1

Technology PROJECT OUTLINE Situation Mobile phones and their related products are becoming one of the biggest growing industries of today. Most people own a mobile phone and use them daily. It has revolutionised the telecommunications industry. The intended market for mobile phones and their related products now seem to be targeting the younger aged customer. Task As a product designer it is your task to design and manufacture a holder for a mobile phone aimed at the teenage market. Not only will this product hold the mobile phone it will also emit a small amount of light to show the phones location at night when it’s dark. You will use a low level light source in the form of a light emitting diode (LED), in a simple circuit and fluorescent acrylic to maximise the small light source. Page 2

Technology Measurement It is important that the mobile phone fits into the holder correctly in order to fulfil it’s intended function. Therefore you need to make sure you know the dimensions of the phone you will be making the holder for. Task Using correct techniques shown to you by your subject tutor please mark on the correct dimensions for the overall length, width and thickness of your mobile phone. Show this on the drawing above. Scale: Mark on the drawing the actual dimensions is to show the measurement as a scale of 1: 1.What do you think the scale of 1:2 means? Therefore what does a scale of 2:1 mean? Show the correct measurements for the following: a)200 x 400 at a scale of 2:1 = 400 x 800 b)100 x 200 at a scale of 1:2 = 50 x 100 c)300 x 200 at a scale of 1:2 = d)500 x 1000 at a scale of 1:4 = e)25 x 60 at a scale of 4:1 = It is important that you remember the ratios the correct way round. Try writing them as fractions to help you when you are working with scale Page 3 Date:

Technology Product Analysis – Part 1 Product Analysis Department of Technology Lord Grey school Manufactured ProductName of Product: Function/Application: Intended Market: How the product works including any scientific principles: Constituent Parts Part No. Description of part MaterialManufacturing Process/Method of Construction Page 4 Date:

Technology Product Analysis – Part 2 The design is successful/unsuccessful: Student response: Level Effort Level: Effort: Date: The quality of the manufacturing process is of a high/medium/low standard: Economic issues:Moral issues: Ergonomics: Environmental issues: Page 5 Date:

Technology Specification Now we have the correct sizes of your mobile phone, we need to look at what we will actually make. We are going to change the basic shapes of some of the parts to make them look better, but before we can do this, we need to write out a specification. A specification gives us guidance as to what we are expecting when the item will be finished. It is normally based on your research and general knowledge. It is a list that once produced, we must stick to. We will return to it at the end of our project. Mind-map some of the topics and issues that you think will need to cover in your specification Topic/ Issue What? (does it need to do) Why? (does it need to do this) 1 2 Specification Target audience: Who is it aimed at? Page 6 Date:

Technology Student response: Level Effort Page 7 Date:

Technology Design Ideas To design the florescent phone holder section you will receive one strip of acrylic measuring 220m x 50mm x 3mm which will be bent into shape. In the space below sketch some ideas of your own for the shape of the phone holder: Page 8 Date:

Technology Page 9 Student response: Level Effort Date: Card Model Date: Evaluation of card model:

Technology Page 10 CHOSEN DESIGN Top Bottom 3D DRAWING OF FINAL DESIGN Date:

Technology Page 11 2D DESIGN- DRAWING OF FINAL DESIGN Date:

Technology Page 12 Booklet Presentation/Written work Tick the statement that you feel you have achieved ExcellentGoodSatisfactoryPoorVery poor Booklet Presentation/Graphic skills Tick the statement that you feel you have achieved ExcellentGoodSatisfactoryPoorVery poor In the space below write a short statement explaining what you think you need to do to improve your presentation: Practical Outcome Tick the statement that you feel you have achieved ExcellentGoodSatisfactoryPoorVery poor In the space below write a short statement explaining what you think you need to do to improve this aspect of your project: Interim Self Assessment/Progress Sheet

Technology START FINISH Page 13 Date:

Technology Page 14 Student response: Level Effort FINAL PRODUCT Date:

Technology Evaluation Answer the following questions to complete your final evaluation Plastic holder Electronic circuit Wood box 1. Does your final product meet all the criteria of the specification you produced? 2. What are you particularly pleased with in the manufacture of your product? 3. What did you find most difficult in the manufacture of your product? 4. How do you think your final product compares to existing products already on the market? 5. How could you improve your product? Student response: Level Effort Page 15 Date:

Technology Page HOMEWORK - Storyboard

Technology Page 17 HOMEWORK- Thermoplastics and Thermosetting Plastics Write down a description of thermoplastics and thermosetting plastics and draw a diagram for each. Thermosetting Plastics Draw a picture showing how the monomers are linked. Thermoplastics Draw a picture showing how the monomers are linked.

Technology Page 18 HOMEWORK - Types of Plastic and their uses Thermosetting Plastics Thermoplastic Name & DescriptionUses Name & DescriptionUses Date:

Technology Page 19 HOMEWORK – Electronics 1.What does LED stand for? 2.What are the advantages of using LEDs? 3.What are resistors used for? 4.Draw the circuit diagram symbol for: 5.What do the coloured stripes on a resistor tell you? 6.What is the name given to all the pieces that are soldered onto a circuit board? LED C 9V Battery ResistorPush to Make switch Date:

Technology Page 20 HOMEWORK – Promotion In the space below design a poster promoting the sale of your mobile phone holder. Remember to keep it bold and brightly coloured. It is also important to demonstrate the fact that it lights up. Date:

Technology Page 21 HOMEWORK – Flexi CAD In the space below stick in your Flexi –CAD design. Date:

22

Teacher Assessment/Target Record TopicEnd Level Teacher Class Work Behaviour Homework Student Assessment/Target Record Class Work Behaviour Homework End Level Justification Peer Assessment/Target Record Class Work Behaviour Date:

Lord Grey School Creative Technologies YEAR 8 WORK BOOKLET PRODUCT DESIGN (B) ELECTRONIC MOBILE PHONE HOLDER Name: Tutor Group:Technology Class: Working at Grade: (This is your grade at the start of the term) Target Grade: (This is your end of course MTG)