Higher Human Biology Human genomics

Learning Intention: To learn about the Human genome Success Criteria: By the end of the lesson I should be able to I can state that the sequence of bases can be determined for individual genes and entire genomes. I can state what bioinformatics is used for. I can state that personalised medicine would be based on an individual’s genome and could be used to identify potential risks of disease. I can state that pharmacogenetics involves the use of genome info in the development of effective drugs.

What is the Human Genome? Definition:Genome Definition: Genome – the whole hereditary information of an organism that is encoded in the DNA.

Human Genomics Human genomics is the study of the human genome It involves determining the sequence of the nucleotide base molecules along the DNA The sequence of bases can be determined for individual genes and entire genomes Entire genomes can be compared using single nucleotide polymorphisms (SNPs)

Main aims of the project: identifyTo identify the approximate 100,000 geneshuman DNA. genes in the human DNA. Determine the sequences baseshuman DNA.Determine the sequences of the 3 billion bases that make up human DNA. 14 Apr 2003 – The finished human genome What was the Human Genome Project?

Bioinformatics Is the use of computer technology to identify DNA sequences The enormous amount of data produced by DNA and protein sequencing can be managed and analysed using computer technology and shared over the internet

Computer programs can be used to identify –Gene sequences by looking for coding sequences similar to know genes –Start sequences (there is a good chance that each of these will be followed by a coding sequence –Sequences lacking stop codons (a protein coding sequence is normally a very long chain of base triplets containing no stop codon except the one at its end

Computer programs can be used to search and identify base sequences to see if it matches a specific amino acid sequence already known to be typical of a certain protein This is useful in the world of medicine

Systematics Is the study of a group of living things with respect to their diversity, relatedness and classification It compares human genome sequence data and genomes of other species to provide information on evolutionary relationships and origins

Personalised Medicine Personalized medicine is the ability to determine an individual's unique molecular characteristics and to use those genetic distinctions to diagnose more finely an individual's disease, select treatments that increase the chances of a successful outcome and reduce possible adverse reactions. Personalized medicine also makes it possible to predict an individual's susceptibility to diseases and enables steps to be taken that may help avoid or reduce the extent to which an individual will experience a disease.

Personalised Medicine-The future

The nature of disease is very complex and depends on both genetic and environmental factors for expression

Pharmacogenetics Pharmacogenetics is the study of how people's genetic makeup affects their responses to drugs. If a drug is known to produce side effects in some people, pharmacogenetic testing may help identify at-risk patients.

Rational drug design Drugs work by interacting with target molecules (receptors) in our bodies and altering their activities in a way that is beneficial to our health. In some cases, the effect of a drug is to stimulate the activity of its target (an agonist) while in other cases the drug blocks the activity of its target (an antagonist).

Once DNA sequencing has identified the the genes involved in a specific disease and established the structure of the protein expressed the Pharmacogenetisists try to synthesise a specific drug

The drug produced will –bind to proteins involved or –prevent their synthesis by binding to a specific region of the DNA preventing transcription of abnormal mRNA or –by binding to the abnormal mRNA preventing translation eg interfering RNA (RNAi)

Human genome - Summary Human genomics involves determining the sequence of the nucleotide base molecules along the DNA Bioinformatics is the use of computer technology to identify DNA sequences. Systematics compares human genome sequence data and genomes of other species to provide information on evolutionary relationships and origins. Personalised medicine is based on an individual’s genome. Analysis of an individual’s genome may lead to personalised medicine through understanding the genetic component of risk of disease.

Learning Intention: To learn about the Amplification and Detection of DNA Sequences Success Criteria: By the end of the lesson I should be able to State that Polymerase Chain Reaction (PCR) is used to amplify DNA sequences. Explain the detailed stages involved in carrying out PCR. State the applications of DNA profiling.

Polymerase Chain Reaction (PCR) minute quantitiesdrop of bloodcrime scenecell extinct dinosaur.PCR has made it possible to analyze and characterize DNA fragments found in minute quantities in places like a drop of blood at a crime scene or a cell from an extinct dinosaur.

The problem! Maisy the research meerkat is pregnant, but who’s the daddy? How can we find out?

A real problem for a real scientist Johanna Nielsen, a PhD student at the University of Edinburgh and the Institute of Zoology at the University of Cambridge What did she do?

She knew that DNA is the genetic material of living things Therefore the DNA sequence of the foetus would have greater similarity with the father than with a male meerkat who was not the father She had two candidate fathers and decided to compare the DNA from the foetus with that of the two possible fathers She decided to use DNA profiling (fingerprinting) techniques, which involve the use of the polymerase chain reaction, or PCR for short

Johanna knows that this section of DNA can be of different sizes between meerkats. She wants to compare the DNA at this site between the three samples. The DNA profiling technique: compares the size of DNA at a specific site between individuals DNA

Firstly, she needed to extract the DNA from each potential father and the foetus. What would she need to do to get a DNA sample?

By using PCR, Johanna can amplify this section of DNA many times. PCR is now fully automated, so Johanna just needs to put the DNA samples into separate tubes in the PCR machine, which is called a thermo cycler, along with a PCR ‘master mix’, which includes all of the ingredients the PCR reaction needs.

PCR uses the same mechanism for copying the DNA as our cells use for DNA replication. In pairs, remind yourselves of what happens during DNA replication. What is the main enzyme involved?

PCR uses the enzyme DNA polymerase to replicate or ‘amplify’ the DNA strand.

