Lt Col Bill Andrews, NATCAP Wg G1000 SAR GRID TECHNIQUES

Lt Col Bill Andrews, NATCAP Wg G1000 Setup For Lat/Long Display Consider Aux Pg 3 to set degrees, minutes, hundredths Select Menu, Map Setup, Land Group: - Text Med or Large (gives L/L text) - Range > than display (suggest 100) (displays Lat/Long lines) For Lat/Long in minutes.hundredths (W instead of W 77 52’ 30”) To display lat/long lines and lat/long labels

Lt Col Bill Andrews, NATCAP Wg With Lat/Long displayed, The cursor is fairly easy to Place on L/L coordinates to create user waypoints L/L of cursor displays for coordinate refinement Recommend we use a naming standard of Grid #/letter and corner This leads to the question: once we start filling up waypoints, which ones can we erase? Easy G1000 User Waypoint Setup How To: 1. Wpt /User page 2. Depress cursor knob and move to waypoint 3. Hit Enter 4. Give it a name

Lt Col Bill Andrews, NATCAP Wg G1000 Inflight Use – Grid Search Option 1: PFD 10 mi scope (situational awareness), MFD 2 mi scope (accuracy) Select a PFD inset scale large enough to display enough of the search grid for situational awareness Select 2 mi range on the MFD—this displays L/L in ½ mile grids The grid lines can be hard to see with topo background selected. Recommend turning topo off and terrain on (for altitude alerting <1000’—note: the terrain grids are also ½ mile sections)

Lt Col Bill Andrews, NATCAP Wg G1000 Inflight Use – Grid Search Option 2: PFD 5000’ scope (accuracy), MFD as required (situational awareness) 5000’ PFD inset scale gives a display of ½ mile lat/long grids. May need to turn topo off to read grids. Select MFD scale as desired for situational awareness