Submission doc.: IEEE /0073r0 September 2015 Alaa Mourad, BMW GroupSlide 1 Wireless Coexistence in the Automotive Environment – Interest group Date: Authors: Notice: This document has been prepared to assist IEEE It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Submission doc.: IEEE /0073r0 September 2015 Alaa Mourad, BMW GroupSlide 2 Abstract This document defines the scope and the time plan of the interest group (Wireless coexistence in the automotive domain)
Submission doc.: IEEE /0073r0 September 2015 Alaa Mourad, BMW GroupSlide 3 Background It has been decided to create an interest group to study the wireless coexistence in the automotive domain under WG, as there are many members interested in this topic The scope and the time plan were not fixed in the last conference calls
Submission doc.: IEEE /0073r0 September 2015 Alaa Mourad, BMW GroupSlide 4 Scope of the Interest group Metrics for the performance of coexistence techniques should be defined and tests to verify their effectiveness should be performed. The Metrics should be more general and not specific for certain domain Extensive measurements are needed to check the performance of both Bluetooth and WLAN in different scenarios in vehicle Which frequency bands should be considered (only 2.4GHz or 5 GHz as well)? Which systems should be considered (WLAN, BT, LAA,.. )?
Submission doc.: IEEE /0073r0 September 2015 Alaa Mourad, BMW GroupSlide 5 Time plan It depends on the participants opinion, however it is recommended to have a well defined time plan and target in order to focus on the group and deliver good results on time Any Suggestions ?