Step 1: DNA denatured Primers are used to start the replication process of just the section needed. Primers are short single strands of DNA that bond or ‘anneal’ to the sections of DNA on either side of the section of DNA that is wanted. The temperature is reduced for this step The DNA is heated to 94°C to denature the double helix so amplification can take place. Primers anneal Step 2: Primers anneal The polymerase chain reaction

DNA polymerase + Two strands of DNA are produced. Each piece of DNA consists of a template and a new strand, therefore the process is semi-conservative. Annealed primers Step 2: DNA is copied (Temperature is increased to 72°C)

And then start the three steps all over again!...but this time the amplified DNA is also used as a template... To give four...

This cycle is continued for 30–40 cycles. If there were 35 cycles from one template strand, how many copies would you have after the final cycle? (You might need your calculator!)

A lot! With just one template you would get 34,359,738,368 copies after 35 cycles.

You will usually start off with more than one DNA template from a DNA extraction. Why?

Each cell has a copy of the DNA and an extraction will be from many cells.

A recap cycles

Put the following steps involved in PCR into the correct order. DNA replication occurs using DNA polymerase. Primers introduced and temperature reduced to allow bonding. Temperature increased again to separate strands and the cycle begins again. Temperature increased to 95°C to separate strands. Double-stranded DNA produced, consisting of a template and a new strand of DNA. Draw an annotated diagram to accompany each stage.

Share your finished note with a partner and check the steps are in the correct sequence Temperature increased to 95°C to separate strands. Primers introduced and temperature reduced to allow bonding. DNA replication occurs using DNA polymerase. Double-stranded DNA produced, consisting of a template and a new strand of DNA. Temperature increased again to separate strands and the cycle begins again.

Back to Maisy, who is still pregnant!

Maisy’s baby MalcolmMartin After PCR what will be in the sample tubes? Millions of copies of the DNA section/fragment selected by Johanna. Remind yourself why Johanna wanted to amplify this fragment.

Johanna needs to find out the size of the DNA fragments inside each sample. She uses a technique called DNA gel electrophoresis, which separates DNA fragments based on their size. In the past this was done in tanks, using agarose gel electrophoresis, but laboratories now use an automated machine that can process many samples quickly using capillary gel electrophoresis.

The results are then processed by a computer, producing data like that shown above. This example shows the results of two different PCR samples. One of the DNA fragments is 121 base pairs in length, the other is 159 base pairs. If the PCR sample contains millions of DNA fragments, why would one sample only produce one data peak?

Yes, that’s right, the PCR reaction will amplify the same fragment many times. The technique, however, is not perfect and that is why sometimes you get the extra little peaks that you can see in the data above.

Here are Johanna’s data for three different DNA fragments from each of the meerkats Malcolm Martin Who is the daddy? Martin!

To make copies of the DNA you need to add to the PCR mix: DNA polymerase nucleotides of each base type. primer

PCR uses a special DNA polymerase – Taq polymerase Why? + Where is Taq from? + What is one of the problems with using it?

Taq polymerase is stable at high temperatures and is therefore perfect for PCR where the first step of each cycle requires temperatures of 94°C in order to denature the DNA. Taq comes from a thermophilic bacterium, Thermus aquaticus, which lives in hot springs or hydrothermal vents, hence its high temperature tolerance. The main problem with using it in PCR is that it doesn't have a mechanism for proofreading the DNA. This can lead to errors that are not corrected. Remember that PCR produces millions of copies from just one template. If a copy contains an error, for example a change in one of the base pairs, then that error will be copied millions of times, which is especially problematic if it occurs in an early cycle.

PCR Summary

DNA probes Once DNA has been amplified how is it searched?

What are DNA probes? DNA probes are pieces of DNA used to detect the presence of specific sequences in DNA. (Do not get probes mixed up with the primers used in PCR.) What characteristics will DNA probes need to have?

DNA probes Made of DNA Short Single stranded Complementary to the sequence being searched for

How do we find where the probes have bound? Before the DNA probe is introduced to the DNA it is fluorescently labelled. This involves attaching a fluorescent dye to the probe. For example, ethidium bromide fluoresces orange when bound to DNA and exposed to UV light.

Medical and forensic applications In groups discuss how DNA probes along with PCR can be used to: make a diagnosis of disease status or risk of disease onset identify if a particular individual left blood at a crime scene.

Making a diagnosis of disease status or risk of disease onset A cell sample from a patient can be screened for the presence or absence of a particular sequence, eg a mutation in a gene. This information can be used to diagnose a condition or describe the likelihood of a condition developing. For example, women with a family history of cancer can be tested for mutations in the BRCA 1 and BRCA 2 genes. Mutations in these genes can increase the risk of developing breast or ovarian cancer.

Identifying if a particular individual left blood at a crime scene DNA profiling allows the identification of individuals through comparison of regions of the genome with highly variable numbers of repetitive sequences of DNA. So if a tiny sample of blood is left at a crime scene, the DNA it contains can be amplified using PCR. A probe can then be created, which binds to one of these highly variable sequences. If a suspect is apprehended their DNA can be tested with the same probe to look for the sequence in question.

PCR - Summary Polymerase Chain Reaction (PCR) is the amplification of DNA using complementary primers for specific target sequences. DNA heated to separate strands then cooled for primer binding. Heat-tolerant DNA polymerase then replicates the region of DNA. Repeated cycles of heating and cooling amplify this region of DNA. Arrays of DNA probes are used to detect the presence of specific sequences in samples of DNA. The probes are short single stranded fragments of DNA that are complementary to a specific sequence. Fluorescent labelling allows detection. Applications of DNA profiling allow the identification of individuals through comparison of regions of the genome with highly variable numbers of repetitive sequences of DNA.