1 MSE 110W WIRELESS SAFETY EDGE

2 WIRELESS SAFETY EDGE MSE 110W

3 The new wireless safety edge MSE 110W has been designed to comply every aspect, in terms of safety, of the Europeans Norms currently in charge. Allows you to make installations in compliance with: EN EN It is classified as safety device category 2 according to EN WIRELESS SAFETY EDGE MSE 110W

4 The MSE 110 W in not only a sensing device for the leaf edge, in fact integrates also an infrared photocell transmitter, that coupled with the receiver on the pillar, gives you an additional protection on the gate transit area (Device C+D EN 12453) All photocells TX or RX present inside the MSE110W are powered by batteries (lithium type AA, minimum life 2 years) The MSE110W doesn't’ require ANY WIRING. It definitely solves all wiring problems related with moving leaves. WIRELESS SAFETY EDGE MSE 110W

5 TX TX TX RX RX RX How it works WIRELESS SAFETY EDGE MSE 110W

6 Central element Incorporates 2 receivers, 1 infrared transmitter and lithium batteries. RX and TX circuit Batteries are easy accessible removing the screws of the cover. Cover WIRELESS SAFETY EDGE MSE 110W

7 Terminals elements At both MSE110W terminals you find batteries powered infrared transmitters. Per sostituire le batterie è sufficiente rimuovere il tappo, sfilare il gruppo TX e togliere il coperchio fissato con due viti Cover and closing screws OR Gasket Photocell lens WIRELESS SAFETY EDGE MSE 110W

8 Fixed Receiver Can be: Mounted on the wall/pillarMounted on the wall/pillar Mounted on a “Safebeam” columnMounted on a “Safebeam” column Incorporated inside a counter-rubber edge which receives the MSE110WIncorporated inside a counter-rubber edge which receives the MSE110W Mounted on a wall-support which permits angle adjustment.Mounted on a wall-support which permits angle adjustment. WIRELESS SAFETY EDGE MSE 110W

9 Fixed Receiver mounted on a safebeam column WIRELESS SAFETY EDGE MSE 110W

10 Fixed Receiver mounted on a counter-rubber edge WIRELESS SAFETY EDGE MSE 110W

11 Fixed Receiver mounted on adjustable wall support WIRELESS SAFETY EDGE MSE 110W

12 Fixed receiver applications – top views Wall/Pillar Counter-rubber edge Safebeam column Wall adjustable support WIRELESS SAFETY EDGE MSE 110W

13 The fixed receiver is the only element which require wiring It has front LEDs that allow you to monitor the status of the MSE 110 W, without accessing the control board. Battery charge is also displayed. Fixed Receiver WIRELESS SAFETY EDGE MSE 110W

14 Open-Stop-Close key protected industrial push- button XB300 Availability: January 2007

15 Control board housing with integrated key protected Open-Stop-Close push- button and main switch disconnector XB541 Availability: January 2007