LESSON ONE CYLINDERS & CRANKCASE.

Slides:



Advertisements
Similar presentations
Parts of I.C engine Cylinder Piston Connecting rod
Advertisements

Tie rods or Tie bolts To understand the role played by tie rods, it is necessary to appreciate what is happening inside the cylinder of the engine. When.
Engine Construction & Principles of Operation page 63
Lesson 31 Main Engine Repair (II).  1. Crankpin bearing overhaul  2. Fuel pump removal & re-installation  3. Cylinder head removal/replacement  4.
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Cylinder and Crankcase
Four-Stroke Engine Basics
Automotive Engines Part 2 (Block ).
Stuffing box The crankcase is separated from the cylinder and scavenge space in a two stroke crosshead engine by a diaphragm plate. Hence a provision can.
Small Engine Theory What is the purpose of a Small Engine?
Diesel Engine Components
PISTON ENGINES Part 1 Introduction.
Two Stroke The biggest diesel engine in operation, work on two stroke principle. It is called two stroke because it takes two strokes of piston to complete.
CYLINDER HEADS AND VALVES
CHAPTER 3 INTERNAL COMBUSTION ENGINES
Internal Combustion Engines – The Diesel
Small Engines.
Build Basic Knowledge of Internal Combustion Engines (I.C.E)
Piston The piston comprises of two pieces, the crown and skirt. The crown is subjected to high temperatures in the combustion space and is liable to be.
Mechanical Arrangement
Internal combustion engine
Systems of the Engine.
Diesel Engine 4 Stroke Cycle model
Exhaust valve Exhaust valves open inwards into the cylinder, so that the gas pressure in the cylinder will ensure positive closure and help in dislodging.
Small Engines The identification and operating process of four-cycle and two-cycle small engines Mr. Alan Ford.
Fuel oil system Lubrication Cooling.
LESSON THREE CONNECTING RODS. 1.DEFINITION * A running component connecting the crankshaft to the piston ( in trunk piston engines ) or to the crosshead.
@ Perkins Proprietary Information of Perkins Engines Company Ltd., © 2000.
Internal Combustion Engines – The Diesel References Required Principles of Naval Engineering – (pP ) Optional Introduction to Naval Engineering.
Two Stroke Crosshead Diesel Engine
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
DIESEL ENGINE ENGINE DEVELOPMENT DIRECTORATE
Marine Engine Systems Merchant Marine Training Centre.
Four-Stroke Engine Basics
Engine Construction Stationary Parts 2 s/c Slow Speed BEDPLATE LUBE OIL SUMP A FRAME CYLINDER BLOCK JACKET WATER CYLINDER LINER CYLINDER HEAD INTAKE PORTS.
CYLINDER HEADS AND VALVES. 1.DEFINITION  Cylinder head is a casting that covers the top of a cylinder.
Bedplate The bedplate is foundation on which the crosshead diesel engine is built. It must be rigid enough to support the weight of the rest of the engine.
Engine Construction and Principles of Operation
Components of 4-stroke Engine Created by:- Prashanth Nair Sawan Makwana Jigar Chauhan Harshil Gohel Saumil Joshi.
Crosshead Crosshead pin connects piston to the connecting rod. On either side of the crosshead pins are mounted the crosshead slippers (or shoes). The.
ENGR 100 Engine Dissection Project Information. Engine Dissection Project 3.5 HP single cylinder, 4 cycle engine, made by Briggs and Stratton in Milwaukee,
Essential reading: SPINČIĆ, A., PRITCHARD, B, An English Textbook For Marine Engineers 2, Pomorski fakultet, Rijeka LUZER, J., SPINČIĆ, A., Gramatička.
Internal combustion engine
Diesel Engine Power Plant Prepared By: Nimesh Gajjar
Lesson Five Bulkheads and Pillars.
Entablature Entablature is the name given to the cylinder block, which incorporates the scavenge air space and the cooling water space. It forms the housing.
CYLINDER LINERS LESSON FOUR. 1.LINER DEFINITION A removable component, cylindrical in shape, inserted into the engine block. It can be replaced when worn.
Introduction to the Engine
Moment Connection Requires Bolts Outside the Flanges
Aaron’s Engine Anatomy
Holding Down and Chocking The engine must be securely fixed to the ship. For this the engine is mounted on resin or cast iron chocks and bolted to the.
Ag Science and Tech Small Gas Engines.
The piston is connected to a crankshaft that converts the up and down motion to a rotary motion, which powers the implement. crankshaft:
CYLINDER LINERS.
Connecting rods LESSON THREE.
CYLINDER HEADS AND VALVES. 1.DEFINITION  Cylinder head is a casting that covers the top of a cylinder.
1 Engine Construction. 2  Gasoline engines transform chemical energy of burning fuel into mechanical energy.  A gasoline engine is an internal combustion.
Objectives Explain the basic function of an internal combustion engine. Describe the five events required for internal combustion engine operation. Describe.
11 Chapter Engine Fundamentals. 11 Chapter Engine Fundamentals.
Diesel Engine Components
The 2 Stroke Diesel Cycle. It may surprise you to learn that the biggest diesel engines in use operate on the two stroke principle. If you have experience.
Engine Lubrication Systems
Internal Combustion Engines – The Diesel
Presented by:- ARAVIND P V MS S5 NO:-60
Back Next.
Introduction to Engine Parts, Operation and Function
Diesel Engine 4 Stroke Cycle model
A-Frames A-frames carry the guides and support the entablature (cylinder block). On older engines, A-frames were individually erected on the bedplate directly.
Diesel Engine Components
Back Next.
Presentation transcript:

