CDS DIRECTIONAL CONTROL VALVES CH60 CH100

FEATURES AND BENEFITS 3 - Cost saving products 2 - Easy servicing 4 - High quality level 5 - Good Performance 1 - Easy Configuration - Simplify project planning and system design - Requires that SD has good service net

CONFIGURATION GENERAL DATA Average weight -40°C TO +80 °C (-40 °F TO °F )

CONFIGURATION STACKABLE-TYPE

CH60 Dimensions CONFIGURATION

CH100 Dimensions

CONFIGURATION LOW PRESSURE DROP THROUGH THE OPEN CENTER

CONFIGURATION TIE RODS KIT (CH 60 & CH100)

INLET COVER - MODELS CONFIGURATION & & SEE IT LATER CH MODELS CH MODELS

INLET COVER - PORTS OPTIONS & CONFIGURATION

INLET COVER CONFIGURATION Main Relief Valves Options 2 Options

CONFIGURATION AVAILABLE THREADS FOR INLET COVER 9 TYPES

OUTLET COVER - MODELS CONFIGURATION & 2 TYPES

OUTLET COVER - PORTS OPTIONS CONFIGURATION 11 OPTIONS

OUTLET COVER CONFIGURATION (HYD. SCHEME) PORTS OPTIONS

CONFIGURATION AVAILABLE THREADS FOR OUTLET COVER 6 TYPES

WORK SECTIONS - MODELS CONFIGURATION CH TYPES CH TYPES

CIRCUIT TYPES CONFIGURATION 1 - PARALLEL CIRCUIT (96%) 2 - TANDEM CIRCUIT (4%) 3 - SERIES CIRCUIT

CONFIGURATION 1 - PARALLEL CIRCUIT (96%) Most used in mobile equipment More than one function can be operated at the same time

CONFIGURATION 2 - TANDEM CIRCUIT (4%) Priority

3 - SERIES CIRCUIT (only CH60) CONFIGURATION

SPOOL TYPES CH TYPES CH TYPES

CONFIGURATION SPOOL TYPES

SPOOL TYPES - IDENTIFICATION CONFIGURATION

SPOOL CONTROL TYPES 11 SPOOL CONTROL TYPES

CONFIGURATION SPOOL CONTROL TYPES

CONFIGURATION SPOOL CONTROL TYPES

CONFIGURATION SPOOL CONTROL TYPES

CONFIGURATION SPOOL CONTROL TYPES

CONFIGURATION SPOOL CONTROL TYPES

CONFIGURATION SPOOL CONTROL TYPES

CONFIGURATION SPOOL CONTROL PROTECTION BOOTS ( RUBBER PROTECTORS) CH60 - CODE No CH100 - CODE No

SPOOL CONTROL SIDE 3 OPTIONS CONFIGURATION

CENTERED TYPES 11 CENTERED TYPES

CONFIGURATION CENTERED TYPES

CONFIGURATION CENTERED TYPES

CONFIGURATION CENTERED TYPES

CONFIGURATION AVAILABLE THREADS FOR WORK SECTIONS 6 TYPES

CONFIGURATION AUXILIARY VALVES 9 AUXILIARY VALVE SEVERAL COMBINATION

CONFIGURATION AUXILIARY VALVES RELIEF VALVE - EXT ADJUSTMENT RELIEF VALVE - INT ADJUSTMENT PLUG

CONFIGURATION AUXILIARY VALVES PILOTED RETAINING FLOW CONTROL VALVE ANTI CAVITATION DIRECT RELIEF WITH ANTICAVITATION AND EXTERNAL ADJUSTMENT (EXCEPT ELECTRICAL DRIVE) DIRECT RELIEF WITH ANTICAVITATION AND INTERNAL ADJUSTMENT (ONLY ELECTRICAL DRIVE)

CONFIGURATION AUXILIARY VALVES COMPATIBILITY

SPECIAL INLET COVERS MODELS P60 & P100

SPECIAL INLET COVERS SECONDARY FLOWPRIORITY FLOW

SPECIAL INLET COVERS SECONDARY FLOWPRIORITY FLOW

SPECIAL SECTIONS AP - ADAPTER PLATES AP60/100 & AP100/60 I - FLOW DIVIDER / FLOW COMBINER M - MID INLET PRIORITY FLOW CONTROL & SPECIAL INLET COVER S60-XX & E100-XB3

AP - ADAPTER PLATE AP100/60 CH100 Working Section CH60 Working Section Adapter Plate AP 100/ Conversion Adapter Plate From CH 100 Series Working Section to CH 60 Series Working Section

AP - ADAPTER PLATE AP60/100 Conversion Adapter Plate From CH 60 Series Working Section to CH 100 Series Working Section CH100 Working Section CH60 Working Section Adapter Plate AP 60/

Pressure By pass Outlet Relief Valve Inlet (Second Pump) Special Plug I - FLOW COMBINER If the work sections before the Combiner are in Neutral Position the flow from the Pump 1 (Inlet Cover) will be added to the flow of the Pump 2 (“A” Port).

I - FLOW DIVIDER Pressure By pass Outlet Special Plug Relief Valve Outlet (First Pump) Inlet (Second Pump) The flow from the Pump 1 returns through the “A” port. “B” is the Inlet Port of the flow from the Pump 2.

M - MID INLET PRIORITY FLOW CONTROL - CH 60 (504054)

M - MID INLET PRIORITY FLOW CONTROL - CH60 (503892)

M - MID INLET PRIORITY FLOW CONTROL (504042)

M - MID INLET PRIORITY FLOW CONTROL (503653)

O-ring Qty. 04 Washer Space – Qty.03 E100-XB3 – X- TOP PORT PLUGGED SPECIAL INLET COVER FOR MID INLET PRIORITY FLOW FOR CH100

O-RING – Qty. 04 Washer Space – Qty.03 S60-XX SPECIAL INLET COVER FOR MID INLET PRIORITY FLOW FOR CH60

MAIN APPLICATIONS COMBINES – AGCO

MAIN APPLICATIONS TRACTORS – AGCO MODELS 200, 600, 5200, 5300

MAIN APPLICATIONS TRACTORS – VALTRA HEAVY AND MEDIUM LINES

MAIN APPLICATIONS LOADER AND BACKHOES – MASSEY FERGUSON (AGCO) MODELS MF86 AND MX750

MAIN APPLICATIONS CRANES – MADAL – IMAP – MASAL

AG SPRAYERS – JACTO MAIN APPLICATIONS

GARBAGE TRUCK – EQUITRAN COLECTOMATIC 4000 – USIMECA MAIN APPLICATIONS