Hotel Room Intelligent System applications SMART-HDL

1.System Composition

Main Switch Route Work Monitor server Internet Smart-Hotel System schematic diagram Floor switch 1 Distribution box Host 1 Floor switch 2 Foreground 10/100M Ethernet Public control Distribution box Distribution box Host 2 Distribution box Host N …… more …… More floor

Smart-Hotel System schematic diagram Touch PanelMaster Card Door Bell Panel Emergency AC220V Power supplyMulti function output moduleHotel room control host INNER BUS Energy-saving lampTV Lighting Fan Connect with other rooms Floor Switch Ethernet MotorOthers Host distribution box Motion Sensor Air Condition Panel Air condition system S-BUS

Diagram for DEMO board L N INNER-BUS S-BUS Master CardPanelDLP Z-Audio Mix18 Room lampsFAN( to simulate an AC)Door Speaker Door Bell Ethernet Room Host Power LN

2. system application

1 Add a Room 2 Issue a Room card 3 Open the door with a room card 4 Insert a card for power 5 panel application ： Lamp/AC control 6 panel application ： Set service status clear-up/laundry/DND 7 panel application: Playing music Functions Show

1. Add a Room Step1. Launch the Hotel Manage Software Click ‘Add Room’ icon to add a room

1. Add a Room Step2. search room host Step3. select a device (room host) Step4. click to Add room (save and exit) ③ ② ④

1. Add a Room Step5. Click to view/edit

1. Add a Room Step6. Set Child module(Mix18) start loop 2.Right click here 1. Press the setting button of Multi function output module(Mix18) till the LED turn to red

1. Add a Room Step6. Set Child module(Mix18) start loop 3.Click to read start loop and set to loop1

1. Add a Room Step7. ① click to enter ’setup model’, ② enable Miracle Data Transmit ( 2 icon turn to black and white color). ①②

Card Writer (USB device, link to host PC) 2. Issue a Room Card

Step1. Click ‘CardReader’ icon to read and write a room card

2. Issue a Room Card Step2 Card Read Step3 set Card Type: guest/Visitor Valid Time: Today+Add Valid Area Count: 1 Valid Area: Build 01 Floor 01 Room 101 Step4 Card Write ② ③ ④

3. Open the door with a Room card Lock unlock

3. Open the door with a Room card ① ② ③ Step1. S-BUS software > door bell > Key assignation Step2. select Key no.2 RF switch Step3. Setup a relay to unlock/lock the door(CH16 relay on demo board)

3. Open the door with a Room card Step4. Auto lock setting When connecting a door magnetic sensor to one of the 2 Dry contacts, we can set it trigger to lock the door( once the sensor detect the door closed for a preset time)

Step5. set Room information( match with RF room card) 3. Open the door with a Room card Set Building / Floor / Room number

4. Insert a card for power ——Intelligent ID Identify Identified by the card, guest or waiter, will get differ control right to the room’s panels and devices by differ preset scene.

4. Insert a card for power Step1: view/edit ID from ‘Basic information’ label Step2: set Hotel Panel Setting in ‘basic setting’ label Enable/disable card authentication: if disabled, even a blank card will gain the right of room devices’ controlling step1step2

4. Insert a card for power Step3: set Card-Reader ID (enter a room > Setup mode > Room system data > ’Other’ label )

Step4: set Guest leave delay time We will set a scene ( when take out the room card, will trigger this scene to switch off all devices after ‘delay time’) 4. Insert a card for power Click to modify ① ②

Step5: appoint a scene order(4) for Occupancy – Null Scene 4. Insert a card for power 1.Selce Occupancy- Null Scene 2.Click to modify 3. Appoint scene4 for Occupancy- Null Scene

4. Insert a card for power Step6: appoint a scene order(8) for Occupancy – Visitor Scene 1.Selce Occupancy- Visitor Scene 2.Click to modify 3. Appoint scene8 for Occupancy- Visitor Scene

4. Insert a card for power Step7: setup scene4( Occupancy – Null Scene) ② ① Select and double click

2.Select all targets 2.Enbale to control set all loop light to 0 1.Enbale scene 4. Insert a card for power Step8: setup scene4( switch off all devices) 4.Save

4. Insert a card for power Step9: setup scene8( welcome scene, run for guest’s first enter) ② ① Select and double click

4. Insert a card for power Step10: edit scene8 for Occupancy – Null Scene 1.Select targets 2.Enbale to edit 3.Enbale scene 4.Save

4. Insert a card for power Step11: Save all settings to Module when finished Click to save ② ①

5. Panel application: lamps/AC control ① ② Step1: select a key and set Mode Step2: set control target(s): AC(CH1/2/3), Lamps( CH6/7/8/9), Dimming lamps(CH17/18)

6. Panel application: set service status Press a key to set in room. Show status outside

6. Panel application: set service status Step1: set Mode to single on/off Step2: set target Universal switch 1--Luandry, 2--DND,3--Clear-up ① ②

7. Panel application: Playing music control S-BUS

Step1: find your Z-Audio from S-BUS A SD-card (format by FAT32) is needed, to insert into the Z- Audio before power on. 7. Panel application: Playing music

Step2: Set on DLP’s Music page label, add Z-Audio’s subnet ID and device ID, and Zone No.(Zone No.: each DLP can control 24 Z- Audio, so DLP has 24 Zone No. for Z-Audio control.) 7. Panel application: Playing music