China Gracemac Paper Limited

1 Lift the printer cover door.

2 Press the blue button inside the printer compartment. The printer roller component will pop out of its position.

3 Take-out the printer roller component and remove the old paper roll from the printer compartment

4 Insert the new paper roll into the rear section of the printer compartment.

5 Pull the end of the roll forward so that the paper lies between the two printer roller pivots.

6 Press the printer roller component into position on top of the two printer roller pivots and the paper below it.

7 Feed the end of the paper through the slot in the printer cover door.

8 Close the printer cover door.

9 Tear off excess paper tape protruding from the slot. The thermal printer is ready for printing activities.

10 Thanks For Looking! Back