Design of High Voltage System Kyungju Ma & Reno Collaboratiors

Slides:

Advertisements

Similar presentations

Twisted Pair Cable Dense assembly (OD 5-7 mm) with –Twisted pairs : total 21; 44-pin mm dual row Omnetics connector differential signals single-ended.

Advertisements

MULTIPIN CONNECTOR CONNECTION RADIALL P/N Receptacle for cable and for 52 socket contacts A1932AP RADIALL P/N Plug for cable and for.

NA62 GTK Cables & Patch Panels. TCC8_GTK1 TCC8_GTK2_GTK3.

D. Peterson, “Status of the Cornell/Purdue Program” TPC R&D Mini Workshop, Orsay 12-January Status of the Cornell/Purdue Program: first events with.

BTeV RICH HV System. The RICH HV System Power One 24V – 1.2A TNG Matsusada HVPS HPD.

RPC Electronics Overall system diagram –At detector –Inside racks Current status –Discriminator board –TDC board –Remaining task.

Anthony AffolderUS CMS Meeting 12/3/02DAQ Based Systems LV/HV Needs DAQ Power Supply Needs HV à 600 V/~1mA range –0.1-1  A Current Sensing –Over Voltage/Current.

1 RPC HV cable pick-up noise issue C. Lu, Princeton University (10/26/2008) I pulled out some slides from my old DocDB files (DocDB#2209 and #406), and.

8/11/2006 FPIX TB meeting L. Perera 1 Pixel Power Supply Response Measurement Lalith Perera - Univ. of Iowa Carlos Florez, Simon Kwan, Charles Newsom,

January 25, 2003Richard Talaga1 High Voltage Distribution for RPCs Simple Model of Detector & HV Specifications & Requirements Simple HV Distribution Layout.

IFR/LST Meeting Feb 26, 2003K. Honscheid, Ohio State University High Voltage Requirements Commercial Solutions Custom Solutions.

ION CHAMBER INTRODUCTION TRANSITION - HANDOFF FROM EESIC SESSION 1 21 SLIDES TOTAL OCT

Status of LAV FEE electronics G. Corradi, C. Paglia, D. Tagnani & M. Raggi, T. Spadaro, P. Valente.

Subject: Mixed Connectors !!! ? What is it ? Why ? Provider? Samples….

Infrastructure for LHCb Upgrade workshop – MUON detector Infrastructure for LHCB Upgrade workshop: MUON power, electronics, cable Muon upgrade in a nutshell.

TF Joint Voltage Drop Instrumentation Robert Marsala (609) Hans Schneider (609) Engineering Operations August 7, 2003 TF_JOINT_Final_Design_Review.ppt.

1 LIGO-G V1 Magnetometer DC Power Assessment Magnetometers are distributed in the corner station and both end stations. The complete chain of one.

Low Voltage Power Requirement of TOF FEEs. Maximum tray. Low Noise:  Periodic and Random Distortion (PARD) < few mV RMS Floating.

Tray Factory Considerations Jean-Francois Genat UC LAPD Collaboration Meeting, June th 2010, Argonne. 1.

CAEN November 15, 2002 Vandelli W. 1 Test Conditions Prototype fed by CAEN Module 2527 through 100 m long cables From channels status page on generator.

LHCb F. Murtas Servizio elettronica G. Corradi D.Tagnani P.Ciambrone HV_GEM per LHCB M1R1 HV power supply Introduction Introduction HV_GEM Technical specification.

K.C.RAVINDRAN,GRAPES-3 EXPERIMENT,OOTY 1 Development of fast electronics for the GRAPES-3 experiment at Ooty K.C. RAVINDRAN On Behalf of GRAPES-3 Collaboration.

Figure 1: ICD Single Channel Block Diagram Schematic PMT High Voltage Supply (see Figure 4 & 4a) LED Pulser PMT Calibration (see Figure 6) ICD Scintillator.

The LST High Voltage System LST Readiness Review May 5, 2004 Klaus Honscheid Ohio State University.

Oct 29, 2001 Ron Sidwell 1 Purple Card. Oct 29, 2001 Ron Sidwell 2 Purple Card Spec Two channels per printed circuit board Size ~20 sq. in. or best effort,

The Alice-ToF HV system and the PVSS control system E. Scapparone for the Alice-Tof group DCS Workshop, June 16 - The ToF High Voltage layout ; - Component.

