FAQ Frequent Asked Questions START. I have a TIER 2 combine (CX720------CX880, CR960-CR980) 5.When I put my data card in the combine’s data logger: DATACARD.

Slides:



Advertisements
Similar presentations
The essentials managers need to know about Excel
Advertisements

Setting up Articles Throughout this slide show there will be hyperlinks (highlighted in blue) follow the hyperlinks to navigate to the specified Topic.
How to validate in Budget Manager Hopefully now you have reached this stage you will have downloaded the inpatient and outpatients excel files for you.
Guide to uploading campaigns to the communication centre March 2013.
SAM 2007 v3.0 The Student Experience Including SAM Projects and Course Assess assignments.
FAQ Frequent Asked Questions about PLM and PFS. Start.
 Use the Left and Right arrow keys or the Page Up and Page Down keys to move between the pages. You can also click on the pages to move forward.  To.
VMWare Workstation Installation. Starting Vmware Workstation Go to the start menu and start the VMware Workstation program. *Note: The following instructions.
How to download and install Sharpdesk
Loading Excel Double click the Excel icon on the desktop (if you have this) OR Click on Start All Programs Microsoft Office Microsoft Office Excel 2003.
Field Day Logging Software & Paper Logging June 4, 2009.
TRACK 2™ Version 5 The ultimate process management software.
5-9/12/2005 CPE How to format your computer and re-install Windows XP.
Using the Unity 98 Cordless Response System Directions : Courtesy of IHC public relations.
EPOCH 1000 File Management Data Logging and Reporting
Generation of atlas graphs & charts. Objective The major objective this training session is to equip participants with the knowledge and skills of creating.
VMWare Workstation Installation. Starting Vmware Workstation Go to the start menu and start the VMware Workstation program. *Note: The following instructions.
Disclaimer This presentation is the property of MarketLinx Solutions™ and is intended for the exclusive use of NTREIS and may not be distributed, copied.
1 Vendor RFI - Event User Guide. 2 Minimum System Requirements Internet connection - Modem, ISDN, DSL, T1. Your connection speed determines your access.
TrendReader Standard 2 This generation of TrendReader Standard software utilizes the more familiar Windows format (“tree”) views of functions and file.
Information guide.
How to Download and Install a Sharp Print Driver on a Mac.
SMART Response Initial Set-up: Windows PC Teacher and Class Set-up Creating a Quiz, Test, or Survey Delivering an Assessment Reports Additional Question.
Back to content Final Presentation Mr. Phay Sok Thea, class “2B”, group 3, Networking Topic: Mail Client “Outlook Express” *At the end of the presentation.
Installing the SAFARIODBC.EXE For use with Excel May 3, 2002.
TrekView DMS Instructions. 1. Log in to TrekView DMS.
Ensure that the Field Day Call Sign is correct.
Topshare websites consists of two area’s: A public domain and a Secure domain. The public domains are regular website, viewable for everyone with a internet.
How to Download and Install a Print Driver on a Windows PC.
Geo II ch 5 Edited 10/14/05 1 GPS- Collecting Data Now that you have your data dictionary loaded, let’s configure the unit and take it outside! RECOMMENDED:
Thank you for your decision to try vTreePro Practice Tree Software! Your satisfaction is very important to us. Please feel free to send us an if.
1 2 Lab 2: Organizing Your Work. 2 Competencies 3 After completing this lab, you will know how to: 1. Use Explorer to manage files. 2. Copy files. 3.
Start the slide show by clicking on the "Slide Show" option in the above menu and choose "View Show”. or – hit the F5 Key.
Yield Monitors and Their Applications to Today’s Farmer
Installing and Using Active Directory Written by Marc Zacharko.
1. Insert the Resource CD into your CD-ROM drive, click Start and choose Run. In the field that appears, enter F:\XXX\Setup.exe (if “F” is the letter of.
Wimba Presenters Guide North Dakota University System 2009.
SIGNZ V3.39 Centre Proposals SIGNZ V3.39 Centre Proposals.
Lesson 11: Looking at Files and Folders what a file or folder is on the computer how to recognize a file or folder on the desktop how to recognize the.
Excel Electronic Membership Directions, Examples and Operational Hints. Created by: Jim Armbruster.
Introducing… Microsoft Windows VISTA Introducing… Microsoft Windows VISTA.
WEIGH STAR A Software for Weighing Systems. Features Weigh STAR is a S/W that is designed for weighing systems. It reads the weight (both Gross Weight.
FIX Eye FIX Eye Getting started: The guide EPAM Systems B2BITS.
 When you receive a new you will be shown a highlighted in yellow box where your can be found  To open your new just double click.
Compliance Assist Refresher Instruction Guide Adding or Editing Student Learning Outcomes.
1 Double Click to Edit. Installing Evernote 22 First, download the installation software. Open your favorite web browser and visit the Evernote Web site.
Instructions for Uploading Points and Photos for Linking Uploading GPS points requires the following: At each site or transect note stop, “mark” a GPS.
Installing SAS 1. Requirements If you do not have an old copy of SAS installed on your computer, go directly to Slide 6. Make sure you have uninstalled.
PRESERVING YOUR PAST AND YOUR PRESENT FOR THE FUTURE.
Online Catalog Tutorial. Introduction Welcome to the Online Catalog Tutorial. This is the place to find answers to all of your online shopping questions.
Getting Started with Word & Saving Guided Lesson.
Mapping local community assets online Read this if you want to learn how to: 1)Create online maps of local community assets using Google Maps 2)Allow other.
JDS5 Training Guide. On Start Up you will see this screen click the OK button Click OK.
Quick guide to ASIMON configuration For version 3.0 or greater SAFETY AT WORK Date: 3/18/2009.
Know your Operating System Thanks to Dina Sokol. An operating system is software (a computer program) that manages your computer.
Google Mail. Navigating Visit Sign in using your gmail address and password.
HOW TO INSTALL WINDOWS 7? This step-by-step guide demonstrates how to install Windows 7 Ultimate. The guide is similar for other versions of Windows 7.
Word and the Writing Process. To create a document 1.On the Start menu, point to Programs, and then click Microsoft Word. A new document opens in Normal.
POWERPOINT : GETTING STARTED WITH POWERPOINT 1.Ribbon: customize ribbon – right click on ribbon and customize ribbon opens 2.Quick access toolbar.
NIMAC for Accessible Media Producers: February 2013 NIMAC 2.0 for AMPs.
Sigma-Aldrich PT Portal
Setting up Categories, Grading Preferences and Entering Grades
Parts.cat.com Client training 2016.
Using Excel with Google Maps
Welcome to the Caterpillar Gas Engine
Digital Chart Recorder Operation
N3FJP Field Day Logger.
Digital Mapping Welcome to a short presentation on how to create a very basic event route using digital mapping. In this example, we will be using Quo.
Presentation transcript:

