Copy to Tape TOI

2 Copy to Tape TOI Agenda Overview1 Technical Feature Implementation2 Q&A3

3 General Overview

4 OpenStorage copy to tape lets you copy NetBackup backup images directly from OpenStorage devices to the tape drives that are directly attached to the storage server or attached to an NDMP host. This feature allows for the customer to perform direct Copy to Tape operations via SLP (storage lifecycle policies). The Media Server is not a data mover for this type of operation and that results in network bandwidth savings – as the data movement only has to make one hop. This is a new feature to NetBackup.

5 Technical Feature Implementation

6 Process/data flow (option 1) –Data flows directly from the OpenStorage Device to the Tape Robot

7 Technical Feature Implementation Process/data flow –Data flows from the OpenStorage Device, through the NDMP Server to the Tape Robot

Requirements 8 The following are the requirements to use OpenStorage copy to tape: The OpenStorage disk appliance must support the OpenStorage copy to tape specification published by the Symantec OpenStorage Partner Program. The copy to tape capability uses a subset of the NDMP File Service Extension (FSE)commands.

Requirements 9 In this document, disk appliance NDMP host refers to the host that provides the OpenStorage copy to tape support. The host may be the disk appliance storage server, an alternative name (that is, interface) for the storage server, or a separate host that interacts with the disk appliance. Regardless, the host must support the OpenStorage copy to tape specification. The host to which the destination tape drives are attached must be an NDMP tape server that NetBackup supports. For supported systems, see the NetBackup for NDMP Administrator’s Guide. Ideally, all of these functions reside on a single host.

Requirements 10 The read side media server must run NetBackup or later. NetBackup selects the read side media server from the NetBackup media servers that have credentials for the disk appliance NDMP host. To allow all of the OpenStorage data movers (that is, NetBackup media servers) to function as read side servers, upgrade all of them to NetBackup

Requirements 11 One of the read side media server’s tasks is to ensure that the disk appliance NDMP host supports the OpenStorage copy to tape specification. The write side media server can run NetBackup 6.5 or later. The destination storage unit specifies the write side media server. The write side media server requests resources from the NDMP tape server and initiates and monitors the copy operation.

Installation Install the NetBackup for NDMP software on the NetBackup media servers that connect to the NDMP tape server. 2. In NetBackup, configure the NDMP tape server as an NDMP host. 3. In NetBackup, configure NDMP host credentials for the NDMP tape server.

Use In NetBackup, configure the NDMP tape server storage devices. 2. In NetBackup, configure the storage units that use the NDMP tape server storage. The storage units must be configured as NDMP storage units. 3. Create the storage server on each media server you wish to use for either backups or duplications.

Use (continued) Use the command: /usr/openv/netbackup/bin/admincmd/nbdevquery liststs –U This will obtain the name of the disk appliance NDMP host. If the name of the disk appliance NDMP host is different than the disk appliance storage server name, add the credentials for that NDMP host to NetBackup. Please note that you will need to add credentials for the storage server to NetBackup if the name of the disk appliance NDMP host and the disk appliance are the same (single host). Use the tpconfig command for this step. 14

Resources 15 Documentation is available in the standard NetBackup documentation (Admin Guide). Note- The output of the “nbdevquery –U” command has been changed to display the direct Copy to Tape capability and the corresponding NDMP hostname.

Limitations 16 The following limitations exist: ■ The destination storage unit must be NDMP and not a Storage Unit Group. ■ You cannot make multiple copies with one copy operation. ■ Backup images are not multiplexed when written to tape. ■ If the disk appliance NDMP host does not support NDMP FSE, copy operations travel through NetBackup media servers.

Troubleshooting 17 Troubleshooting methods are similar to standard NDMP Tape Server and BPDuplicate troubleshooting methods.

Logs and Messages Key Log Messages: Log: /usr/openv/netbackup/logs/admin “NDMP Direct Copy will be attempted” -> good “NDMP Direct Copy will not be used” -> bad “DUPREADLINE: READ: NDMP_DC_ENABLED=1” -> good User initiated duplications: In the “Results” tab of the Catalog GUI: “Initiating OpenStorage Direct to Tape” -> good 18

Logs and Messages (continued) In the event of a failure, support will need to see the following: –bptm logs for read and write media servers –admin logs for duplication server (typically this is the Master server) –VxVL logs for mds (event id 143) and NDMP (event ids 151 and 134) 19

20 Q & A

21 NDMP org is the definitive source for NDMP specifications. Here is the NDMP org website faq: Here is a good overview doc on NDMP: r2.ppt#279,29,Slidehttp:// r2.ppt#279,29,Slide 29 Search sourceforge.net for NDMP FSE. Here is the download link for NDMP FSE: ar.gz?use_mirror=cdnetworks-us-1 Links and Resources

22 Copyright © 2008 Symantec Corporation. All rights reserved. Symantec and the Symantec Logo are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other names may be trademarks of their respective owners. This document is provided for informational purposes only and is not intended as advertising. All warranties relating to the information in this document, either express or implied, are disclaimed to the maximum extent allowed by law. The information in this document is subject to change without notice.© 2008 Symantec Corporation. All rights reserved. Thank You!