© 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice HP CM8060/8050 Color MFP with Edgeline Technology Service and Support Training Install Module
Install and Configure Decommission and move Site assessment Install the MFP and accessories Calibrations, configurations, and tests Customer walkaround
May HP Restricted 3 Site Assessment Workbook Key Points Order information (MFP and accessories ordered) Customer information (contact information) Technical site setup checklist (physical, environmental, electrical) Logistics checklist Network and configuration information checklist Specifications Unit acclimation information
May HP Restricted 4 Install Guide Key Points Site preparation and unpacking information Installation instructions for the MFP Installation instructions for each accessory Power-on calibration and settings instructions Moving the unit Narrow door information Install checklists Shipping kit descriptions Customer walkaround checklist Digital send setup checklist
May HP Restricted 5 Install the MFP Unlock scanner Install fax Install ADF Install control panel overlay Set language, date, time, trays, etc. CDFT settings CDFT calibrations Functional tests Install Tray 5 brackets on MFP Unlock carriage Install pens Set paper length/ width (A4/letter) Load media Remove shipping restraints Load media Power cord Network cable Fax cable Install ink cartridges Install finisher or SOB brackets on MFP Carpet kit Set caster height to align finisher- MFP gap Set stapler position (letter/A4) Install output bins
May HP Restricted 6 Calibrations, configurations, tests Various calibrations, configurations, and tests must be performed after the installation is complete Follow instructions in the install guide
May HP Restricted 7 Decommission and move Determine the type of move: Local move – From one location to another within the same building or office campus. Ensure proper pen handling. Extended move – From one location to another within the same city. Ensure proper pen handling and install pen- pocket shipping restraints. Decommission move – From one city, country, or region to another. Extensive preparation required – ensure you crate MFP and accessories properly. Use the checklist and instructions in install guide
May HP Restricted 8 Preparing for shipment 1)Remove paper 2) Remove trays 1)Park scanner head 2)Lock scanner Install accumulator restraints Install stapler shipping foam block Close horizontal transport 1)Remove ADF 2)Tape cover over scanner glass Tray 1 in home position 1)Remove pens 2)Install shipping pens 3)Lock carriage Remove paper Remove ink cartridges Install shipping restraints (or paper) Close dryer
Lab
May HP Restricted 10 Customer walkaround Use the customer walk-around checklist Demonstrate most functions Use customer’s real print or copy jobs Allow plenty of time for questions