The stabilizer bar and tab are under the seat. They provide a convenience benefit of keeping the wheels parallel when the chair is folded Does not contribute to safety or comfort Without it, the RoughRider is fully functional with without

The potential problem: The bolt (in photo) is welded to the bar Increases force on stabilizer tab

The potential problem: The bolt is welded to the bar and this increases force on stabilizer tab This can cause the weld between the frame and the Stabilizer Tab to break. It is unknown how often this will occur but has only been observed once The failure is not dangerous, just inconvenient

How to Easily Fix 1)Remove the stabilizer bar completely from the frame using the included 17mm wrench 2)Use a bungee cord to hold the chair handles together when folded Stabilizer Bar Removed

How to Easily Fix 1)Remove stabilizer bar 2)Use a bungee cord to hold the chair together at the pushing bar Bungee In Use

Each user will be given: 1)A printed description of the potential malfunction in Español and how to correct for it. 2)Small bungee cord After