1 Disassembly 1

2 Warning ●Sharp objects ●Do not attempt to eat or swallow Warning ●Possible toxic chemicals ●Do not attempt to eat or swallow Warning ●Sharp objects ●Wear gloves if possible Note ●Small objects may get lost easily ●Have a container handy 2

3 Thank you for purchasing the Iwata 9000 Dual-Action Airbrush! Disassembling your airbrush can be a daunting task if undertaken alone. In this instruction manual we will detail all the steps of the I-9000’s disassembly for the purposes of cleaning and parts removal or replacement. Please follow each step in sequence to make things easier for yourself. 3

4 Page 1- Cover LetterCover Letter Page 2- HazardsHazards Page 3- IntroductionIntroduction Page 4- Table of Contents Page 5- Tools/Equipment RequiredTools/Equipment Required Pages Disassembly Steps Page 16- Contact UsContact Us

5  Airbrush wrench  Small shoebox or container  Small piece of styrofoam  Your I9000

6 Step 1- Locate and hold your airbrush. Step 2- Pull the paint jar/reservoir from your airbrush. 6 (Return to Table of Contents.)

7 Step 3- Unscrew the cap of your paint jar. (You may use both hands if you wish.) Paint jar disassembly will be complete. Step 4- Set the unscrewed jar aside in a safe place. 7 (Return to Table of Contents.)

8 Step 5- Hold your airbrush with one hand. Step 6- Holding the front of the airbrush steady, untwist the back of the airbrush. 8 (Return to Table of Contents.)

9 Note: After removing, the back half should look like this. Step 7- Hold the retaining screw carefully and unscrew the needle assembly while holding it over your shoebox. 9 Disassembly Steps (Return to Table of Contents.)

10 Step 8- Making sure the airbrush is over a container like the shoebox, remove your airbrush needle. Note: A very small retaining spring will fall into your shoe box. 10 Disassembly Steps (Return to Table of Contents.)

11 Note: The piece will look like this. Place it in your airbrush jar for safekeeping. Step 9- Hold your airbrush needle. Disassembly Steps (Return to Table of Contents.)

12 Step 10- Unscrew the rear retaining nut. Place the assembly in shoe box. Step 11- Remove the retaining screw by sliding it off of the back end of the needle. Disassembly Steps (Return to Table of Contents.)

13 Step 12- Place your needle sharp end down into the styrofoam OR in your airbrush jar sharp end up for safekeeping. Note: Please be extremely careful when handling your airbrush needle. It is damaged VERY easily. Disassembly Steps (Return to Table of Contents.)

14 Step 13- Remove your main control lever by lifting it out of the assembly. Step 14- Use your wrench to unscrew the jet nozzle counterclockwise. Disassembly Steps (Return to Table of Contents.)

15 Step 15- Remove the nozzle and place it in a box for safe keeping. Congratulations! Disassembly is complete! Disassembly Steps (Return to Table of Contents.)

16 Mailing Address Iwata Airbrush Distributors 3203 Market Plaza Suite #23 Balevore, Massachusetts Phone ext (Return to Table of Contents.)