Beamline Readiness Review - Hutch Beamline Microdiffraction March 28, 2006

Floor Plan, Sector 12 25L760C

Sector 12 superbend beamlines , &

Hutch Assembly Details

Hutch construction drawing from vendor

Wall panel construction 2mm sheet lead 1” thick - 4# mineral wool insulation 14 gauge steel Prior to assembly, interior materials have combined thickness of 52.8mm

After assembly, the interior components have been compressed to 47.6mm from 52.8mm Wall panel construction

Wall panel connection detail

Typical Wall Panel with Pb sheet installed

Panel with second layer of insulation installed

Front wall prior to second layer of insulation Window

2 nd front wall panel with opening for beampipe

Typical wall corner with Pb bent along vertical edge

Different corner with 2 nd layer of insulation

H- channel with Pb captured Pb

Pb visible in all of these H-channel units

bottom side

Pb Framed opening detail – labyrinths, beampipe opening

Labyrinth Pb detail prior to insulation Pb in track prior to steel cap

Labyrinth detail

Labyrinths after Pb shielding applied

Labyrinth with detail of how Pb is doubled over

Overview of back wall construction

1” overlap from Backwall to flashing Roof to back wall connection detail

Back wall Pb overlap detail

Fastening tabs to secure to structural brace Pb overlap Back wall right side

Back wall detail Lead laminated to steel Steel

Back wall detail 2 Lead overlap for next panel

Roof – Wall panel connection