7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 1/7 OfficeServ 7200 Enterprise IP Solutions Data Server S/W Upgrade.

Slides:

Advertisements

Similar presentations

Intel Do-It-Yourself Challenge Networking

Advertisements

CCNA3: Switching Basics and Intermediate Routing v3.0 CISCO NETWORKING ACADEMY PROGRAM Chapter 6 – Switch Configuration Switch Configuration Starting the.

Boot Mode. Agenda 1.What can I do if I forget my password? 2.What to do if My Gateway can’t enter into [usr/config] mode?

© 2004 Cisco Systems, Inc. All rights reserved. Operating and Configuring Cisco IOS Devices Starting a Switch INTRO v2.0—8-1.

7400 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 1/16 OfficeServ 7x00 Enterprise IP Solutions Quick Install Guide.

SGI Confidential Application Processor. SGI Confidential Application Processor Overview Application Field Replaceable Units The Application.

hotEx RADIUS Manager Installation

1 Semester 2 Module 2 Introduction to Routers Yuda college of business James Chen

Cisco 2 - Routers Perrine & modified by Brierley Page 18/18/2015 Chapter 5 IOS Internet Operating System (IOS)

© 2004 Cisco Systems, Inc. All rights reserved. Managing Your Network Environment Managing Router Startup and Configuration INTRO v2.0—9-1.

What is Router? Router is a device which makes communication between two or more networks present in different geographical locations. Routers are data.

Chabot College ELEC autoinstall and SLARP.

© 2002, Cisco Systems, Inc. All rights reserved..

Computer System Laboratory

1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 6 Switch Configuration.

1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 6 Switch Configuration Cisco Networking Academy.

1 © 2003, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.0 Module 6 Switch Configuration.

1 CCNA 3 v3.1 Module 6 Switch Configuration Claes Larsen, CCAI.

HIGH CAPACITY PBX SYSTEM - MAINTENANCE -

Chap 5 Startup and Setup Andres, Wen-Yuan Liao Department of Computer Science and Engineering De Lin Institute of Technology

CCNA 3 Week 6 Switch Configuration. Copyright © 2005 University of Bolton Physical Details Available in variety of sizes –12 port, 16 port, up to 48 port.

1. Upgrading via the Network Booting Preparing Materials -PC server with a wired LAN port -Upgrade file for the network booting(bin type) Upgrade Procedure.

1 HIGH CAPACITY PUBLIC SWITCH SYSTEM - MAINTENANCE -

Ericsson-LG Enterprise Proprietary | | Page 1 Slide title 30 pt Text and bullet level 1 minimum 24 pt Bullets level 2-5 minimum 20 pt Do not.

Page 110/19/2015 Chapter 5 CCNA2 Chapter 5 Managing Cisco IOS Software.

Basic Router Configuration 1.1 Global configuration Cisco allows us to configure the router to support various protocols and interfaces. The router stores.

Ch.2 – Introduction to Routers

7400 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. -0/17- OfficeServ 7400 Enterprise IP Solutions Quick Install Guide.

FreelineUSA, Inc. Recovery from Corrupted Phone Book FL-USA 800 R

Router Fundamentals PJC CCNA Semester 2 Ver. 3.0 by William Kelly.

Business Enabled Communications

SAM9260-EK WinCE DEMO AT91 SAM9 Product Group. Version 1.0 October 2006.

7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 1/16 OfficeServ 7200 Enterprise IP Solutions Data Server S/W Upgrade.

Code : STM#561 Samsung Electronics Co., Ltd. OfficeServ SW Upgrade Distribution EnglishED01.

7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. -0/4- OfficeServ 7200 Enterprise IP Solutions - Data Server –

1 © 2004, Cisco Systems, Inc. All rights reserved. CCNA 3 v3.1 Module 6 Switch Configuration.

Introduction to Routers

AP-2000 Problem solving - Force Reload Entering Force Reload mode Force Reload is an emergency procedure to re-load the AP-2000 with new image file, when.

CCNA2 Chapter 2 Cisco IOS Software. Cisco’s operating system is called Cisco Internetwork Operating System (IOS) IOS provides the following network services:

Chapter 7 & 8 IOS Images and Router Configuration

EPM-Series Power Meter(N1913/14A) Firmware Upgrade Process.

© 2006 Cisco Systems, Inc. All rights reserved.Cisco PublicITE I Chapter 6 1 Router Initialization steps.

IOS Boot Procedure Can be set in Global Config –Router(config)#boot system flash If not in NVRAM as to where to get IOS, default is Flash If not in Flash,

Prestige NAND Flash DOWNLOAD. Prepare ＩＴＥＭ. 1.PC - Run Tftpd32 program. (Tftpd setup.exe install ) 2. Download DVR B/D 3. Download Serial B/D 4.

