Geometry 4 I.Hrivnacova IPN, Orsay Most slides thanks to M. Asai, SLAC Cours Paris June 2007

Cours Paris Contents Advanced ways of placement  Divisions  Assembly volumes  Reflected volumes Geometry optimization

Cours Paris Contents Advanced ways of placement Divisions Assembly volumes Reflected volumes Geometry optimization

Cours Paris Divisions G4PVDivision is a special kind of G4PVParameterised.  G4VPVParameterisation is automatically generated according to the parameters given in G4PVDivision. G4PVDivision is similar to G4PVReplica but  It currently allows gaps in between mother and daughter volumes  We are extending G4PVDivision to allow gaps between daughters, and also gaps on side walls. We plan to release this extension at version 9.0. Shape of all daughter volumes must be same shape as the mother volume.  G4VSolid (to be assigned to the daughter logical volume) must be the same type, but different object. Replication must be aligned along one axis. If your geometry does not have gaps, use G4Replica.  For identical geometry, navigation of G4Replica is faster. mother volume

Cours Paris G4PVDivision (1) G4PVDivision(const G4String& name, G4LogicalVolume* daughterLogical, G4LogicalVolume* motherLogical, const EAxis axis, const G4int nofDivisions, // number of division is given const G4double offset = 0.); The size (width) of the daughter volume is calculated as: ( (size of mother) - offset ) / nDivisions nDivisions offset

Cours Paris G4PVDivision (2) G4PVDivision(const G4String& name, G4LogicalVolume* daughterLogical, G4LogicalVolume* motherLogical, const EAxis axis, const G4int nofDivisions, const G4double width, // both number of division and width // are given const G4double offset = 0.); nofDivisions daughters of width thickness nDivisions offset width

Cours Paris G4PVDivision (3) G4PVDivision(const G4String& name, G4LogicalVolume* daughterLogical, G4LogicalVolume* motherLogical, const EAxis axis, const G4double width, // width of daughter volume is given const G4double offset = 0.); The number of daughter volumes is calculated as int( ( (size of mother) - offset ) / width ) As many daughters as width and offset allow nDivisions offset width

Cours Paris G4PVDivision Supported Cases (1) G4PVDivision currently supports following shapes / axes. CSG solids:  G4Box : kXAxis, kYAxis, kZAxis  G4Tubs : kRho, kPhi, kZAxis  G4Cons : kRho, kPhi, kZAxis  G4Trd : kXAxis, kYAxis, kZAxis  G4Para : kXAxis, kYAxis, kZAxis

Cours Paris Division Supported Cases (2) Specific solids:  G4Polycone : kRho, kPhi, kZAxis kZAxis - the number of divisions has to be the same as solid sections, (i.e. numZPlanes-1 ), the width will not be taken into account.  G4Polyhedra : kRho, kPhi, kZAxis kPhi - the number of divisions has to be the same as solid sides, (i.e. numSides ), the width will not be taken into account. kZAxis - the number of divisions has to be the same as solid sections, (i.e. numZPlanes-1 ), the width will not be taken into account. In the case of division along kRho of G4Cons, G4Polycone, G4Polyhedra, if width is provided, it is taken as the width at the -Z radius; the width at other radii will be scaled to this one.

Cours Paris Contents Advanced ways of placement Divisions Assembly volumes Reflected volumes Geometry optimization

Cours Paris Assembly Volumes Grouping Volumes To represent a regular pattern of positioned volumes, composing a more or less complex structure  Structures which are hard to describe with simple replicas or parameterised volumes  Structures which may consist of different shapes  Too densely positioned to utilize a mother volume Assembly volume  Acts as an envelope for its daughter volumes  Its role is over once its logical volume has been placed  Daughter physical volumes become independent copies in the final structure Participating daughter logical volumes are treated as triplets  Logical volume  Translation w.r.t. envelope  Rotation w.r.t. envelope

Cours Paris Assembly Volumes G4Assembly Volume Helper class to combine daughter logical volumes in arbitrary way G4AssemblyVolume::AddPlacedVolume ( G4LogicalVolume* volume, G4ThreeVector& translation, G4RotationMatrix* rotation );  Adds a volume in the assembly with a given placement G4AssemblyVolume::AddPlacedAssembly ( G4AssemblyVolume* volume, G4ThreeVector& translation, G4RotationMatrix* rotation );  The daughter of the assembly can be also an assembly of volumes

Cours Paris Assembly Volumes G4Assembly Volume Imprints of the assembly volume are made inside a mother logical volume through: G4AssemblyVolume::MakeImprint ( G4LogicalVolume* motherVolume, G4ThreeVector& translation, G4RotationMatrix* rotation );  Each physical volume name is generated automatically Format: av_WWW_impr_XXX_YYY_ZZZ  WWW – assembly volume instance number  XXX – assembly volume imprint number  YYY – name of the placed logical volume in the assembly  ZZZ – index of the associated logical volume  Generated physical volumes (and related transformations) are automatically managed (creation and destruction)

Cours Paris Assembly Volumes Example G4AssemblyVolume* assembly = new G4AssemblyVolume(); G4RotationMatrix rotation; G4ThreeVector position; position.setX(…); position.setY(…); position.setZ(…); assembly->AddPlacedVolume( plateLV, position, rotation); … // repeat placement for each daughter for ( unsigned int i = 0; i < layers; i++ ) { G4ThreeVector tm(…); G4RotationMatrix rm(…); assembly->MakeImprint( worldLV, tm, rm ); }

