Roman Architecture: High Resolution version This presentation does not automatically run. At anytime during this presentation you may advance forward with the right arrow (  ) or go back with the left arrow (  ). You may also navigate with the links at the bottom of each page.

Roman Architecture (in 10 minutes or less) Basics Examples Resources Roman architecture stands today as a testament to the ability and grandeur of this once great civilization that, at one time, covered three continents. The common style of architecture formed a thread that helped keep the vast Roman empire connected. Their great theaters and amphitheaters were wonders that could seat thousands of people and are still impressive, both in size and volume, today. Their development of the arch and concrete influenced architecture for centuries to come. Doric Ionic Corinthian Tuscan Composite Aqueducts Baths Arches, Amphitheatres & Monuments source text for this PP web resources

Doric Style - Columns built in this style usually had no base and consisted of a massive shaft with 20 flutes. Doric architecture predates the 5th century BC. It was infrequently used, but examples are seen in the Parthenon and Colosseum in Rome (see below). Later Roman columns differ from the Greek version in their addition of a base and changes in the capital profile. Parthenon Colosseum Basics ExamplesText / Web ResourcesHome

Basics Examples Text / Web ResourcesHome Ionic Style - More visibly complex than that of the Doric style, being of slender proportion, and their height being generally about nine times the column's lower diameter; the order is always used with a base and the column shaft usually has 24 flutings.

Corinthian Style - This is the most ornate of the classical styles and is generally much more slender than the Ionic style. The Romans used the Corinthian order in numerous monumental works of imperial architecture. They gave it a special base, made carved additions to the cornice, and created numerous capital variations, utilizing florid leafage and sometimes human and animal figures. The prevailing form of Roman Corinthian is seen in the Maison Carrée in Nimes, France (below left). This style originated after the 5th century BC. Basics Examples Text / Web ResourcesHome

Tuscan Column - The Tuscan column was the next form to be introduced and it was introduced by the Etruscans. The Tuscan Column is a very simple, plain column with a base and non-fluted shaft. No major (historical) examples of this architectural type survive today. Basics Examples Text / Web ResourcesHome

Composite Order - The final architectural type to come from the classical world is the Composite order and it was first seen in 82 AD on the arch of Titus. The Composite form is a combination of Ionic and Corinthian orders. This form was the most complex due to the fact that it used the arch. Due to the advances of the Composite style of architecture and the skill that the Romans had with concrete, the Romans were able to develop such architectural marvels like the arch,the vault and the dome. One of the most famous domed buildings to come from the ancient Romans was the Pantheon built in the last century BC by Marcus Agrippa and later refurbished by Hadrian. This building was originally built as a temple to all the Roman gods but was later converted into a Christian temple. This building has the honor of being the oldest,and largest, free standing dome in history. Basics Examples Text / Web ResourcesHome

Aqueducts The Roman development of the arch also led to the building of the great aqueducts for which were used to transport great amounts of water over vast miles of land. The need for aqueducts occurred in Rome during the mid republic due to the fact that the Tiber river had gotten too muddy and polluted from waste dumping and other deeds. As time went on, numerous aqueducts were built in Rome and throughout the empire in general. The early Roman aqueducts consisted of plain stone slabs and earth lime mixtures. The style and sophistication of aqueducts evolved as time went on. Because of the Roman Aqueduct, the public baths and water fountains were kept operational due to the abundant access to fresh water. The result of this was the easy access to people of all classes to fresh water and bath facilities which set a sanitary standard that would not be met until the19th century. Basics Examples Text / Web ResourcesHome

To transport the water over great distances, the Roman Aqueduct worked with the principals of gravity and they also had special basins between the source and the destination that would help purify the water. Once the water had reached the destination, it was kept into a storage tank where it would be distributed by pipes to different locations at the city. Some lucky upper class people had water piped directly to their residence,the earliest known form of a sophisticated pipe system. By the end of the Western Roman empire, the city of Rome had many prominent aqueducts within her boundaries. The most notable of these aqueducts are the Aqua Appia,the first Roman aqueduct, and the Aqua Claudia, built by the emperor Claudius and would remain one of the largest in the city.In the empire,when times were strained,some emperors chose to simply improve on existing aqueducts rather than construct new ones. Aqueducts (2) Basics Examples Text / Web ResourcesHome

Though the Romans were not the first to have a mass water system, the Greeks had water pumps in the cities, their system is important because it was the first time water was available to everyone on such a mass scale. When the western empire did fall, so fell her complex and ingenious water system. With no engineers or funds to maintain them, the aqueducts,like everything else Roman fell prey to the barbarians of the middle ages. Perhaps the most well preserved aqueduct is Pont du Gard near Nimes, France (pictured). Aqueducts (3) Basics Examples Text / Web ResourcesHome

Baths With the water system that the Aqueduct allowed, the Roman public baths got more sophisticated and grew in size as time went on. By the second century AD, public baths had grown in size and variety. In these new facilities, the pampered could do everything from eat to exercise and even read. Under such famous emperors as Titus, Caracalla and Diocletion, magnificent baths were constructed that could house thousands of people at a single time. These later baths were constructed in different sections. Upon entrance into the bath house, the patron would first enter a changing room in which they would undress themselves before continuing into the exercise room. After a period of exercise, the patron would then go to the warm baths,in the tepidarium, then to the cold baths, in the frigidarium. After their bath, the patron could have a massage if he/she wished so. Basics Examples Text / Web ResourcesHome

What makes the Roman bath houses such an architectural and engineering wonder, other than their great size, is the system that the Romans had for maintaining them. In the cold and hot areas of the bath, the water temperature was actually regulated by the use of underground fire furnaces. Also, the dirty water in the baths was actually drained and replaced regularly. The bath house also had a hookup to the complex Roman water system and so always had an ample source of water, for both bathing in and for drinking. The great sanitary conditions of the bath house were major factors that helped to make the Roman empire the cleanest society up until the 19th century. Some of the most famous Roman Bath's that still exist are in Bath, England (pictured) and Baden-Baden, Germany. Baths (2) Basics Examples Text / Web ResourcesHome

Arches, Ampitheaters and Monuments The grand public structures that the Romans left are the greatest legacy to their once great empire. Their great amphitheaters and monuments, such as the triumphal arch, were great structures that were a marvel to the Romans and are still a marvel to us today. The Roman Amphitheater, like most styles of buildings, was influenced greatly by the Greek civilization. These structures were generally circular and used the arch as their style of building but some were known to be built into a mountain or hillside. The theaters and amphitheaters were quite big in size and could hold upwards of 50,000 spectators. The biggest, and most famous, Roman amphitheater was the Coliseum (see picture to right) which was built by the Flavian emperors Vespasian and Titus. This building was used for everything from mock sea battles to to gladiatorial fights. A special fact about the Coliseum is that it was originally built with a huge removable canopy to protect the spectators from the elements. Basics Examples Text / Web ResourcesHome

The great monuments that the Romans leave behind show a great skill and an admiration for the accomplishments of their leaders and the grandeur of their empire. Most Roman monuments were constructed using the arch and had the details carved into them. The arch was usually very big and was a prominent feature of the skyline of the town in which it was located. End... Basics Examples Text / Web ResourcesHome

Source text for this Powerpoint: Basics Examples Text / Web Resources Home