LESSON ONE CYLINDERS & CRANKCASE

THE DEFINITION OF A FRAME The engine load carrying part that includes: cylinder block

ENTABLATURE name given to the cylinder block which incorporates the scavenge air space and the cooling water spaces

STUFFING BOX prevents lube oil from from being drawn up into the scavenge air space

THE DEFINITION OF A FRAME The engine load carrying part that includes: cylinder block crankcase bedplate or base

THE DEFINITION OF A FRAME The engine load carrying part that includes: cylinder block crankcase bedplate or base sump or oil pan end plates

THE DEFINITION OF A FRAME The engine load carrying part that includes: cylinder block crankcase bedplate or base sump or oil pan end plates 2. THE DEFINITION OF A CYLINDER BLOCK A cast iron casing which encloses / houses cylinder liners & supports heads.The heads are tightly secured by studs and nuts to the cylinder block

3. THE DEFINITION OF A CRANKCASE The crankcase is a housing for the crankshaft and provides space for its rotation.

3. THE DEFINITION OF A CRANKCASE The crankcase is a housing for the crankshaft and provides space for its rotation. 3.1 MATERIAL cast steel cast steel & welded steel plates

3. THE DEFINITION OF A CRANKCASE The crankcase is a housing for the crankshaft and provides space for its rotation. 3.1 MATERIAL cast steel cast steel & welded steel plates 3.2 LOCATION A column or frame, mounted on the bedplate, forms the engine crankcase.

3. THE DEFINITION OF A CRANKCASE 3.3 CONNECTION Bedplate to frames-by steel tie rods / long tie bolt Cylinder covers to cylinder liners-by strong studs anchored in the cylinder block ( M.A.N. )

3.4 CRANKCASE EXPLOSION 3.4.1 Causes Oil droplets are formed by oil splashing from the bearings mix with air.This mixture does not readily burn or explode unless there are overheated parts within the crankcase & presence of fuel oil.

3.4 CRANKCASE EXPLOSION 3.4.1 Causes Oil droplets are formed by oil splashing from the bearings mix with air.This mixture does not readily burn or explode unless there are overheated parts within the crankcase & presence of fuel oil. 3.4.2 Prevention Proper maintenance, correct lubrication, cleanliness.

Proper maintenance, correct lubrication, cleanliness. 3.4 CRANKCASE EXPLOSION 3.4.1 Causes Oil droplets are formed by oil splashing from the bearings mix with air.This mixture does not readily burn or explode unless there are overheated parts within the crankcase & presence of fuel oil. 3.4.2 Prevention Proper maintenance, correct lubrication, cleanliness. 3.4.3 Safety arrangements Crankcase explosion relief valves; Inert gas flooding system; Crankcase mist detector

3.4.4 Consequences Minor explosion, flames, pressure shock wave ( ruptures crankcase doors ) Major explosion – widespread damage 3.4.5 Actions Stop engine until it cools down.

4. BEDPLATE OR BASE 4.1 DEFINITION Main strength part providing rigid support for the main bearings and crankshaft.

4. BEDPLATE OR BASE 4.1 DEFINITION Main strength part providing rigid support for the main bearings and crankshaft. 4.2 STRUCTURE longitudinal box structures with stiffening members and webs transverse members or girders

4. BEDPLATE OR BASE 4.3 STRESSES Heavy stresses in operation While supporting the main bearings and bolts 4.4 FUNCTION to support the frame and all working parts to collect crankcase lubricating oil and return it to the sump / draining tank

5. TIE BOLTS - long tie bolts are fitted through the bedplate, frames and entablature to hold these three components in compression and to transmit the firing forces back to the bedplate - tightened hydraulically - positioned as close to the center of crankshaft as possible to prevent excessive bending moments

VERB + NOUN COLLOCATIONS loosen ease off BOLT slacken remove (un)tighten release

EXPRESSION the bolt chatters the bolt fits tightly the bolt has been pinned the bolt has been renewed the bolts has been retightened the bolt is rusted through the bolt is stuck the bolt works loose

EXPRESSIONS the bolt chatters – svornjak klepeće the bolt fits tightly – svornjak tijesno naliježe the bolt has been pinned – svornjak je osiguran the bolt has been renewed – svornjak je promijenjen the bolts has been retightened – svornjak je ponovno pritegnut the bolt is rusted through – svornjak je prohrđao the bolt is stuck – svornjak se ne može odvrnuti the bolt works loose – svornjak popušta sam