Cours Paris Contents Advanced ways of placement Divisions Assembly volumes Reflected volumes Geometry optimization

Cours Paris Reflected Volumes Reflecting Solids Let's take as an example a human hand  In a mirror the right hand becomes a left hand  But we cannot make a left hand from the right one by a simple 180 degree rotation or a translation The hand in a mirror is not the same 'solid' as the hand before

Cours Paris Reflected Volumes Reflecting Solids Hierarchies of volumes based on CSG or specific solids can be reflected by means of the reflection factory and reflected solid classes G4ReflectedSolid (derived from G4VSolid)  Utility class representing a solid shifted from its original reference frame to a new mirror symmetric one The right hand -> the left hand  Once the reflection (G4Reflect[X/Y/Z]3D) is applied to solid, the new solid can be placed with a transformation made by a translation and rotation only G4ReflectionFactory  Singleton object using G4ReflectedSolid for generating placements of reflected volumes Reflections are limited to simple CSG solids and specific solids

Cours Paris Reflected Volumes Reflection Factory When reflecting hierarchies of volume, the reflection factory creates for each solid and logical volume its reflected counterpart When placing a volume (or volume tree) in a geometry containing already reflected volumes, it is important to use constantly G4ReflectionFactory, as it guarantees that the placement will occur also in a reflected counterpart of the mother logical volume Reflection factory methods for placements:  G4PhysicalVolumesPair G4ReflectionFactory::Place (..);  G4PhysicalVolumesPair G4ReflectionFactory::Replicate (..);  G4PhysicalVolumesPair G4ReflectionFactory::Divide (..);  Reflection of generic parameterised volumes is not possible yet. All return a pair of physical volumes, the second being a placement in the reflected mother, if the mother volume has its reflected counterpart:  G4PhysicalVolumesPair is std::pair

Cours Paris Reflected Volumes Reflecting hierarchies of volumes (1) G4PhysicalVolumesPair G4ReflectionFactory::Place ( const G4Transform3D& transform3D, // the transformation const G4String& name, // the name G4LogicalVolume* LV, // the logical volume G4LogicalVolume* motherLV, // the mother volume G4bool noBool, // currently unused G4int copyNo // optional copy number ); Used for normal (simple) placements: 1) Performs the transformation decomposition 2) Generates a new reflected solid and logical volume, or retrieves it from a map if the reflected object is already created 3) Transforms all daughters and places them in the given mother 4) If motherLV has its reflected counterpart, create a second placement of this volume in the reflected mother

Cours Paris Reflected Volumes Reflecting hierarchies of volumes (2) For replicated volumes: G4PhysicalVolumesPair G4ReflectionFactory::Replicate ( const G4String& name, // the actual name G4LogicalVolume* LV, // the logical volume G4LogicalVolume* motherLV, // the mother volume Eaxis axis, // axis of replication G4int replicaNo, // number of replicas G4int width, // width of single replica G4int offset=0 // optional mother offset ); 1) Creates replicas in the given mother volume 2) If motherLV has its reflected counterpart, create a second placement of this volume in this reflected mother

Cours Paris Reflected Volumes Reflecting hierarchies of volumes (3) For divided volumes: First it is necessary to explicitly instantiate a concrete division factory -before- applying the actual reflection: G4PVDivisionFactory::GetInstance(); G4PhysicalVolumesPair G4ReflectionFactory::Divide ( const G4String& name, // the actual name G4LogicalVolume* LV, // the logical volume G4LogicalVolume* motherLV, // the mother volume Eaxis axis // axis of division G4int nofDivisions // number of division G4int width, // width of single division G4int offset=0 // optional mother offset 1) This creates division in the given mother volume 2) If motherLV has its reflected counterpart, create a second placement of this volume in this reflected mother

Cours Paris Contents Advanced ways of placement Divisions Assembly volumes Reflected volumes Geometry optimization

Cours Paris Geometry Optimisation Smart Voxelization In case of Geant 3.21, the user had to carefully implement his/her geometry to maximize the performance of geometrical navigation. While in Geant4, user’s geometry is automatically optimized to most suitable to the navigation. - "Voxelization"  For each mother volume, one-dimensional virtual division is performed.  Subdivisions (slices) containing same volumes are gathered into one.  Additional division again using second and/or third Cartesian axes, if needed. "Smart voxels" are computed at initialisation time  When the detector geometry is closed  Does not require large memory or computing resources  At tracking time, searching is done in a hierarchy of virtual divisions

Cours Paris Geometry Optimisation Detector description tuning Some geometry topologies may require ‘special’ tuning for ideal and efficient optimisation  for example: a dense nucleus of volumes included in very large mother volume Granularity of voxelization can be explicitly set to logical volume via  its method: SetSmartless(G4double); Critical regions for optimisation can be detected  Helper class G4SmartVoxelStat for monitoring time spent in detector geometry optimisation Automatically activated if /run/verbose greater than 1 Percent Memory Heads Nodes Pointers Total CPU Volume k Calorimeter k Layer

Cours Paris Geometry Optimisation Visualising voxel structure The computed voxel structure can be visualized with the final detector geometry  Helper class G4DrawVoxels  Visualize voxels given a logical volume G4DrawVoxels::DrawVoxels(const G4LogicalVolume*)  Allows setting of visualization attributes for voxels G4DrawVoxels::SetVoxelsVisAttributes(…)