LUCID services G Avoni - D. Caforio LUCID BOLOGNA meeting1 Main topics: HV scheme (additional connections in pocket) Temperature probes New.

HV-Splitter for RENO Project S. Stepanyan, 김우영 경북대학교 Y.Kim Sejong University May-2008.

1 HD SIGNAL CONDITIONER SERIES POWER DISTRIBUTOR TRANSMITTER MODEL HD-IPC MODEL & SUFFIX CODE SELECTION HD-IPC MODEL ■ Input signal ■ Output1 signal ■

Adapting Muon Endcap UF/PNPI HV system for GEM V. Barashko, A. Korytov, A. Madorsky, G. Mitselmakher University of Florida/Physics N. Bondar, V. Golovtsov,

UF –PNPI HV system status August 2008 Sergey Volkov Nikolai Bondar PNPI.

January 15, 2003Richard Talaga1 High Voltage Distribution for RPCs Simple Model of Detector & HV Specifications & Requirements Simple HV Distribution Layout.

Test Tube Activities at Ohio State (8/5/03) Two (very useful) sub-group meetings after last weekly meeting –Mechanics (Bill, Lu, Mark, Jim, Charlie, Klaus)

Update on final LAV front-end M. Raggi, T. Spadaro, P. Valente & G. Corradi, C. Paglia, D. Tagnani.

Towards a final design of LAV front-end M. Raggi, T. Spadaro, P. Valente & G. Corradi, C. Paglia, D. Tagnani.

1/12/2010 R. CIARANFI 1 NEW NINO BOARD FOR RICH OLD AND NEW LOGISTIC NEW BOARD DESCRIPTION NEW MODULARITY 32 CH NEW FORM FACTOR FRONT END AREA AND DAQ.

7/28/2003DC/EC Review Aerogel Read out Electronics K. Ozawa, N. Kurihara, M. Inaba, H. Masui T. Sakaguchi, T. Matsumoto.

Front End Board (16 channels) Superlayer Cross Section Frontend Enclosure HV cap board HV cap Board Signals from chamber wires go to HV cap board to be.

12 September 2006Silicon Strip Detector Readout Module J. Hoffmann SIDEREM SIlicon Strip DEtector REadout Module.

Proposal for LST-based IFR barrel upgrade Roberto Calabrese Ferrara University Workshop on IFR replacement, SLAC, 11/14/2002.

Assumptions: Cockcroft-Walton photomultiplier bases are the same for all ECAL sections Digital to analog converters are installed on the distribution boards.

9/18/2003Safety Review Electronics Electronics design LV, HV power supply Fusing Heat.

Preparation of chamber training g. passaleva. Gaps to be trained We have O (100) gaps that have tripped at least once since June At a quick glance they.

12/10/01 - Cecilia Gerber UIC Slide 1 Testing Card specifications l Will be used in the Run2b SASEQ-based test stands  needed. Build 75, two.

PHENIX Safety Review Overview of the PHENIX Hadron Blind Detector Craig Woody BNL September 15, 2005.

Chiho Wang ATLAS TRT Duke University IU, Oct Fuse Box Design & Mounting Chiho Wang Duke University.

E Ethernet C CAN bus P Profibus HV HV cables LV LV cables (+busbar) S Serial (RS232) Signal cable Other/Unknown Liquid or Gas Cable and/or Bus PCI-XYZ.

Drift Chamber Review Jefferson Lab 6-8 March 2007 CLAS12 Drift Chamber Electronics R. Chris Cuevas Group Leader -- Fast Electronics Jefferson Lab Physics.

PandaX 实验中的电子学概述郭国栋 Outline Introduction Original scheme Improved scheme PMT base design in PandaX I and PandaX II Decoupler design in.

Design summary Status of the development & production - test run with S3a and S3b prototype - performance tests To do list for production & development.

The new SVD Power Supplies o General requirements o Power supplies structure o Tender process o Test system 2/10/2014SVD Power Supplies1 F.Forti, INFN.

TRIPLEGEM and VFATs at The Test Beam Area TRIPLEGEM and VFATs at The Test Beam Area N. Turini……reporter Eraldo Oliveri! Eraldo Oliveri main worker! N.

A few points that need discussion today (Gerard) UH needs golden front boards (2?), golden HVB (1), and HV cabling to PS with the correct connectors. IU.

