Welcome to Educandi Aiolos Configuration The education starts at 13.00

Todays schedule Create new series Connect series in tree view Connect weather to series (and multiple weather) – Brake – Create and connect models to series (and multiple models) Create series with fraction numbers and dynamic fractions Configure alarm level to get warnings for in-data problems Set or edit fraction numbers and dynamic fractions Connect import and export protocol to series – Brake – 16.00Questions and discussions

Configuration in Aiolos Forecast Studio Create new series To create a new series, push in properties window and series a name and connect import, export, model and weather and other settings. To copy already existing series, push and give the series the name you want to have and then if you need change model or import, export or other settings.

Configuration in Aiolos Forecast Studio Connect series in tree view Connect using button Select the aggregated series in the series tree “Series” to which you want the load series be connected to. Then select the load series in the “ForecastSeries” grid and then push the button for connect with 100%. Drag and drop to connect one series in tree Hold down Ctrl + Q and with the mouse pointer drag the selected series in grid and release it into the aggregated series you want to connect it to! Drag and drop several series at the same time Hold down Ctrl and select all the series in the grid you want to connect and then Ctrl + Q to drag and drop to aggregated series.

Configuration in Aiolos Forecast Studio Connect weather to series (and multiple weather) In properties window you can select in “Weather station” list box what weather you want to connect to each series. If you are using the multiple weather module you can select weather for weather station 2 – 5 To set weights for weather you have to go over to “Follow Up” tab and right click the series you want to set weight for. Then a window opens and where you can add weights between all weather suppliers.

Configuration in Aiolos Forecast Studio Create and connect models (alternative models) to series All forecast series have to have a model connected to the series and you can choose to create a new model or use a already existing model to connect to the series. In the properties window you can select in the “Model” list box which model you want to connect to each series. If you are using the alternative models you can select models for model position 2 – 8 (in this case given an unique name for each model position) You can configure your own name of model position 2 – 8, and that is configured in the Texts tab.

Configuration in Aiolos Forecast Studio Create series with fraction numbers and dynamic fractions Select the aggregated series in the series tree “Series” to which you want the load series be connected to. Then select the load series in the “ForecastSeries” grid and then push the button for connect with fraction number. Then save the settings by right-click on the series and push Save. Then open edit fraction window by pushing the button and set fraction numbers and periods. To connect dynamic fraction to series push instead the button The settings for dynamic fraction is made in “Follow Up” tab, and right click the selected series and select “Sum dynamically” and then in the aggregated series (top level) you set fraction numbers. This function is planed to move over to CONFIG tab in later release.

Configuration in Aiolos Forecast Studio Configure alarm level to get warnings for in data problem For each model you can set alarm levels for warnings of in-data. Select the model you want to set alarm levels for and in the properties window you can se the section “Check data requirements” where you make the settings. If the fields is empty or have the value -999 there is no check of in data at all. Normal settings can look like the settings in the picture, depending of length of weather forecast and start date.

Configuration in Aiolos Forecast Studio Set or edit fraction numbers and dynamic fractions Select the series you want to edit fraction number for and open edit fraction window by push the button and set fraction numbers and periods. To set dynamic fractions number (the series have to be connected without fraction numbers with button ) Then go over to “Follow Up” tab and right click the selected series and select “Sum dynamically”. Then in the aggregated series (top level for the selected series) you right click and select “Dynamic fraction“ and set fraction numbers.

Configuration in Aiolos Forecast Studio Connect import and export protocol to series Select the series in the grid that you want to connect an import/export protocol to. In properties window in section “Load Import” or “Load Export” you can select in the list-control what import/export you want to connect to the series. You can also select import/export protocol in the grid by clicking the arrow in the cell for column “LoadImport” or “LoadExport”.