FAQ Frequent Asked Questions START

I have a TIER 2 combine (CX CX880, CR960-CR980) 5.When I put my data card in the combine’s data logger: DATACARD ERROR When I put my data card in the combine’s data logger: DATACARD ERROR How must I work in Advanced Mode, how to perform a Calibration of Yield/moisture sensor? 3.How must I work in Advanced Mode, how to perform a Calibration of Yield/moisture sensor? 1.Why should I install the new FF2PC software (Farm/Field to PC) on my combine? 1.Why should I install the new FF2PC software (Farm/Field to PC) on my combine? 4.I loose regularly EGNOS D-GPS signal on my NH100, NH110 or NH134? 4.I loose regularly EGNOS D-GPS signal on my NH100, NH110 or NH134? 2.How must I work in Basic Mode, how to perform a Calibration of Yield/moisture sensor? 2.How must I work in Basic Mode, how to perform a Calibration of Yield/moisture sensor?

1.Why should I install the new FF2PC software (Farm/Field to PC) on my combine? The new Farm/Field To PC software has been developed for CX and CR combines who are equipped with the black and white INFOVIEW monitor. Two groups of customers will benefit from this new software. 1.The first group owns a combine with Yield sensor and moisture sensor. 2.The second group has a Yield monitor and moisture sensor and the Data logger or the D-GPS equipment. The new FF2PC-software makes navigating and input of data much easier and customer friendly. The new FF2PC-software can be configured in a BASIC mode for the first group and in ADVANCED mode for the second group of customers. The original Operator Manual stays valid.

