P&B ENGINEERING VISION r REMODELLING PROPOSAL

P&B ENGINEERING Utilising Feedervision as the base model Present relay for Venezuela job uses existing hardware from established Vision 2 hardware platform Extended front panel and switch/led addition to achieve ‘look’ of a larger device Software modified and re-written to create recloser functionality

P&B ENGINEERING

VISION r design driven by specific project requirements. Intention is to create a generic recloser relay to meet FKI requirements Make use of the existing cost advantage Absorb the functionality of high specification recloser applications Minimise wiring, programming, reduces peripheral equipment and commissioning time

P&B ENGINEERING New VISION r to be mechanically repackaged PCB layouts and circuitry to be consolidated using presently used BoM No deviation from existing and proven software & hardware knowledge base Better use of space within the relay New hardware arrangement to be utilised as the de facto 200 series drawout relay New platform also for retrofit products & repackaged FV2 and AFV2 relays

P&B ENGINEERING

New format will not negate existing look Maintained cost advantage by using existing BoM Structurally superior Inclusion of high current trip and close relays Connectors can be to FKI choice Ease of manufacture Finished product

P&B ENGINEERING