Charge Measurement Using Commercial Devices Jinyuan Wu, Zonghan Shi For CKM Collaboration. Jan. 2003

Introduction PMT Q AD6644 FPGA Integrator HP1662C

AD6644 FPGA Integrator(1) AD8055 Input Pulse EPC2LC20 Integrator (2) OPA660 To Analyzer The Circuit Board Optical receiver SLC-25-4 Transceiver TLK1501

All test equipments

Outline AD6644. Integrator circuit (1). ADC output. Optical Transmission. Integrator circuit (2).

Commercial ADC: AD6644 The AD6644 is a high speed, high- performance, monolithic 14-bit analog- to-digital converter. Current FPGA technology is used in our tests. The sample rate in our tests is 35 MHz or the sample time is 28.5ns. The guaranteed sample rate is 65 MSPS.

Integrator for ADC [1] +2.5V GND Input Pulse 100pf 36.5k _ + AD OUTPUT The output will send to AD6644 as a input signal. It is a traditional integrator. T=RC=36.5k x 100pf=3.65us=128 x 28.5ns

Input Pulse Output

Input Pulse Output

Digital Process of AD6644 Output Using FPGA hardware to find charge. ADCADCQ SUB ABS OR AND Higher Bits DIFF D D Simple Zero Suppression Algorithm = Charge

DIFF = Charge ADCQ Data from HP 1662C Logic Analyzer

ADCQ

Charge

The Stability of AD D ABS EN R (RESULT) SUB D D (DATA FROM AD6644)  Above circuit is used to produce the mean of absolute difference. DC input is sent to AD6644.

Data From HP 1662C Logic Analyzer Result ADCQ

The Mean of Absolute Difference

ADCQ ADC Output of DC Input

Standard Deviation

Optical Transmission The ADC test board has same interface as the QIE test board. Data have been successfully transmitted to Lab 6 station. A simpler test station is being built at WH14W.

DATA PROCESS BY USING DATA FROM LAB_6

Integrator for ADC [2] GND Input Pulse GND GND OUTPUT 100pf 36.5k 5V OPA660 Operational Amplifier & Buffer +1 Similar as Ken Nelson’s design except the omission of the reset circuits.

Input Pulse Output

Input Pulse Output

Thanks END

Input Pulse Output Integrator (1)

Input pulse Output Integrator (2)