What is new in FF2PC? Basic mode: for customers who do not use datalogger or D-GPS in general they want to attribute only a Field name and a Crop name, they do not want to be forced to introduce a Farm name. Advance mode: for customers who use datalogger or D-GPS equipment they want to upload the full management tree from the PC- desktop and then select in a fast and easy way the Farm/Field/Crop. Automatic generation of intelligent names. When a new Farm or Field is created the monitor proposes an IntelliName. An IntelliName is composed out of the Date plus a sequence number: example 07/06/25-GHI. This system is the same for Farm, Field and Load. (We strongly recommend to accept the default name for the load except if you perform a yield or moisture calibration) If you do not agree with the IntelliName, click enter, the default name is now highlighted: Navigation and Editing is made easy and fast. –If you start writing the IntelliName will be over-written immediately. –If you click Right arrow ► the cursor will move to the end of the field, you can then delete from the back example 07/06/ –If you click Left arrow ◄ the cursor will move to the beginning of the field. –If you click Up arrow▲: navigate to the field above. –If you click Down arrow▼ navigate to the field below. –Crop names are editable. –Maximum memory in basic version is 13 fields (with in total 14 loads) –Maximum memory in advance version is 50 Farms with max 350 Fields and with maximum 1200 loads. –Easy calibration for Moisture sensor and Yield sensor. 1.Why should I install the new FF2PC software (Farm/Field to PC) on my combine?

Please take contact with your NH dealer. 1.How Can I install the new FF2PC software (Farm/Field to PC) on my combine?

2.FF2PC-software in BASIC mode. How to set BASIC mode? In the “Set-up screen, Set Flow sensor to “1” (if you have one, if not “0”) Moisture sensor type: “1” (if you have one, if not “0”) Datalogger type to “0” DGPS unit type to “0” How to work in BASIC mode? Your current Operators Manual remains fully valid. All operations remain unchanged but the screen to select a new field is simplified: Just select the cell: Field and click “Enter”, Now select “New” and an IntelliName will be proposed. If you agree just click the arrow ▼ and select the correct Crop and start combining. You don’t need to select a load (the machine will do that for you when you engage the threshing system, a pop-up will communicate the name of the load) Conclusion: It takes you only few clicks to create a new Field (It was much more clicks in the past) If you want to alter the name of the Field: click “Enter” and start typing, the proposed IntelliName will be overwritten and you can start immediately writing your preferred name. You can also use the navigation buttons ◄► to edit a part of the IntelliName. If you do not Create a load, the Machine will do it for you The only selection to be made: Field name. The machine proposes an IntelliName Example: In Basic version: A field called “River”. The crop is “Corn”. A load must NOT be selected, the machine will do that for you. Select “New” and the machine will propose you an IntelliName Basic mode = Data logger type= 0

How to calibrate Moisture and Yield sensor in BASIC mode? Only to be done if your combine is equipped with Moisture sensor and Yield sensor. In the Active field mode Select the correct Field or create a new Field. Select the correct crop. Rename the IntelliName for the “Load”. A good practice is to give it the special name “Date-Cal”. Start combining and harvest up to 3 full grain tanks (or min 15 ton). When done take a small representative sample for your moisture sensor calibration and send the load to the weigh bridge. While the trailers are being weighted, harvest the remainder of the field under a DIFFERENT load name example “07/07/06-GV2”. When the results from the weigh bridge is known, go to the screen and select Flow sensor. In the screen select now the Field and the special load “Date-Cal”. In the cell fill in the result from the weigh bridge. Click then on the cell “Calibrate now”, a message “calibration successful “ will appear on the screen. Remark: The calibration of the Yield sensor needs to be done only ONCE in a season. The calibration of the moisture sensor needs to be done for every CROP. A moisture sensor calibration takes only 2 minutes. The procedure for Moisture sensor calibration is completely similar as for the Yield sensor. The sample that you took can be measured with a hand- moisture tester or it can be mentioned on the weigh bridge report. Fill the result From the weigh bridge Click to calibrate Create a special load: “Cal” and combine 15 Tonne. The remainder of the field Must be harvested under a DIFFERENT load name. Select the sensor you want to calibrate 2.FF2PC-software in BASIC mode. Cont.

How to set ADVANCED mode? In the “Set-up screen, Set Flow sensor to “1” (if you have one, if not “0”) Moisture sensor type: “1” (if you have one, if not “0”) Data logger type to “2” DGPS unit type to “1” (if you have one, if not “0”) When your combine is equipped with Yield monitor and Data Logger there are 2 major advantages of working in the advanced mode: 1.You can upload your management tree (Farms and Fields) in advanced into the combine. This makes that you win valuable time in the field because you only have to select the correct Farm and Field from a drop down box. 2.You can also download the combine data: Farm, Fields, Area (Ha), Ha/h, Total Yield (Wet and dry), Yield/h (Wet and dry), Moisture %. These data can than be processed in the PFS software. This PFS software allows you to manage your data, make reports of the fields and the farms, draw statistical results about yields and so on. If your combine is equipped with a D-GPS antenna or an EZ-Guide plus, then you can create field maps but also create variable rate export files. If you have only a Data logger you can create similar reports from your fields 2 = Advanced mode, Data logger is obligatory “1” = if you have a D-GPS antenna (if not select “0”) If you have only a Data logger you can create similar charts from your fields If you have a Data logger and a D-GPS antenna (or an EZ-GUIDE) then you can create yield maps from your fields. Also variable rate fertiliser, spreader and planting maps can be exported. 3.FF2PC-software in AVANCED mode. Cont.

