Basic Notes for dxpSaturn EPICS for Ketek SDD It is currently using a PC (hostname: fujipc). –IP address is –Local user: dxp (password is on post-it note) –Use Remote desktop from a Windows PC. Make sure parallel port is plugged into the Saturn box and also PC. –Turn on the Saturn Box –Connect the “PA” BNC from the Ketek to the “Input” on the Saturn Box –The Ketek has no switch; screw on the power connector and plug into the wall. Start EPICS IOC from icon on the desktop –“start_Ketek DXP 40MHz” Don’t use the Vortex one!!!!!! –This will start 2 windows (EPICS ioc terminal & medm screen) Sometime you need to re-start the IOC several times before it works. You should hear it click and the I/O LED should flash.

Peaking time can be increased for better energy resoluti0.25us is the shortest you can go for best count rate.

Medm screens from linux control computers You can also open the medm screens on the linux control computers. I have put them on APSshare. So, from the an x-terminal type: – /APSshare/DetectorPool/start_dxpKetekSDD Documentation: –