) The trade-marks or trade names mentioned in our catalogue are the exclusive property of authorized manufactures of lock and users, they are nominated only for the purposes of information so that any lock for which our keys are made can be rapidly identified.

MATRIX Ergonomical working: this series key cutting machines offers easy handling with comfortable working position, perfect support to reach perfect results every time. Reliability: Roller bearings on all three models ensure no vibration while cutting Optimal stability High performance time after time.

MATRIX MATRIX SLX The ultimate in key cutting machines with the main features of S and SX models combined and in addition: two speed motor and self centering chucks giving this machine many outstanding features which allow you to duplicate laser and dimple cut keys (angle cuts to 45°) with speed, simplicity and absolute precision. (*) The trade-marks or trade names mentioned in our catalogue are the exclusive property of authorized manufactures of lock and users, they are nominated only for the purposes of information so that any lock for which our keys are made can be rapidly identified.

MATRIX MATRIX SX A top quality machine with the brilliant combination of smooth movement through roller bearings, electromechanical calibration and the added concept of tilting jaws, all standard features designed to give high performance with simplicity and accuracy when duplicating sidewinder or angle cut dimple keys.

MATRIX MATRIX S The winning combination of smooth movement through roller bearings, ergonomically designed levers and electromechanical calibration combined specifically for duplication of laser and dimple keys with precision and simplicity.

MATRIX KEYS DUPLICATED * Matrix SLX and SX only

MATRIX Models Comparison Tilting and interchangeable jaws Semi automatic cutting for laser key Spring loaded tracer point Electromechanical calibration Depth adjusting dial (0,02”) Self centering chucks Guard Light and protection Tools and accessories compartment Ergonomic handle and levers Interchangeable clamp face plates Single speed Double speed S • SX SLX 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 -

MATRIX 1 - Tilting jaws (SX - SLX) These interchangeable jaws are the best solution for cutting dimple keys with angled cuts as they can be tilted at any angle up to 45°.

MATRIX 2 - Semi automatic cutting (S - SX - SLX) When cutting sidewinder keys you can automatically apply a constant spring loaded pressure to the cutting edge of the key which requires you to only operate the forward and backward movement giving you an easier and more accurate cutting process and at the same time leaving one hand free.

MATRIX 3 - Spring loaded tracer point (SX - SLX) In one simple action the spring loading of the tracer point is activated by releasing the locking nut, allowing the tracer point to be located into the original key before lowering the cutter to the blank, making it easier to duplicate even the most difficult dimple keys.

MATRIX 4 - Electromechanical calibration (S - SX - SLX) Simple and precise calibration of the cutter and tracer by the use of an extremely quick and reliable electromechanical device with indicator lights to signal when the calibration is accurate.

MATRIX 5 - Depth adjusting dial (S - SX - SLX) The tracer point is adjusted by rotating a dial which is calibrated to lower or raise by 0,02 mm on each movement through a ratchet. An indispensable function when you are duplicating worn keys.

MATRIX 6 - Self centering chucks (SLX) Self centering chucks with hand operated locking device to elevate the use of tools, fastening the cutting operations.

MATRIX 7 - Guard (S - SX - SLX) A curved transparent plastic guard is fitted around the cutter to minimise the spread of metal chips when cutting. The guard can be moved around depending on keys being cut (i.e. angle position) and there’s no need to remove it when changing cutters.

MATRIX 8 - Light (S - SX - SLX) The light is built into the body of the machine behind the jaws giving excellent illumination of the working area. Protection All moving parts are covered by the machine body to protect them from dust and metal chips. Depending on the keys being cut (angle position) the guard can be moved and there’s no need to remove it when changing cutters.

MATRIX 9 - Tool compartment (S - SX - SLX) A hinged compartment built into the body of the machine to keep all the cutters, tracers and small adaptors safe and easily accessible.

MATRIX 10 - Handles and levers (S - SX - SLX) Ergonomically designed: handles and levers give comfortable and easy operation with the added feature of a finger rest.

MATRIX