Rules for Brainstorming Introduction to Engineering DesignTM Unit 1 – Lesson 1.1 – Introduction to Design Process Rules for Brainstorming Project Lead The Way, Inc. Copyright 2007

Rules for Brainstorming Introduction to Engineering DesignTM Unit 1 – Lesson 1.1 – Introduction to Design Process Brainstorming A process used to find a solution to a problem by collecting ideas without regard for feasibility, which occur from a group of people brought together for a specific purpose. Slide 3: Remind students about the importance of recording all ideas on paper. Project Lead The Way, Inc. Copyright 2007

Rules for Brainstorming Introduction to Engineering DesignTM Unit 1 – Lesson 1.1 – Introduction to Design Process Rules for Brainstorming No criticism allowed Work for quantity Welcome piling-on Allow free-for-all Remind students that all ideas are important ideas. Project Lead The Way, Inc. Copyright 2007

Rules for Brainstorming Introduction to Engineering DesignTM Unit 1 – Lesson 1.1 – Introduction to Design Process No Criticism Allowed People automatically tend to evaluate each suggested idea - their own, as well as others. No criticism No negative comments Slide 5: Reiterate the importance about criticism. Often times if this happens not everyone in the group will give their ideas to the rest of the group. Project Lead The Way, Inc. Copyright 2007

Strive for Quantity People must experience “brain-drain” before the innovative, creative ideas can surface. Therefore, the more ideas, the more likely they are to be quality ideas.

Piling-on is Welcome Piling-on occurs when one member’s idea produces a similar idea or an enhanced idea. All ideas should be recorded.

Encourage Free-for-All Outrageous, humorous, and seemingly unimportant ideas must be recorded. It is common for the most off-the-wall idea to be the one that is the solution to the problem. The sky is the limit.

Based on Project Lead the Way – Introduction to Engineering Design Power Point – Rules for Brainstorming