Safety Edition jeopardy jeopardy jeopardy jeopardy

C.S.E.

L.O.T.O.

On The Road

P.P.E.

Haz-Com (MSDS)

C.S.E.L.O.T.O. On the Road P.P.E. Haz-Com (MSDS)

This document must be filled out and on site prior to entry into a confined space.

This program supplements the company CSE program and must be used whenever entry is required

This person is responsible for entering the space and performing the required work

This person is positioned at the entry point but is not allowed entry. Maintains constant contact with the entrant. Monitors conditions, and has overall control of tasks.

These 3 things must be present in order for a space to be considered a “confined space”…. (must provide all 3 correctly for credit)

The purpose of L.O.T.O. is ….

It is acceptable to remove another person’s lock when….

The first step in the lock out process is ….

L.O.T.O. procedures can be found…..

An employee must have this before permission is granted for them to lock out equipment.

According to the DMV’s CDL handbook, a good driver looks __ to __ seconds ahead of them

These 2 items constitute an “accident” or “incident”

By law, this must happen before a driver moves their vehicle at the beginning of each shift.

When on the road, you should always drive this way, not the team that has the ball.

As a CDL driver, these two items are the only things you are not criminally responsible for in a court of law on your company issued truck. They are a must on your personal vehicle.

A hardhat must be replaced when it’s age is __, or if this happens.

Safety glasses must have this stamped on them in order to be compliant as safety glasses

Finish the following: Leather gloves should be worn…. Rubber gloves should be worn….

You can be given one of these on a jobsite, even though you don’t work for the contractor.

Explain why you cannot wear a ball cap or knitted cap under a hardhat.

This document will tell you everything you need to know about a chemical

As trained employees, you have responsibility to keep up with this so that products may be identified

These are the people responsible for producing MSDS’s on any chemical or material

It is ok to store any and all chemicals in one place? Why or why not

These are just 5 of the sections you will find on any MSDS