Kirsch Basic Drapery Hardware

Architrac

What is Architrac? Drapery hardware track and component “systems” developed to meet nearly all specialty window needs. Kirsch pioneered and developed both the hardware systems and headings.

Applications Architrac can be used in any application both residential and commercial. Commercial applications within the hospitality industry are the most common and well known.

Hospitality Meeting Rooms Guestrooms

Healthcare

Residential

Heading Systems Pinch Pleats Most familiar of the heading systems. Most popular and our focus.

Heading Systems – Also Available Ripplefold Accordia Fold Cubicle Curtains

Architrac™ Collections Series 93001 Series 94001 Series 9046 Series 9600 Series 94003 Series 94004 Series 94005 Series 94008

Where Do You Begin? 6 Key Questions: What is my Drapery Heading? What is my Mount Location? What is my Control Type? Will be rod be Straight or Curved? What is my needed Rod Length? What is my Fabric Weight?

Drapery Heading Pinch Pleats Ripplefold Accordia Fold Cubicle Curtains

Mount Location Ceiling Mount Wall Mount Recessed Mount Suspended Mount

Control Type Cord Draw One Way or Two Way Draw available Double Channel Headrail Baton Draw (aka Hand Draw) Designed for hard use installations where misuse may damage draperies. Keeps hands off of the draperies Can be offered without Baton for “true” hand draw

Rod Profile Straight Curved

Rod Length One way draw maximum track lengths Two way draw maximum track lengths Up to 16 feet (192 inches): 93001, 9046, 94004, 94005, 94008 Up to 20 feet (240 inches): 94001, 9600, 94003 Up to 32 feet (384 inches): 93001, 9046, 94004, 94005, 94008 Up to 40 feet (480 inches): 94001, 9600, 94003

(One Way Draw / Two way Draw) Fabric Weight **Weight capacities listed in pounds (lbs.) of fabric per linear foot** (One Way Draw / Two way Draw) Series 93001 : 2 lbs. / 2 lbs. Series 94001 : 3.10 lbs. / 2 lbs. Series 93601 : 3 lbs. / 3.50 lbs. Series 9046 : 2 lbs. / 2 lbs. Series 9600 : 2.40 lbs. / 2.40 lbs. Series 94003 : 2 lbs. / 2 lbs. Series 94004 : 2 lbs. / 2 lbs. Series 94005 : 2 lbs. / 2 lbs. Series 94008 : 2 lbs. / 2 lbs.

Cord Draw Systems 93001 Low profile track system designed for headings that mount under track, i.e., Ripplefold, Accordiafold Front loading carrier system for easy installation 94001 Heaviest duty track in our collection Smaller % of usage

Baton Draw Systems 94003: More popular (works for either ceiling or wall mount), designed to accept all heading and master carriers 94004: Rear flange, can not use “over the top master”, can not be curved 94005: Designed to accept all heading and master carriers 94008: Rolled Steel (like Superfine), not Kirlon coated 9046: Cubicle System

Baton Draw Systems

Ordering Options Assembled Sets/CTM - Recommended Requires no additional assembly Contains appropriate brackets, master carriers, carriers and controls Priced as first 3 feet charge + charge for each additional foot Track Build - Available Each track, component and brackets specified on order Assembly and order completeness dealer’s responsibility

Selection Guide

Basic Drapery Hardware Traverse Rods Continental Rods Specialty Rods Curtain Rods Accessories

Superfine Traverse Rods Heavy-gauge steel Baked enamel finish 20% thicker Kirlon® stripe Master Carrier Drop-in, push-in brackets Center draw converts to one-way Long wearing, stretch-resistant polyester cord

Empire Traverse Rods Heavy-gauge steel Baked enamel finish Drop-in brackets Long wearing, stretch-resistant polyester cord

Continental® Curtain Rods (Wide Pocket) Continental® II: 2-1/2” with 3” rod pockets Continental® I: 4-1/2” with 5” rod pockets Multiple combinations Adjustable, fixed brackets

Specialty Rods Café Rods Spring Tension Rods Sash Rods Arch & Clear Rods

Curtain Rods Gold Seal Lockseam Super Kirco Single, Double and Triple Valance Rods Fixed projection

Accessories Café Rings Pin-On and Slip-in Hooks Shower Rings Rod Extenders Cord Repair Kits Brackets Supports Carriers

What are your questions?

Thank You!