Created by Ed, VE7ED

 For a Winlink user to receive a message, the sender's address must be listed in the recipient's whitelist (the accept list)  All Winlink accounts have this feature to purposely block mail from the internet that is not expected or permitted. This filter can be bypassed--and the mail will be delivered even if the sender is NOT on the recipient's whitelist--by including a special keyword in the subject line of the message

Access from VHF/UHF/HF  Have RMS Express installed  Need it connected to your radio  You must have access to a RMS Gateway  Have a Winlink password setup and know it Follow the instructions on the following radio slides

 SYSTEM: To: Subject: WHITELIST [In the message body, the following commands are  LIST: [will return a list of all whitelist entries]  ACCEPT: [will allow from to be accepted and delivered to You may send multiple lines with any command, each containing one address.  REJECT: [will reject any messages from You may send multiple lines, each containing one e- mail  DELETE: [will remove from your Whitelist. You may send multiple lines, each containing one address per Addresses without an will be treated as "domain names". For example, if "ACCEPT: arrl.org" were entered, then any message bearing any address using that domain (arrl.org) will be accepted.

Create – Post – Send – Wait – then Retrieve

Adding a domain to your Whitelist Adding a to your Whitelist

Reject a domain from Whitelist Rejecting address from Whitelist

Delete a domain from your Whitelist Delete a address from your Whitelist

Adding multiples entries can be done all at the same time. ’s or Domain’s or both Example: Accept: arrl.net Accept: bchydro.com Accept: Reject:

Old versions of Airmail have an OFF and ON option for the WHITELIST and the WHITELIST NOTICE in "Options Messages". These are no longer meaningful or functional since the Whitelist option is no longer optional. Please, always use current software!

Go to Login to your Winlink account (password required) Choose – My Whitelist To Add a callsign or domain, Type it on the address line and enter or click Save To Edit an address click on the Edit button beside the address. Now Edit it on the address line and enter or click on Save Delete the old address To Delete an address, Click on the Delete button to remove the address

Access from the Internet:  You must have internet access  You must have a password setup and know it  Go to  Save and Logout when done. Access from VHF/UHF/HF  Must have RMS Express  You must have a password setup and know it  Follow the instructions on the following radio slides