Kverneland new metering device 2016

New metering device Similar dimension like old metering device Antistatic housing Fully integrated electric drive New e-com software to steer the system

New metering device Gear without any need to adjust Air suck bypass Central arm for calibration test flap Toolless dismountable flap for heavy seeds

New metering device Toolless dismountable flap Different rotors for different seeds Calibration flap sensor Rotor recognition, no wrong use possible Remote control for Calibration start/stop/break

Easy access for calibration and maintenance 1. Design/ Technical Features - Hopper & Dosing

Calibration flap with integrated gate – no seed dropping into the hose. Penstock as standard. Remote control for calibration test at the metering unit. Emptying flaps in hopper New metering device

Metering Units ESA II- e-Com– ISOBUS 2 Metering units as standard Speed signal via radar Machine Control New software surface. Electronic transducer systems allow depth control for disc harrow and seed depth via tractor terminal (optional for seeding depth) Speed signal via radar Headland Management – fully automized hydr. functionality while turning – –User friendly –Only one double acting valve required (with exception of the fan drive) Tractor Requirements: 12V >70A New metering device in combination with u-drill Electric & ISOBUS

Changeable rotor no 1

Changeable rotor no 2

Changeable rotor no 3

Changeable rotor no 4

Impressions

Calibration flap Flap open Flap closed Central arm to open calibration test flap

Impressions Penstock Working position cleaning position

Impressions Dosing unit Calibration flap with integrated gate – no seed dropping into the hose Rotor no 2 and red rubber sealing

See our Machines at work on YouTube visit us at The Future of Farming