INTRODUCTION TO SAFETY. WHAT IS SAFETY/LOSS PREVENTION? The prevention of accidents through the use of appropriate techniques OR technologies to identify.

Slides:

Advertisements

Similar presentations

Managing Risk: A Framework and Reporting Cycle 2014.

Advertisements

OSHA’s Voluntary Protection Program (VPP) Job Hazard Analysis Mishap reporting 1 This class is only intended to familiarize you with the programs in place.

Job Hazard Analysis. © Business & Legal Reports, Inc Session Objectives Identify the purpose of JHA Recognize the benefits of JHA Understand the.

Hazard Prevention Program

Please read this before using presentation This presentation is based on content presented at the Mines Safety Roadshow.

Chapter 7: Risk, Safety and Liability in Engineering

University of Minnesota Duluth Job Hazard Analysis Assessing Risk & Eliminating Hazards Prepared by: Mahjoub Labyad Environmental Health and Safety Office.

SE 465 INDUSTRIAL SAFETY SYLLABUS (062) Instructor Dr. Tahir Ayar.

University of Minnesota Duluth Introduction to Job Hazard Analysis Assessing Risk & Eliminating Hazards Prepared by: Mahjoub Labyad, MIS Environmental.

Control of Substances Hazardous to Health Regulations 2002 (COSHH)

NEBOSH Certificate Essentials

Safety and Health Programs

The most precious commodity in your organisation?

 A hazard is anything that can cause injury or loss.

PHILOSOPHY OF ACCIDENT PREVENTION

INTRODUCTION. Department Policy The Department of Environmental Protection recognizes that it has the obligation to provide for the health and safety.

Review Quiz 1. OHS Legislation 4. Incident Response Introduction 2. Hazards & Controls 3. OHS Communication EASY GUIDES Australia.

International Health and Safety at Work

Process Hazard Analysis DOW Fire & Explosion Index ChE 258 Chemical Process Safety University of Missouri - Rolla.

Environmental hazards What are the procedures in your workplace for managing environmental hazards? What is a hazard? How can hazards be managed?

INDUSTRIAL HYGIENE – METHODS OF CONTROL

Hazard Identification

Safety in the Workplace

Occupational Health and Safety

constructionsite Risk Assessment Procedures constructionsite Risk Assessment Procedures  Define the Work Activity  Understand the Work Method  Define.

TOOL BOX TALKS OHS Risk Management. Definitions Hazard – anything with the potential to cause harm to a person or damage to property Risk – the actual.

Introduction to Workplace Safety

Job Hazard Analysis. A job hazard analysis is a technique that focuses on job tasks as a way to identify hazards before they occur. It focuses on the.

DISCRIBTION OF SAFETY AND HEALTH WORK Competency : APPLYING OF SAFETY AND HEALTH WORK.

Westminster Kingsway College Professional Chef Diploma Unit 703 S.Greubel.

Ergonomics Regulatory Requirements Bawan Saravanabawan, Labour Program, HRSDC February 4, 2008.

Hazards Identification and Risk Assessment

Chapter 20 A Safe and Healthy Environment. Lecture Overview Employee Safety Principles of Safety Program Implementation of Safety Program Health Work.

Division of Risk Management State of Florida Loss Prevention Program.

Division of Risk Management State of Florida Loss Prevention Program.

Introduction to a Safe Workplace

Historical Perspective and Overview. Modern Safety & Health Teams  The modern safety and health team is headed by a safety and health manager.  These.

National Corporate Training Pty Ltd0. Topics Follow safe work practices Maintain personal safety standards Assess risks Follow emergency procedures National.

Engineering Ethics ELEC 422, Spring 2006 (kudos to Drs. Peeples and Jerse for portions of this presentation)

Principles of Information Technology Job Safety Skills Copyright © Texas Education Agency, 2012.

Safety and hazop study done by Sara ALSafi Safety and hazop study done by Sara ALSafi.

1 INDUSTRIAL SKILLS. OSHA OCCUPATIONAL SAFETY & HEALTH ADMINISTRATION

OHSAS Occupational health and safety management system.

TRIVIA Unit G20 Click for Question Which one of the following hazards is least likely to become a risk? A slippery surface or A box left in the stock.

LECTURE 7 AVIATION SAFETY & SECURITY

Warehousing and Storage Principles Session 10 – Personal Protective Equipment Day 5 / PM.

Process Safety Management Soft Skills Programme Nexus Alliance Ltd.

Work Place Committees and Health and Safety Representatives Training Module 5 – INPECTIONS, WORK PLACE HAZARDS, TASK HAZARD ANALYSIS.

Recognizing and controlling workplace hazards. Objective To explain a job hazard analysis and encourage employees to recognize and evaluate workplace.

HSE Procedure for Risk Assessment Document Number: KOC.SA.018

Campus Wide Safety Committee Initial Meeting 11/9/16

Occupational Health and Safety

NEBOSH Certificate Essentials

Hazard Identification and Control

BEST PRACTICES IN PROCESS SAFETY

Monitoring, Review and Audit of OHS&E

RISK ASSESSMENT “Risk management tool, for a safe workplace”

What is the importance of Health and Safety Training Courses? By E.H.S Emirates Foundation.

Introduction In the first lesson we demonstrated the following:-

Infection Prevention: A Hierarchy of Controls Approach

Risk Assessments for Camps and Excursions

سیستم مدیریت ایمنی، بهداشت و محیط زیست

MKKK 1653 SAFETY AND HEALTH IN CHEMICAL INDUSTRIES

Hazard Identification & HAZOP (HAZard and OPerability studies)

The MFR and the EMS.

NEBOSH Certificate Essentials

Professional Responsibility and Ethics

Safety Management By Dr. Ali Saleh.

Presentation transcript:

INTRODUCTION TO SAFETY

WHAT IS SAFETY/LOSS PREVENTION? The prevention of accidents through the use of appropriate techniques OR technologies to identify the hazards and reduce/eliminate them before the occurrence of an accident Keywords: Prevention, Identify, Eliminate

TRIVIA Q: What are the differences between safety and loss prevention?

Safety is the old way to prevent accident by using passive strategies such as Personal Protective Equipment (PPE) and rules&regulations Loss prevention is a reactive term for accident prevention. Loss prevention emphasize on hazard identification, technical evaluation, and design of new engineering features

WHAT IS HAZARDS ? A chemical or physical condition that has the potential to cause damage to people, property or the environment

WHAT IS RISK? A measure of human injury, environmental damage, or economic loss in terms of both the incident possibility and the magnitude of the loss or injury

SYSTEM ATTITUDE FUNDAMENTALS EXPERIENCE TIME YOU! *Sharing with students – Pressure Testing Incident

GOOD, BETTER, BEST A GOOD safety program identifies and eliminates existing safety hazards An OUTSTANDING safety program is embedded with management systems that prevent the existence of safety hazards

Management Systems Safety reviews Safety audits HAZOP Checklists Application of technical knowledge Sharing with students – Checklist Samples

LEVEL OF ACCIDENT PREVENTION ELIMINATION SUBSTITUTION ISOLATION ENGINEERING CONTROL MANAGEMENT CONTROL PPEs

ENGINEERING ETHICS RMSAFETY

AICHE Fundamental Canons 1. Engineers shall hold paramount the safety, health and welfare of the public in the performance of their professional duties 2. Engineers shall perform services only in areas of their competence 3. Engineers…..