Installing VERITAS Cluster Server. Topic 1: Using the VERITAS Product Installer After completing this topic, you will be able to install VCS using the.

Printing solutions as easy as Cosmos Mono M6 Firmware Update Guide Digital Printing Division Samsung Electronics Company, Ltd.

Run the on your PC to start the firmware configuration process Run IP Config Tool.

Cisco 2 - Routers Perrine. J Page 16/26/2016 Chapter 2 Cisco IOS Software Cisco’s operating system is called Cisco Internetwork Operating System (IOS)

1 © 2004, Cisco Systems, Inc. All rights reserved. CCNA 2 v3.1 Module 2 Introduction to Routers.

WP1- Documentation Booting Petalinux from TFTP and using Network file system Section for developers Zynq 7020 R. Assiro.

1 Free Electrons. Kernel, drivers and embedded Linux development, consulting, training and support. http//free-electrons.com The U-boot bootloader Michael.

Router Components & Configuration. Router Components & Configurations Topics Physical components Memory components Configuration modes Keystroke shortcuts.

Configuring Network Devices

CCNA 2 v3.1 Module 2 Introduction to Routers

CCNA Routing and Switching Routing and Switching Essentials v6.0

CIT 384: Network Administration

Data Server S/W Upgrade Samsung Electronics Co., Ltd.

ELG) System Develop. Team

Router Startup and Setup

Cisco S2 C5 Router Startup.

CCNA 3 v3.1 Module 6 Switch Configuration

Chapter 10: Device Discovery, Management, and Maintenance

CCNA Routing and Switching Routing and Switching Essentials v6.0

Chapter 10: Device Discovery, Management, and Maintenance

Router Startup and Setup

Lecture9: Embedded Network Operating System: cisco IOS

Computer System Laboratory

OS7030 – How to upgrade the software to v4.93

Lecture9: Embedded Network Operating System: cisco IOS

Presentation transcript:

7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 1/7 OfficeServ 7200 Enterprise IP Solutions Data Server S/W Upgrade (Boot ROM) Jun, 2006 OfficeServ Lab. Samsung Electronics Co., Ltd.

7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 2/7 Boot ROM can be upgraded with boot loader. (above v1.23) 1.Connect the serial cable to the SIO port of board. This cable has to be connected with your local PC. (baud rate : 19200) 2.Turn on the system. 3.Please input “d” or “D” when following messages are displayed in serial console. Then system booting will be stopped, and changed to boot loader mode. NOTE (upgrade method of Boot ROM)

7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 3/7 4. Check boot loader environments. Boot loader environments should be changed if it incorrect. (Please input ‘printenv’) NOTE (upgrade method of Boot ROM)

7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 4/7 NOTE (upgrade method v1.1x -> v1.2x) 5. Change network parameters to connect WIM module to TFTP server. To upgrade software,WIM module has to be connected to TFTP server which has the entire package image. 6. Please save environments that you changed. Please input “saveenv” like following diagram. WIM => setenv ethaddr= WIM => setenv ethaddr 00:00:f0:48:23:12 <- MAC Address of WIM (if you need) WIM => setenv ipaddr <- IP address of WIM. WIM => setenv serverip <- TFTP server IP. WIM => setenv netmask <- Network mask. WIM => setenv pkgversion 1.21 <- Package version to be installed. WIM => setenv ethact eth0 (using eth0 interface) WIM => saveenv

7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 5/7 Environment(OS7200) TFTP server e.g. Execute the PumpKIN program. S/W package exists in the TFTP server directory Management PC Serial I/O cable TFTP root directory IP : Hub or Switch In this case we will use eth0 port NOTE (upgrade method of Boot ROM)

7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 6/7 7. Enter the “install bootldr” command install [os | firmware | configdb | logdb | all | bootldr ] os – Linux Kernel firmware – Root File System configdb – Config DB File System logdb – Log DB File System all - All of them (except Boot ROM) bootldr - Boot ROM Program (wim-bootldr.img-v1.24)  Then following messages are displayed in the serial console.  Please wait until the entire package would be installed successfully.  Maybe it takes about 20 minutes to install all package images. NOTE (upgrade method of Boot ROM)

7200 Samsung Confidential & Proprietary Information Copyright 2006, All Rights Reserved. 7/7 8. If upgrading procedure was done successfully, then you can boot the system with newly installed package image. Please input “boot”, then following messages will be displayed in the serial console 9. If above messages are displayed in the serial console, it indicates that system booting is one successfully. Then you can configure the system with upgrade software via Web page. NOTE (upgrade method of Boot ROM)