Specifications Asic description Constraints Interface with PDM board Planning Summary.

ATLAS TRT Duke University CERN, Feb Fuse Box Status Duke University.

Low Voltage Power Supplies: towards design specifications Henryk Palka, IFJ PAN Krakow (for WP team: Krakow, Prague, KEK) DEPFET-Belle Meeting Karlsruhe,

High Voltage Power Supply for RPC Suvendu Nath Bose, Satyajit Saha, Sudeb Bhattacharya, Saha Institute of Nuclear Physics, Kolkata,, Description Presently.

HF ROBOX PRR3 Apr 2003E. Hazen HF Front-End Electronics ● System Description – Overview – PMT Board, ROBOX, Patch Panel – Signal Cable, Front-end boards.

Test beam straw prototype production status

AA/S 4.1 Analogue Actuator AAM/S 4.1 Analogue Actuator Module

Calorimeter Mu2e Development electronics Front-end Review

음향 시스템 사양서 POWER SUPLY WITH 3.5 PHOENIX CONNECTOR AMX: PSN6.5

Mini-drawers, FE-ASIC , Integrator

PMT cabling Gian Luca Raselli INFN Pavia

Front-end electronic system for large area photomultipliers readout

Pierluigi Paolucci - I.N.F.N. Naples

Overview of T1 detector T1 is composed by 2 arms

HCAL HV splice box.

NPS/CPS/COMCAL - Readout

RPC Electronics Overall system diagram Current status At detector

Presentation transcript:

Design of High Voltage System Kyungju Ma & Reno Collaboratiors 9th RENO collaboration meeting, Oct 10, 2008

CAEN SY1527

CAEN HV Floating Power Supply Boards

48 Channel 3kV Distributor Board-CAEN A1932A One Primary and 48 distributed Channels 0 ~3kV output voltage Available with either positive or negative polarity 200mV Voltage Set/Monitor resolution Voltage ripple smaller than 30mV pp Programmable TRIP parameter 1~500Volt/sec programmable Ramp Up/Down Common Floating Return VMAX Trimmer for hardware maximum voltage adjustment A1932A

External Connections and Ordering option Components of front pannel External connectors Output Channels(1…48), Floating Ground(FAGND), IINT IEXT Multi connector Radiall 691803004 Type, 52pin male( to be mated with Radiall 691802002) FAGND Radiall R921921 socket, 2mm AGND PASSIVE INTERLOCK 00-type LEMO connector SIGNAL INTERLOCK Ordering Option Code Description WA1932APAAAA A1932AP-SY1527H.V.channels+3kV/500uA-Multipin Conn.(48ch) WA995XAAAAAA A995-insertion/extraction tool Radiall 282549024 for A996 WA996XAAAAAA A996-52 pin cable connector for A173XB-A183XB-A1932A-A1535 Mod. A1932A front pannel

Needed Parts for HV Distributer

HV Distribution Box Design

Circuit Diagram of the HV Distribution Box High Voltage and PMT signal Decoupler Board Circuit 49.9k, 1% 10K 4.7nF,3kV 49.9k, 1% 100k, 1% FAG AG 48 47 Radiall 48 pin contacts of Radiall 52 connector Circuit Diagram of the HV Distribution Box

PMT HV Splitter-TESTED R7081 PMT and HV supplying and signal lead circuit

Undecided part HV distributor to Qbee Board 48 RG303 PMT single cable SHV connector SHV mountable connector Radiall Receptacle plug Radiall plug& multi HV Coaxial cable PMT input Card HV distribution Box (CAEN A1932A) Qbee Board HV & Signa Decoupler Box Undecided part 48 ch. PMT Signal connection to Qbee board

48Ch HV supply 48Signal from PMT 19 inch(475mm)

Example for BOX Design

LEMO multi Coaxial Connector

LEMO S-Series Dimension

LEMO 5B, 5K

Harting Mini coax mini connector

Harting mini Coax connector cable assemble

Qbee board PMT input Card pin list and dimension

SUMMARY Circuit diagram of the HV PS Distribution Box is confirm HV Distribution Supply module decide : CAEN Mod. A1932A Circuit diagram of the HV PS Distribution Box is confirm HV supply board to HV PS distribution box connection decide HV PS Distribution Box to Qbee board connection study