WP7 - Small scale mockup Status 3rd Review Meeting Cartif-Brussels 17/12/2014 Gorenje d.d., Sašo Vinkovič, Mihael Bračko

Submitted deliverables  D7.1 - Report on mockup installation [M15] ◦ Report on mockup installation: A document containing the list of all working components and their assembling peculiarities, includes a list of part that needed to be re-considered accompanied with the motivations and changes done.  D7.2 - Report on options validation [M20] ◦ Report on options validation: An analysis of the options considered in T7.2 on the light od the carried out experiments.  D7.3 - Report on validated communication protocols and interfaces boards [M23] ◦ Report on validated communication protocols and interfaces boards: Document containing the validation methodology and the corresponding results.

Forthcoming deliverables  D7.4 - Library of recipes and templates of basic scenarios ◦ Library of recipes and templates of basic scenarios: A software library containing a list of developed recipes for different scenarios  D7.5 - Report on collected data with corresponding analysis ◦ Report on collected data with corresponding analysis: A detailed document containing all the collected data accompanied by all the analysis e performances accomplished  D7.6 – Report on all the stress tests ◦ Report on all the stress tests: A detailed document on all the stress-tests done accompanied by a complete description on where/when the system maintained its usability and where/when not

WP7 Timeline & Deadlines Project year YEAR 1YEAR 2YEAR 3 Project month Year Month WP7 T7.1 T7.2 T7.3 T7.4 T7.5 D7.1 R D7.2 R D7.3 R D7.4 R D7.5 R D7.6 R MS 6 R MS 8 R Today

Testing the non branded solution  Before the appliances were sent to Cartif, both, the branded solution and the non branded solution were extensively tested in our laboratories.  The correctness of communication was extensively tested over the mockup‘s web page. A sequence of requests was sent to the web site, each time the response was observed if comply with our expectations.  After initial problems, a high level of correct responses was achieved.

Testing the branded solution  The correctness and speed of communication tests for the branded solution (refrigerator) were performed, using a branded solution home server and it‘s implemented web methods.  A series of tests for different commands were performed, each time with some hundreds of repeats.  Results are comparable with the results, that were obtained in our laboratories.  The response time is a little bit longer.

Real world scenarios and recipes  A set of real world scenarios is being built.  One of them will base on the „two days in real life“ experiment, which is described in D7.3. and will take place shortly  Working on a collection of basic recipes, derived from a set of real world sample scenarios.  Basic recipes represents an entry set for the Social&Smart facility, where basic recipes will be refined and optimized.  Afterwards a library of optimized recipes will be established as a basis for further investigation.

Sample: savings with refrigerator (1)  Scenario: during the low energy price period (from 10pm to 6am), a lower temperature should be set for the freezing compartment, to store the energy. During the higher energy price period the temperature should raise.  recipe: ◦ 10pm start the SuperFreeze mode (around -35°C) ◦ 6am stop the SuperFreeze mode (and operate between -24°C and -16°C)  web service calls (.NET methods): ◦ HRCommand("set", "G87C952FDX", "SUPERFREEZE_PROFILE", "ON"); ◦ HRCommand("set", "G87C952FDX", "SUPERFREEZE_PROFILE", "OFF");

Sample: savings with refrigerator (2)  Derived XML structure: (according to the D7.3) Refrigerator Gorenje G87C952FDX super_freeze RW 22:00 ON wait RW 480 super_freeze RW OFF

Thank you!