How to work in ADVANCED mode? Your current Operators Manual remains fully valid. All operations remain unchanged but the screen to select a new Farms and Field is simplified. The possibility of uploading your management tree that you created in your Precision Framing desktop software will now result in the fact that the driver of the combine will win a lot of time because he does not need to fill in names, just select them from a drop down list: Farm & Field. You can upload 50 Farms and 350 Fields. Remark: If you are on a new Farm or new Field that has not been created in the management tree, you can simply add it by selecting the cell Farm or Field and click “Enter”, Now select “New” and a new IntelliName will be proposed. If you agree just click the arrow ▼ and select the correct Crop and start combining. You don’t need to select a load (the machine will do that for you when you engage the threshing system, a pop-up will communicate the name of the load). Conclusion: It takes you only few clicks to select a Farm & Field & Crop (It was much more clicks in the past). If you want to alter the name of the Farm or Field: select the cell, click “Enter” and start typing, the proposed IntelliName will be overwritten and you can start immediately writing your preferred name. You can also use the navigation buttons ◄► to edit the IntelliName. While combining you can encounter stones or water- or insect-damage etc. in the field: these observations can also be logged. The list and the order of the list is fully customisable. If you push the numbers 1, 3, 4 during combining the system will log “Insects”, “Weed”, “Rock”. To stop logging push the above numbers again. A list of all the farms is Preloaded (from the PFS software). Just select the Farm you are on. Just like the Farms also all the fields are preloaded, Just make the correct selection. Key’s Quick selection For markers Three markers are logged Cont. 3.FF2PC-software in AVANCED mode.

How to calibrate Moisture and Yield sensor in ADVANCED mode? As your combine is equipped with Moisture sensor and Yield sensor it is needed to do some calibrations. In the Active field mode Select the correct Farm & Field (or create them). Select the correct crop. Rename the IntelliName for the “Load”. A good practice is to give it the special name “Date-Cal”. Start combining and harvest up to 3 full grain tanks (or min 15 ton). When done take a small sample for your moisture sensor calibration and send the load to the weigh bridge. While the trailers are being weighted, harvest the remainder of the field under a DIFFERENT load name example “07/07/06-GVF”. When the results from the weigh bridge are known go to the screen and select Flow sensor. In the screen select now the Farm & Field & Crop and the special load “Date-Cal”. In the cell fill in the result from the weigh bridge. Click then on the cell “Calibrate now”, a message “calibration successful “ will appear on the screen. Remark: The calibration of the Yield sensor needs to be done only ONCE in a season. Although in the above procedure you have to select “Crop” the calibration value is valid for ALL crops. The calibration of the moisture sensor needs to be done for every CROP. A moisture sensor calibration takes only 2 minutes. The procedure for Moisture sensor calibration is completely similar as for the Yield sensor. The sample that you took can be measured with a hand- moisture tester or it can be mentioned on the weigh bridge report. Fill the result From the weigh bridge Click to calibrate Create a special load: “Cal” and combine 15 Tonne. The remainder of the field Must be harvested under a DIFFERENT load name. Cont. 3.FF2PC-software in AVANCED mode.

4.I loose regularly my EGNOS D-GPS signal. What is EGNOS? EGNOS is a joint project of the European Space Agency (ESA), the European Commission (EC) and Eurocontrol, the European Organisation for the Safety of Air Navigation. The Ag-business can use the Egnos signal for differential correction. The European Geostationary Navigation Overlay Service (EGNOS) can change and improve the correction signal as required. Therefore also New Holland need to change the software in it’s antenna’s. The new software performs ever better and better. Do you want to take profit of the new Antenna software for your NH100, NH110 or NH134? Please call your dealer or your PLM-support company. 29/7/2007

When I put my data card in the combine’s data logger: DATACARD ERROR Capacity: best take what the computer proposes: 2. File System: Choose FAT or FAT16 3. Allocation unit size: Default allocation size 4. Volume label: Name of the combine 5. Check: Quick Format 6 When the combine shows on the InfoView monitor DATA CARD ERROR 1004 that means that your datacard has been formatted in the wrong File System: The correct file system is FAT or FAT16. To correct this problem you need to reformat the datacard with the Windows Explorer: Click right mouse on the Datacard and select FORMAT. Cause: wrong format