ENGINEERING DRAWING & COMPUTER AIDED DRAWING (CAD) LECTURER NAME: MR. ADZLY ANUAR MEMBERS: ARUNMOLY ME SRI KUMARAN ME R.KANESAN ME075181

We from Salapia Dokko Communication (M) Shd. Bhd. are planning to create a new model phone which we are going to named it KAS 6190 which can make some different in the cyber world today. In the left side of the phone, we created two curves which will make the user to hold the phone easily and gives comfortable. The functions in the phone are: Have both connectivity (infrared and blue tooth) Internal Memory Card 128MB Loudspeaker 3.7V Lithium battery 1000 entry in phonebook 40 cord polyphonic ring tones MP3 Unlimited videorecorder 1.3 Mega pixel camera

To do this project, we used a software named Pro Engineer which provides to do 3d Modeling. In this software the most useful command is Extrude, which can show 2D sketch into 3D view. Other than that, we also use commands such as revolve, remove materials and so on. Although we used lots of commands the most use full commands is extrude and revolve.This project helps us to improve our knowledge and our involvement in using Pro Engineer. The project also made us to explore by our self some other commands and tools which we didn’t learn in the class such as spline curve Other than educational purpose, we also learn some moral values when we doing this project such as dedication and team work. We spend almost 10 hours and a whole night to do this project. Last but no least, I would like to thank our lecturers, Mr. Adzly Anuar and Mr. Jeffrey Tan for their assistance and guidance and we also like to thank them to give us chance to do this wonderful project which gives an exciting experience which we wont forget in our entire life.