QuickWalls® strong. fast. simple. *Light Weight *Insulated *Load Bearing *Pre-Fabricated *Tilt Up *House Wall Panels *Assembling Both Inner & Outer Walls in 1 Go Replace image with a “real “ full size image of our wall panel…later when pallet unloaded

Replace Timber Frames, Bricks, Hebal Panel, Foam Cladding Products with our Prefabricated Walls ready for a rendered finish on the exterior face & painting on the interior surface We Supply and Install Quick Walls starting at $180 p.sm. All we need is a finished concrete floor slab PLUS windows & internal wall frames on site . Assuming a single storey villa unit at 150 s.qm. (Plans & Engineering attached). 5 days later you have your dwelling at lock up stage with external walls ready for render finish. Quick Walls will deliver a faster build than Hebal Panel which is fixed vertically to horizontal top hats, attached to the load bearing wall frame . OUR PRODUCTS ADVANTAGE -- NO TIMBER FRAME

TECHINICAL DATA Meets relevant Australian building standards Panels are strong enough to build multiple storeys with little additional framing except around openings and point loads Tested for axial, transverse and racking strength - tested as superior to conventional framing assemblies Sound Transmission integrity - reduces outside noise penetrating living environment Thermal Rating R 4.75

TECHINICAL DATA How QuickWalls ® are made: Panels consist of inner and outer walls Inclusive of insulation made of a fire retardant Polystyrene core Sandwiched between two structural grade Magnesia cement board facings To engineering tolerances In a local factory environment Assembled into wall sections Complete with services within walls External finish: Apply coating, cladding, stone etc. directly to wall panel Internal finish: As per plaster board, once flushed joined – paint directly over wall panels Electrical: Factory fitted conduits running vertically at 300mm centres within EPS foam core APPENDIX. REPLACED WITH TECHNICAL DATA

TECHINICAL DATA Panel facings: E- Mox brand structural construction grade Magnesia based Sorel board Thickness 12 mm Density 950 kg/m3 Features formed tapered edges Panel core: Polystyrene sections Thickness 140 mm Expanded fire retardant polystyrene Finished panels: Thickness 165 mm Weight ≈ 80 Kilograms / panel Height 2440 / 2745 / 3050 mm Width 1200 mm: