Using your Diagnostic Station

ADC by SunTech Adview features Overview of the ADC by SunTech AdviewOverview of the ADC by SunTech AdviewOverview of the Overview of the Taking an automated BP measurementTaking an automated BP measurementTaking an automated BP measurementTaking an automated BP measurement Taking a manual BP measurementTaking a manual BP measurementTaking a manual BP measurementTaking a manual BP measurement Taking a temperature measurementTaking a temperature measurementTaking a temperature measurementTaking a temperature measurement Taking an SpO 2 measurementTaking an SpO 2 measurementTaking an SpO 2 measurementTaking an SpO 2 measurement Recalling the last readingRecalling the last readingRecalling the last readingRecalling the last reading Clearing the last readingClearing the last readingClearing the last readingClearing the last reading Need help?Need help?Need help?Need help? Overview of the ADC by SunTech AdviewOverview of the ADC by SunTech AdviewOverview of the Overview of the Taking an automated BP measurementTaking an automated BP measurementTaking an automated BP measurementTaking an automated BP measurement Taking a manual BP measurementTaking a manual BP measurementTaking a manual BP measurementTaking a manual BP measurement Taking a temperature measurementTaking a temperature measurementTaking a temperature measurementTaking a temperature measurement Taking an SpO 2 measurementTaking an SpO 2 measurementTaking an SpO 2 measurementTaking an SpO 2 measurement Recalling the last readingRecalling the last readingRecalling the last readingRecalling the last reading Clearing the last readingClearing the last readingClearing the last readingClearing the last reading Need help?Need help?Need help?Need help? Contents

Overview of the ADC by SunTech Adview BP Module Pressure column 1 bar = 10mmHg Automatic button Manual button Warning icon Cuff/Hose Error icon Systolic BP/ Cuff pressure Diastolic BP Pulse rate icon MAP icon Pulse rate/ Mean Arterial Pressure (MAP) Contents

Overview of the fully configured ADC by SunTech Adview Temperature Mode button Retention clip Temperature Module Signal quality Contents BP Module SpO 2 Module

Press the auto button to take an automatic measurement OR Press and hold the manual button to inflate the cuff, and take a traditional manual reading with a stethoscope Taking a BP Measurement Contents

Taking an automated BP measurement 1.Wrap cuff snugly around upper arm. Click here to visit the ADC website for further details on proper placement. Click hereClick here 2.Ask the patient to stay still and quiet, press and release the automatic button to start an automatic measurement. 3.A measurement is displayed in about seconds 1.Wrap cuff snugly around upper arm. Click here to visit the ADC website for further details on proper placement. Click hereClick here 2.Ask the patient to stay still and quiet, press and release the automatic button to start an automatic measurement. 3.A measurement is displayed in about seconds Contents

Taking a manual BP measurement 1.Wrap cuff snugly around upper arm and position your stethoscope. 2.Press and hold the manual button to inflate the cuff to the desired pressure. 3.Watch the pressure displayed and quickly release the button to deflate the cuff at 3mmHg/sec. 1.Wrap cuff snugly around upper arm and position your stethoscope. 2.Press and hold the manual button to inflate the cuff to the desired pressure. 3.Watch the pressure displayed and quickly release the button to deflate the cuff at 3mmHg/sec. 4.When the measurement is determined, press the auto button to completely deflate the cuff. Contents

Taking a temperature measurement 1.Place a disposable cover on the blue probe; the display shows the type of measurement, (oral). 2.Wait for the device to beep. 2.Wait for the device to beep. 3.Then, place the probe under the patient’s tongue; the posterior medial sublingual pocket is preferred for accuracy. 4.A “traveling dash” displays for seconds until a reading is displayed. 1.Place a disposable cover on the blue probe; the display shows the type of measurement, (oral). 2.Wait for the device to beep. 2.Wait for the device to beep. 3.Then, place the probe under the patient’s tongue; the posterior medial sublingual pocket is preferred for accuracy. 4.A “traveling dash” displays for seconds until a reading is displayed. Contents

Taking an SpO 2 measurement For the reusable finger sensor, insert the patient’s digit into the sensor; a “traveling dash” displays for seconds until a reading is displayed. The reading is updated every second. Contents

Recalling the last reading Note: Measurements are displayed for 2 minutes after which the display shows Note: Measurements are displayed for 2 minutes after which the display shows Press and hold the Automatic BP button for seconds to display the last measurement values. Note: Measurements are displayed for 2 minutes after which the display shows Note: Measurements are displayed for 2 minutes after which the display shows Press and hold the Automatic BP button for seconds to display the last measurement values. Contents

Clearing the last reading Note: If there are privacy concerns with regards to measurements on the display, you can clear the display. Once cleared, they cannot be recalled. Press and hold the Automatic BP button for seconds to clear the last measurement values. Note: If there are privacy concerns with regards to measurements on the display, you can clear the display. Once cleared, they cannot be recalled. Press and hold the Automatic BP button for seconds to clear the last measurement values. Contents

Need help? Contact us by telephone: or or Or by Or find help on the Internet: Contact us by telephone: or or Or by Or find help on the Internet: Contents