KITCHEN KING & KITCHN EMPEROR, PRINCE DX TROUBLE SHOOTING SYMPTOMREASONACTION No beep or LED does not blink after power is switched on The power cord is not properly plugged. Plug the power cord into the power socket properly. Internal Fuse BlownCall Customer Care. The system Display ER:P & stand by, Vessel does not heat up Vessel size is not suitable Ensure the vessel is made of magnetic conductive material and has a base diameter larger than 8 cm Vessel material is Not suitable Use flat bottom vessel of recommended material only Vessel is not placed in the center of the Ceramic Plate Place the Vessel in the circle of the ceramic plate Display "HI:t" & stand by mode Internal Temp is very highWait till the system cools down FAN DefectiveCall Customer Care. Display "EA:E" & stand by modeVessel temperature high or Empty vessel Swtich oof the system & wait till the vessel cools down Display "EA:S" & stand by modeInternal sensor: failure/loose / open connectionCall Customer Care. Display "EA:C" & stand by mode Internal induction coil: failure/loose/ open connection Call Customer Care. "LO:U' Display System is shut down in under voltage (120V) protection Wait for correct voltage "HI:U' Display System is shut down in over voltage (280V) protection Wait for correct voltage ICT ERROR CODES: KING, EMPEROR, PRINCE DX. IN HOUSE

ICT ERROR CODES: PRINCE

ICT ERROR CODES: QUEEN IN HOUSE

ICT ERROR CODES: GALAXY & GALAXY PRO

ICT ERROR CODES: ASTRO

ICT ERROR CODES: SMART COOK

ICT ERROR CODES: CAPTAIN