Code : STM#561 Samsung Electronics Co., Ltd. OfficeServ SW Upgrade Distribution EnglishED01

© Samsung Electronics Co., Ltd. 2 Objectives After successful completion of the course the trainees should be able to execute the following activities.

© Samsung Electronics Co., Ltd. 3 Contents General General GWIM QoS GWIM QoS GSIM QoS GSIM QoS

© Samsung Electronics Co., Ltd. 4 SW Upgrade by GUI SW Upgrade by GUI

© Samsung Electronics Co., Ltd. 5 SW Upgrade Run the Web Browser. Access the initial IP of GWIM/GSIM/GPLIM using HTTPS. The IP initial value of each board is as follows: GWIM /24(eth0), /24(eth1), /24(eth2) GSIM – /24(rd1) GPLIM – /24(vsd) Note In case of upgrading GWIM SW from v1.12 to v1.25 you should use bootloader. Because GWIM v1.12 SW has some problem in upgrading using Web Management. Other versions of GWIM and GSIM/GPLIM will have no problem with Web Management.

© Samsung Electronics Co., Ltd. 6 SW Upgrade Login using the administrator ID and Password. (ID : admin / Password : root)

© Samsung Electronics Co., Ltd. 7 SW Upgrade Select the [System → Upgrade] menu. For the types of upgrade, there are ‘TFTP method’ and ‘File Transmission method through HTTP’ as well as Local method that uploads the user’s PC.

© Samsung Electronics Co., Ltd. 8 SW Upgrade The package version to upgrade should be entered like ‘v1.24’ in the [Package Version] field.

© Samsung Electronics Co., Ltd. 9 SW Upgrade For TFTP / HTTP, enter the address of the TFTP/HTTP server and click the [OK] button. S/W Package file name : gwim-pkg-v{version_number}.tgz Enter the address of the TFTP/HTTP server

© Samsung Electronics Co., Ltd. 10 SW Upgrade For Local method, the relevant package file should be existed in the user’s PC. Click the [OK] button after selecting the file. (In the TFTP / HTTP method, the files of the relevant version are searched automatically and downloaded, bur fot Local method, the entered version name and file name to upload should be identical. If Package Version is 'v1.24', the file name is ‘gwim-pkg-v1.24.tgz'. )

© Samsung Electronics Co., Ltd. 11 SW Upgrade by CLI SW Upgrade by CLI

© Samsung Electronics Co., Ltd. 12 Environment (7200) TFTP server e.g. Execute the PumpKIN program. S/W package exists in the TFTP server directory Management PC Serial I/O cable TFTP root directory IP : Hub or Switch

© Samsung Electronics Co., Ltd. 13 Environment (7400) TFTP server e.g. Execute the PumpKIN program. S/W package exists in the TFTP server directory Management PC Serial I/O cable TFTP root directory IP : Hub or Switch GPLIM eth0eth1 eth2 GWIM V.35 HSSI

© Samsung Electronics Co., Ltd. 14 S/W Upgrade using TFTP (on the bootloader) Procedure Connect the serial cable to the SIO port of Board (baudrate : 19200) Enter the ‘D’ key after resetting the Board. Then the system goes into Bootloader Mode. U-Boot (Jun :07:53) OfficeServ 7400 SAMSUNG (GWIM v0.11) CPU: 750GX 996 MHz BOARD: GWIM v0.11 DRAM: 512 MB Now running in RAM - Memory Address is 0x0ffcd000 FLASH: MB In: serial Out: serial Err: serial Net: mv_enet0, mv_enet1, mv_enet2 Hit 'd' or 'D' key to stop autoboot : 0 GWIM =>

© Samsung Electronics Co., Ltd. 15 S/W Upgrade using TFTP (on the bootloader) Reset the previous setting environment Set the environment for TFTP GWIM => protect off bank 1 ; remove the flash protection GWIM => erase 0xfc xfc03ffff (or erase bootcf) ; erase the current setting environments / : done Erased 1 sectors GWIM => reset GWIM : 0xfc xfc03ffff GSIM : 0xe xe00fffff GPLIM : 0x2c x2c01ffff GWIM => setenv ethaddr = ; erase the MAC address because MAC address isn’t overwritten GWIM => setenv ethaddr 00:00:00:00:00:01; setting the MAC address which isn’t duplicated GWIM => setenv ipaddr ; is temporary IP address GWIM => setenv serverip ; is the TFTP Server IP address GWIM => setenv netmask GWIM => setenv pkgversion 1.24; 1.24 is the package version to upgrade GWIM => saveenv; save the current setting environments

© Samsung Electronics Co., Ltd. 16 S/W Upgrade using TFTP (on the bootloader) If you want to know the current setting environments, enter the “printenv” command. GWIM => printenv bootldrstart=0xff bootcfstart=0xfc osstart=0xfc configdbstart=0xfd logdbstart=0xfda00000 bootldrend=0xff87ffff bootcfend=0xfc03ffff osend=0xfc1fffff firmwareend=0xfd6fffff configdbend=0xfd9fffff logdbend=0xfdffffff bootldrfile=gwim-bootldr.img-v bootcffile=gwim-bootcf.img-v osfile=gwim-os.img-v firmwarefile=gwim-firmware.img-v configdbfile=gwim-configdb.img-v logdbfile=gwim-logdb.img-v downloadaddr=0x bootargs=console=ttyS0,19200 bootcmd=setenv bootargs $(bootargs) $(rootpath); bootm $(osstart) $(firmwarestart);

© Samsung Electronics Co., Ltd. 17 S/W Upgrade using TFTP (on the bootloader) Enter the “install all” command install [os | firmware | configdb | logdb | all] os : Linux Kernel firmware : Root File System configdb : Config DB File System logdb : Log DB File System all : All of them bootdelay=5 baudrate=19200 loads_echo=0 ipaddr= serverip= rootpath=root=/dev/ram rw ethact=mv_enet0 firmwarestart=0xfc pkgversion=0.24 ethaddr=00:00:00:00:00:01 stdin=serial stdout=serial stderr=serial Environment size: 884/ bytes GWIM =>

© Samsung Electronics Co., Ltd. 18 S/W Upgrade using TFTP (on the bootloader) GWIM => intall all Ethernet status port 0: Link up, Full Duplex, Speed 1 Gbps Using mv_enet0 device TFTP from server ; our IP address is Filename 'gwim-os.img-v0.12'. Load address: 0x Loading: | : done Bytes transferred = (ee3a6 hex) | : done Erased 7 sectors Copy to Flash... : 100 % : done Ethernet status port 0: Link up, Full Duplex, Speed 1 Gbps Using mv_enet0 device. TFTP from server ; our IP address is Filename 'gwim-logdb.img-v0.12'. Load address: 0x Loading: | : done Bytes transferred = (20000 hex) | : done Erased 24 sectors Copy to Flash... : 100 % : done GWIM => reset

© Samsung Electronics Co., Ltd. 19 S/W Upgrade using TFTP (on the bootloader) Note When you upgrade S/W package on the bootloader, you connect a PC to the debug port in the board. While the debug port of GSIM and GPLIM isn’t a front port of the board but inner port of the board, GWIM just uses a front port of the board for debug.

Samsung Electronics Co., Ltd.