Panasonic KX-TDE With SIP Trunking TDE0.0001 SIP presentation Notes Specifications subject to change without notice

Press the Activation Key Install Sip Card Press the Activation Key Install a V-SIPGW16 Card in an available slot and take the card out of service

Activation Key Do Not Activate this key The Sip Trunk will use the 4-Channel IP Trunk License

Shelf Property-Virtual SIP Gateway This will be the customers Static IP Address

Card Property- Virtual SIP Gateway Enter the Preferred and Alternate DNS Server IP. This can be found in the CMD prompt by typing Ipconfig /all

Port Property- Virtual SIP Gateway Change the first bin to Basic Channel. You may purchase up to 16 Additional Channels. The DSP16 comes with a license for 4, and the DSP comes with a license for 16. Each additional bin would be listed as Additional Channel for CH1

Port Property- Virtual SIP Gateway Enter the IP Address given to you by the provider

Enter the Extension Number given to you by the Provider

Port Property- Register Re-enter the IP Address given to you by the Provider

Select the Codec the Provider is using Port Property Select the Codec the Provider is using

IPCMPR Card Property The IPCMPR Card must have the correct IP Address, Subnet Mask and Default Gateway entered

Place the SIP Trunks in a Trunk Group by themselves 10.1 CO Line Settings Place the SIP Trunks in a Trunk Group by themselves

Change the DID setting to DIL and assign the correct Ring Group 10.2 CO DIL Table Change the DID setting to DIL and assign the correct Ring Group