CCNA 1 v3.0 Module 7 Ethernet Technologies

Purpose of This PowerPoint This PowerPoint primarily consists of the Target Indicators (TIs) of this module in CCNA version 3.0. It was created to give instructors a PowerPoint to take and modify as their own. This PowerPoint is: NOT a study guide for the module final assessment. NOT a study guide for the CCNA certification exam. Please report any mistakes you find in this PowerPoint by using the Academy Connection Help link.

To Locate Instructional Resource Materials on Academy Connection: Go to the Community FTP Center to locate materials created by the instructor community Go to the Tools section Go to the Alpha Preview section Go to the Community link under Resources See the resources available on the Class home page for classes you are offering Search Contact your parent academy!

Objectives 10-Mbps and 100-Mbps Ethernet Gigabit and 10-Gigabit Ethernet

Types of Ethernet

Parameters for 10 Mbps Ethernet Operation

10BASE5 Architecture Example

10BASE2 Network Design Limits

10BASE-T Modular Jack Pinouts

10BASE-T Repeated Network Design Limits

Parameters for 100-Mbps Ethernet Operation

100BASE-TX Modular Jack Pinout

1000BASE-FX Pinout

Example of Architecture Configuration and Cable Distances

Parameters for Gigabit Ethernet Operation

Outbound (Tx) 1000Base-T Signal

1000BASE-SX and LX

Gigabit Ethernet Media Comparison

Gigabit Ethernet Architecture Maximum 1000BASE-SX Cable Distances Maximum 1000BASE-LX Cable Distances

Parameters for 10-Gbps Ethernet Operation

10-Gigabit Ethernet Implementations

Future of Ethernet The Expanding Scope of Ethernet